CITR2 CIRCUIT BREAKER WITH ON/OFF CAPABILITY This unique circuit breaker consists of a thermal circuit breaker and a rocker switch style housing. When an overload condition occurs, the contacts will break apart. By returning the actuator to the OFF position, then back to ON, the circuit breaker mechanism with reset. SPECIFICATIONS Electrical Ratings Electrical Life Contact Resistance Dielectric Strength Insulation Resistance Interrupt Capacity Operating Temperature Storage Temperature 8A, 10A, 12A, 15A @ 125VAC 10,000 cycles typical < 30 mΩ max initial @ 2-4VDC, 100mA 3000Vrms min (Terminal – Terminal) > 1,000MΩ min 1000A @ 125VAC -40°C to 85°C -40°C to 85°C - E198027 MATERIALS ←RoHS COMPLIANT Actuator Housing Rivits Contacts Terminals PC (Poly Carbonate) Nylon Aluminum AgSnO2 Brass TRIP TIMES / CURRENT LEVELS % of Rated Current 100 150 200 300 400 500 600 Trip Time No Trip < 1 Hour 3.5 – 60 Sec. 0.7 – 10 Sec. 0.35 – 5 Sec. 0.2 – 2.8 Sec. 0.1 – 1.8 Sec. ORDERING INFORMATION 1. Series: CITR2 15 CITR2 2.Contact Ratings: 08 = 8A 10 = 10A 12 = 12A 15 = 15A 3. Termination Options: Q1 = Short Quick Connects Q2 = Long Quick Connects RP = Right Angle PC Pins 4. Lamp Options: N = No Lamp, Opaque Red Actuator L = 125VAC Neon, Translucent Red Actuator K = No Lamp, Translucent Red Actuator G = 125VAC Neon, Translucent Green Actuator H = No Lamp, Translucent Green Actuator 5. Printing Options: None = No Printing S = Reset / OFF Website: www.citswitch.com Q2 L S Tel: 763-535-2339 Fax: 763-535-2194 CITR2 DIMENSIONS Q1 Q2 RP SCHMATICS, PC LAYOUT, & PANEL MOUNTING WITHOUT LAMP THICKNESS WITH LAMP 125VAC NEON, 25K HOURS, 68KΩ Res. Website: www.citswitch.com 0.8 ~ 1.0 1.1 ~ 1.4 1.5 Tel: 763-535-2339 DIM “A” 28.4 28.8 29.0 +.1 / -.0 +.1 / -.0 +.1 / -.0 Fax: 763-535-2194