BTCPower TM Broadband TelCom Power, Inc. Redefining “Current” Limits In Power Conversion 5B Series 15W DC-DC Converters Features • • • • • • • 15W Isolated Output 2:1 Input Range 82% Efficiency Pi Input Filter Low Ripple And Noise Continuous Short Circuit Protection Conductive EMI Meet EN55022 Class A Model Number 5B-11 5B-12 5B-13 5B-14 5B-15 5B-16 5B-21 5B-22 5B-23 5B-24 5B-25 5B-26 Input Voltage 18-36 VDC 36-72 VDC Output Voltage Output Current Min. Max. Input Current No Load Full Load % Efficiency 5 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC ±5 VDC 150 mA 65 mA 50 mA ±35mA ±25mA ±75mA 3000 mA 1250 mA 1000 mA ±625mA ±500mA ±1500mA 20 mA 20 mA 20 mA 30 mA 30 mA 30 mA 800 mA 780 mA 780 mA 780 mA 780 mA 780 mA 78 80 80 80 80 80 5 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC ±5 VDC 150mA 65mA 50mA ±35mA ±25mA ±75mA 3000mA 1250mA 1000mA ±625mA ±500mA ±1500mA 10 mA 10 mA 10 mA 15 mA 15 mA 15 mA 390 mA 380 mA 380 mA 380 mA 380 mA 380 mA 80 82 82 82 82 82 Note: Nominal Input Voltage 24, or 48VDC Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS LP 5B Rev2 16-1-04 Case B B 5B Series 15W DC-DC Converters BTCPower TM Specifications Input Specifications: Input Voltage Range…………………….24V……………..……18-36V 48V…………………..36-72V Input Filter………………………………………………………..Pi Type Output Specifications: Voltage Accuracy……………Single output…...……….+/- 1.0 % max. Dual output………...….+/- 1.0 % max. Voltage Balance ( Dual )………………………………...+/- 1.0 % max. Transient Response Single 25% Step Load Change…………………………….<500ìsec. Dual FL. 1/2L+/-1% Error Band…………………………….<500ìsec. Ripple & Noise, 20 MHz BW………………………… 75 mV p-p max. Temperature Coeffcient………………………… +/- 0.02 % / ºC max. Short Circuit Protection………………………………..……Continuous Line Regulation ¹ Single / Dual Output………….……..+/- 0.2 % max. Load Regulation ² Single / Dual Output……………...….+/- 1 % max. General Specifications : Efficiency………………………………………………..……...see table Isolation Voltage………………………….………………..500VDC min. Isolation Resistance…………………………………………..100Mohm Switching Frequency……………………………………..200 KHz, min. Operating Temperature Range…………………………-25ºC ~ +71ºC Case Temperature………………………………………….100 ºC max. Cooling……………………………………………….Free air convection Storage Temperature Range……………………..…..-40 ºC ~ +100ºC EMI / RFI…………………………………………………..Six sied shield Dimensions………………..……2” x 1” x 0.4“ (50.8 x 25.4 x 10.2 mm) Case Material…….………………………….Black Coated Copper with Non-conducted base Note: 1.Measured from high line to low line; 2.Measured from full load to ¼ load; 3.Minimum load on the output is necessary to maintain regulation. Outline Information and Pin-out PIN CONNECTION Pin Function 1 + Input 2 - Input 3 + Output 4 Common / NP 5 - Output * NP---No Pin All dimensions are in inches [mm] The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS LP 5B Rev2 16-1-04