RC SPECIFICATIONS Switch Function Electrical Ratings Electrical Life Contact Resistance Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature SPST, DPST 10A @ 125VAC/250VAC 10,000 cycles typical < 50 mΩ initial 1000Vrms min > 100MΩ min -40°C to 85°C -40°C to 85°C - E222871 MATERIALS Actuator Housing Contacts Terminals 6/6 Nylon 6/6 Nylon AgCdO Brass, Sn Plated ORDERING INFORMATION 1. Series: RC 1 1 2 2 RC 2. Number of Poles: 1 = SPST 2 = DPST 3. Switch Function: 1 = OFF-ON 2 = OFF-(ON) 4. Housing Color: 1 = White 2 = Black 3 = Red 9 = Gray 5. Actuator Color: 1 = White 2 = Black 3 = Red 9 = Gray 3T = Red (Transparent) **For use with Illuminated options** 4T = Yellow (Transparent) **For use with Illuminated options** 5T = Green (Transparent) **For use with Illuminated options** 6T = Blue (Transparent) **For use with Illuminated options** 6. Actuator Marking: A E B F C G D H 7. Terminal Options: C = .187” Quick Connects / Solder Lug P = PC Pins R = Right Angle PC Pins L = Left Angle PC Pins 8. Illumination Options: (For use with transparent actuators only) Blank = Non-Illuminated A = 125VAC Neon Bulb B = 240VAC Neon Bulb C = 6VDC Tungsten Lamp D = 12VDC Tungsten Lamp E = 24VDC Tungsten Lamp C C www.citswitch.com page 217 phone – 763.535.2339 fax – 763.535.2194 RC DIMENSIONS SCHEMATIC & PC LAYOUTS SPST DPST P TERMINALS SPST ILLUMINATED DPST ILLUMINATED R&L TERMINALS ACTUATOR MARKING OPTIONS A B C D E F TERMINAL OPTIONS C R P PANEL THICKNESS .75 ~ 1.25 “X” DIMENSION mm 19.3 +/- .1 1.25 ~ 2.00 19.5 +/- .1 2.00 ~ 3.00 19.9 +/- .1 L www.citswitch.com page 218 phone – 763.535.2339 fax – 763.535.2194