BTCPower TM Broadband TelCom Power, Inc. Redefining “Current” Limits In Power Conversion 2A-N Series 1.0 To 1.5W DC-DC Converters Features • • • • • 24-Pin DIP Package Pi Input Filter Unregulated Outputs Low Ripple and Noise 70% Efficiency Model Number Output Voltage Output Current Input Current No Load Full Load 2A-01N 5 VDC 220 mA 115 mA 330 mA A 2A-02N 12 VDC 125 mA 115MA 420 mA A 15 VDC 100 mA 115mA 420 mA A 2A-04N ±12 VDC ±62 mA 115 mA 420 mA A 2A-05N ±15 VDC ±50 mA 115 mA 420 mA A 2A-11N 5 VDC 220 mA 45 mA 120 mA A 2A-12N 12 VDC 125 mA 45 mA 165 mA A 15 VDC 100 mA 45 mA 165 mA A 2A-14N ±12 VDC ±62 mA 45 mA 165 mA A 2A-15N ±15 VDC ±50 mA 45 mA 165 mA A 2A-03N 2A-13N Input Voltage 5VDC 12VDC Case Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840•www.btcpower.com •Email: [email protected] DS LP 2A-N Rev2 16-1-04 2A-N Series 1.0 To 1.5W DC-DC Converters BTCPower TM Specifications Input Specifications: Input Voltage Range…………….…………………...……………..10% Input Filter………………………………………………………..Pi Type Output Specifications: Voltage Accuracy…………….. ………………………….+/- 3.0 % max. Ripple & Noise, 20 MHz BW………………….….… 100 mV p-p max. Temperature Coeffcient………………………… +/- 0.02 % / ºC max. Short Circuit Protection………………………………..……Momentary Line Regulation² ……………………….………….……..+/- 1.2 % max. Load Regulation³, EC2A01N…………. …………….….+/- 8.0 % max. All other models…………………………………………..+/- 6.0 % max. General Specifications : Efficiency………………………………………………..……..60%~80% Isolation Capacitance………………………………………..…….30pF Isolation Resistance…………………………………………..100Mohm Switching Frequency………………………………….…..20 KHz, min. Operating Temperature Range…………………………-25ºC ~ +71ºC Case Temperature………………………………………….100 ºC max. Cooling……………………………………………….Free air convection Storage Temperature Range……………………..…..-40 ºC ~ +100ºC Isolation Voltage………………………….………………..500VDC min. Suffix “H” Models……………………………………...……3K VDC min. Dimensions………….……1.25” x 0.8” x 0.4 “(31.8 x 20.3 x 10.2 mm) Case Material……………………..Non-Conductive Black Plastic Suffix “M” Models(Material)…………..Black Coated Copper with Non-conducted base Outline Information and Pin-out PIN CONNECTION PIN 500VDC Single Dual Output Output +V input PIN 3K VDC Single Output Dual Output 1 2,3 +V input +V input 1 24 +V input 2 23 NC -V output 22, 23, 24 -V input -V input 3 22 NC Common 10 11 NP Go output 10 -V output Common 12 -V output -TP 11 +V output +V output 13 +V output -V output 12 -V input -V input 14 NP NP 13 -V input -V input 15 NP +V output 14 +V output +V output 16 NP +TP 15 -V output Common 17 +TP NP * NP---No Pin * TP---Test Point * NC---No connection with pin * Go---Ground Note: 1. 15uF 35V, Tantalum capacitor acorss each output. 2. Line regulation is per 1.0% change in input voltage 3. Load regulation is for load change from 100% to 20% All dimensions are in inches [mm] All pins sizes are dia. 0.02” [0.508mm] and 0.14”[0.35mm] length The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840•www.btcpower.com •Email: [email protected] DS LP 2A-N Rev2 16-1-04