CMJ0130 THRU CMJH180 w w w. c e n t r a l s e m i . c o m DESCRIPTION: The CENTRAL SEMICONDUCTOR CMJ0130 series types are silicon field effect current regulator diodes designed for applications requiring a constant current over a wide voltage range. These devices are manufactured in the epoxy molded, low profile SOD-123FL case. Special selections of IP (regulator current) are available for critical applications. SURFACE MOUNT SILICON CURRENT LIMITING DIODE MARKING: SEE MARKING CODES ON ELECTRICAL CHARACTERISTICS TABLE SOD-123FL CASE FEATURES: • High Reliability • Special Selections Available • Superior Lot to Lot Consistency • Leaded Devices Available MAXIMUM RATINGS: (TA=25°C) Peak Operating Voltage (CMJ0130 THRU CMJ5750) Peak Operating Voltage (CMJH080 THRU CMJH180) Power Dissipation Operating and Storage Junction Temperature Thermal Resistance SYMBOL POV POV PD TJ, Tstg ΘJA 100 50 500 -65 to +150 250 UNITS V V mW °C °C/W ELECTRICAL CHARACTERISTICS: (TA=25°C unless otherwise noted) Regulator Current (Note 1) Minimum Dynamic Impedance IP @ VT=25V ZT @ VT=25V MIN mA NOM mA MAX mA MΩ kΩ V %/°C CMJ0130 0.05 0.13 0.21 6.0 2,000 0.6 +2.10 to +0.10 101 CMJ0300 0.20 0.31 0.42 4.0 1,000 0.8 +0.40 to -0.20 301 CMJ0500 0.40 0.515 0.63 2.0 500 1.1 +0.15 to -0.25 501 CMJ0750 0.60 0.76 0.92 1.0 200 1.4 0.0 to -0.32 701 CMJ1000 0.88 1.1 1.32 0.65 100 1.7 -0.10 to -0.37 102 CMJ1500 1.28 1.5 1.72 0.45 70 2.0 -0.13 to -0.40 152 CMJ2000 1.68 2.0 2.32 0.35 50 2.3 -0.15 to -0.42 202 CMJ2700 2.28 2.69 3.1 0.30 30 2.7 -0.18 to -0.45 272 CMJ3500 3.0 3.55 4.1 0.25 20 3.2 -0.20 to -0.47 352 CMJ4500 3.9 4.5 5.1 0.20 10 3.7 -0.22 to -0.50 452 CMJ5750 5.0 5.75 6.5 0.05 5.0 4.5 -0.25 to -0.53 562 CMJH080 6.56 8.2 9.84 0.32 15 3.1 -0.25 to -0.45 822 CMJH100 8.0 10 12 0.17 6.0 3.5 -0.25 to -0.45 103 CMJH120 9.6 12 14.4 0.08 3.0 3.8 -0.25 to -0.45 123 CMJH150 12 15 18 0.03 2.0 4.3 -0.25 to -0.45 153 4.6 -0.25 to -0.45 183 Minimum Knee Impedance Maximum Limiting Voltage Temperature Coefficient (Note 2) Type ZK @ VK=6.0V VL @ IL=0.8 x IP MIN CMJH180 16 18 20 0.02 1.8 Notes: 1) Pulsed Method: Pulse Width (ms) = 27.5 divided by IP NOM (mA) 2) The Temperature Coefficient is measured between + 25°C and +50°C. TC Marking Code R2 (5-October 2010) CMJ0130 THRU CMJH180 SURFACE MOUNT SILICON CURRENT LIMITING DIODE SOD-123FL CASE - MECHANICAL OUTLINE LEAD CODE: 1) Cathode 2) Anode MARKING: SEE ELECTRICAL CHARACTERISTICS TABLE R2 (5-October 2010) w w w. c e n t r a l s e m i . c o m CMJ0130 THRU CMJH180 SURFACE MOUNT SILICON CURRENT LIMITING DIODE TYPICAL ELECTRICAL CHARACTERISTICS Regulator Current vs Voltage R2 (5-October 2010) w w w. c e n t r a l s e m i . c o m