DA Series Miniature Single Pole Rocker Switches Typical Applications • Small appliances • Computers and peripherals • Medical instrumentation Features/Benefits • Nice actuator styling with multiple options • Guards to prevent accidental actuation • Momentary and maintained functions • IP65 splash proof rubber boot option • RoHS compliant Specifications Materials CONTACT RATING: UL/CSA: 16 AMPS @ 125 VAC, 1/3 HP; 10 AMPS @ 250 VAC, 1/2 HP. VDE: 10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC. ELECTRICAL LIFE: 10,000 make and break cycles at full load. INSULATION RESISTANCE: 108 Ω min. HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish. ILLUMINATED ACTUATOR: Polycarbonate, matte finish. CENTER CONTACTS: Silver plated, copper alloy. END CONTACTS: Silver plated AgSn02ln03. ALL TERMINALS: Silver plated, copper alloy. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level. OPERATING TEMPERATURE: -20ºC to +85ºC NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-58 through G-60. For additional options not shown in catalog, consult Customer Service Center. Switch Function DA101 SPDT On-None-On DA102 SPST On-None-Off DA103 SPDT On-Off-On DA12 * SPST On-None-Off Actuator J1 Rocker J2 Two-tone rocker J3 Illuminated rocker J4 Circle, illuminated rocker J5 Oval, illuminated rocker Actuator Color 1-5 See Chart on Page G-59 R Red, illuminated A Amber, illuminated G Green, illuminated Contact Rating QF Silver * DA12 — for switches with both marking and illumination Lamp Rating (NONE) No lamp 6 LED 7 125 VAC neon 8 250 VAC neon Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–57 www.ck-components.com Rocker Mounting Style/Color S2 Snap-in, black S1 Snap-in, white B2 Recessed snap-in bracket, black G2 Guard, black Termination 15 .187” quick connect 17 Solder lug 02 Thru-hole A Right angle Actuator Marking (NONE) No marking D ON-OFF H ”O l” - international ON-OFF N Large dot P ”O -” international ON-OFF G DA Series Miniature Single Pole Rocker Switches SWITCH FUNCTION CONNECTED TERMINALS SWITCH FUNCTION NO. POLES SP C&K marking on opposite side C&K marking on opposite side MODEL NO. DA101 ON NONE ON DA102 ON NONE OFF DA103 ON OFF ON 2-3 N/A SCHEMATIC OR OR 2-1 For 7 & 8 For Illuminated Illuminated Versions Version Only + – For 6 Illuminated Versions Only DA12 * * ON NONE OFF DA12 - for switches with both marking and illumination Shown in Pos. 1 ACTUATOR J1 J3 J2 ROCKER TWO-TONE ROCKER ILLUMINATED ROCKER Rocker .142 (3,6) NOTE: J3 actuator available with DA102 & DA12 switch functions, 7&8 lamp ratings and not available with O2 and A termination options. .389 (9,88) NOTE: 1. Available with DA102 switch function only. 2. Available with None or P actuator marking options only. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–58 www.ck-components.com DA Series Miniature Single Pole Rocker Switches ACTUATOR J4 J5 CIRCLE, ILLUMINATED ROCKER OVAL, ILLUMINATED ROCKER .389 (9,88) .142 (3,6) .389 (9,88) .142 (3,6) NOTE: Available with DA102 switch function and 7 & 8 lamp ratings combinations only. Not available with O2 and A termination options. NOTE: Available with DA102 switch function and 6 lamp rating combinations only. Not available with O2 and A termination options. ACTUATOR COLOR OPTION CODE For J1only For J3, J4, J5 only 2 1 3 R A G ACTUATOR COLOR OPTION CODE ACTUATOR COLOR BOTTOM TOP BLACK 1 2 3 4 5 WHITE RED RED, ILLUMINATED AMBER, ILLUMINATED GREEN, ILLUMINATED WHITE RED WHITE BLACK RED WHITE BLACK WHTE BLACK RED J2 actuator only MOUNTING STYLE/COLOR S2 S1 B2 SNAP-IN, BLACK SNAP-IN, WHITE RECESSED SNAP-IN BRACKET, BLACK .080 (2,03) 1.200 (30,48) .820 (20,83) 1.244 (31,60) NOTE: Available with DA10X switch functions only. S2, S1 & G2 PANEL MOUNTING Actuator shown in Pos. 1 G2 GUARD, BLACK .350 (8,89) .940 (23,88) PANEL THICKNESS 0.030-0.049 (0,75-1,25) 0.049-0.079 (1,25-2,0) 0.079-0.118 (2,0-3,0) .700 (17,78) “X” 0.756-.004 (19,2-0,1) 0.764-.004 (19,4-0,1) 0.779-.004 (19,8-0,1) “Y” 0.512+.004 (13,0+0,1) 0.512+.004 (13,0+0,1) 0.512+.004 (13,0+0,1) PANEL THICKNESS 0.030-0.049 (0,75-0,25) 0.049-0.079 (1,25-2,0) 0.079-0.118 (2,0-3,0) “Y” 1.068 (27,13) 1.076 (27,33) 1.092 (27,74) Rocker B2 PANEL MOUNTING 1.064 (27,03) NOTE: Available with DA10X switch functions only. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–59 www.ck-components.com G DA Series Miniature Single Pole Rocker Switches TERMINATION 15 17 .187” QUICK CONNECT SOLDER LUG 0.870±.020 (22,10±0,5) 0.079 (2,0) 0.071 (1,8) 0.039 (1,00) 0.161 (4,1) For switches with LED option 02* A* THRU-HOLE RIGHT ANGLE * NOTE - O2 and A termination options not offered with J3, J4 or J5 actuator options. ACTUATOR MARKING NONE NO MARKING D ON-OFF H N Ol LARGE DOT P O- All models shown in Pos. 1 NOTE: Orientation of actuator marking and terminals. CONTACT MATERIAL OPTION CODE CONTACT AND TERMINAL MATERIAL RATINGS 16 AMPS @ 125 VAC; 1/3 HP; 10 AMPS @ 250 VAC; 1/2 QF SILVER POWER (UL/CSA). 10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC (VDE) * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. ACCESSORIES Rocker LAMP RATING (NONE) NO LAMP 6 LED RATING @ 10 mA Vf=1.85V 7 125 VAC 33kΩ NEON 8 250 VAC 150kΩ NEON 216C00000 .748 (19,0) IP65 SPLASH PROOF RUBBER BOOT .551 (14,0) .787 (20,0) .957 (24,3) .142 (3,6) .295 (7,5) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–60 www.ck-components.com