POWER SWITCHES FOR INDUSTRIAL APPLICATION G SERIES GE SERIES MINIATURE SWITCHES UL, CSA LISTED FEATURES HOW TO ORDER bPanel design, 6 kinds of actuators are available. bBoth silver and gold-plated contact are available. The gold-plated contact is for low current application. bTerminals are sealed with epoxy, which prevent solder or flux from flowing into the switch. bTerminal shape: Solder terminal, P/C terminal, Horizontal terminal, Vertical terminal and W/W terminal. b94V-O grade materials are used. IN CASE OF TOGGLE SWITCHES G 1 01 S Y Z B Series Code Switch Function Code 1 Pole 2 Pole 101 103 201 203 ON ON OFF ON ON AC125V 5A, AC250V 2A(resistive load) DC30V 2A(resistive load) Low current: DC20V max 0.4VA K L1 Lever Lock Long T Large SERIES W/W Code Contact Y Î＝8.9 Threaded for Z, C, W Terminals B Q Gold-Plated Silver Contact Î＝7.1 non-threaded for A, AV2, V30 S & M types only(Toggle without Threaded Bushing) Shape Code Actuator Toggle S Standard Toggle without Threaded Bushing J5 J60 Large Snap-in J1 J3 J50 Small Large Snap-in Lever Rocker FEATURES Applying the Rocker Switch with its incorporated Fuse onto your unit/tools, the following convenience will be provided; bIt will help to avoid switching the wrong buttons by recognizing the high lighted switches' On or Off position. bAll T-models do possess an Incorporated Fuse, which saves not only space on your unit, but also time to replace old fuses. bMounting of the fuse incorporated rocker switches onto the panel can be easily performed, because all models are "snap-in types". M Short Toggle without Threaded Bushing J2 J1 Small Lever Small Rocker Not indicated in switch body. ・・ ROCKER SWITCHES WITH FUSE BOXES UL, CSA, TUV, SEMKO, DEMKO LISTED When you need specific legend on switches,. please contact us. . (UL, CSA, TUV, etc.) HOW TO ORDER L L A 1 5 L 1 Series Code Model L Rocker Switch Snap-in type Code Rating w/Neon Lamp Function Code Circuit ※ ※ 1 2 − A D SP ST ON SP DT ON 2-3 2-3 OFF − − ON 1-2 K N DP ST ON DP DT ON 2-3 5-6 2-3 5-6 OFF − − ON 1-2 4-5 ※The lighted rocker switches are only acceptable with switching function in Code A(SP・ST) and K(DP・ST). [EXAMPLE] T-L-A-1-5-L-1 Fuse Incorporated・Rocker Switch, Snapin type・SP・ST・Rating 10A 125V AC. w/ neon lamp or 10A 125V/250V AC. w/o neon lamp・Amp Terminal#250・With integral neon lamp; actuator is transparent orange colored button or without integral neon lamp; black button. Code Terminal 10A 125V AC 10A 250V AC 5 TAB#250 Code Rating w/o Neon Lamp 1 10A 125V AC Button Color W/Neon Lamp 10A 250V AC Code Button Types L Transparent F Flat Shaped C Curved Shaped A FEATURES The M series switches have been newly designed to meet a growing demand for more miniature switches than 'F' series, for ideal use in spacelimited areas. This low-profile series features molded-in' terminals and low cost prices lesser than the F series. Single and double pole versions in both ON・NONE・ON and ON・ OFF・ON functions are available with a choice of terminals of soldering or P.C.B. mountig. w/o Neon Lamp Neon Lamp Incorporated or not 1 Transparent Orange Colored Black W/Neon Lamp 2 Transparent Red Colored Red 3 Transparent Green Colored W/O Neon Black is the standard color of the button of a rocker switch which has not a neon lamp incorporated. (Others are optional) Lamp Please note that the above code number of the color option is not marked on the switch. Manual soldering temperature: 270℃ 3 seconds Max. SUBMINIATURE STANDARD TOGGLE SWITCHES CSA LISTED HOW TO ORDER M T D 3 0 1 W Series Code Model T Standard Toggle Code SP DP D E F N P R Function ON ON ON NONE ON OFF ON NONE〈ON〉 〈 〉Momentary 10 ● W Bushing Angle Shaped M AV2 Vertical V30 P/C mount holder GE 1 01 S D1 Z Q ※ ※Color of Actuator Shape Code Actuator Lever J2 Small L Terminal Solder lug P/C Horizontal Code ※Color of Actuator SERIES Z C A WASHABLE TYPE G 1 01 J1 Z B ※ Rocker Code Standard Short Flat D9 LEVER/ROCKER SWITCHES The information on the "G" Series discontinuance as of October '05 was announced before, but we have decided to continue to produce the G101, G103, G201, G203, because of users' strong request. Actuator S M P3 Panel Mounting Watertight type Standard Actuator(Toggle) Code Rating 3 3A 125V, 250V. AC Code 1 3 Terminal Solder lug P/C Made to order basis. POWER SWITCHES FOR INDUSTRIAL APPLICATION ・・ UL, CSA, TUV, SEMKO, DEMKO, FIMKO, LISTED SNAP-IN LIGHTED ROCKER SWITCHES T FEATURES HOW TO ORDER Applying the LIGHTED ROCKER SWITCHES on your tools, the following convenience will be provided; bIt will help to avoid switching the wrong ones by recognizing the high lighted switches' ON or OFF position. bBy mounting the transparent colored lighted NEON-LAMP SWITCHES, either in orange, green or red available, on to your panel/unit, etc..., even in dark place we assure easy recognizable ON/OFF position. bThree combination types of switching function and the lighted lamp are provided, i.e. the type 1; switching function is in on-position and the lamp is lighted, the 2; switching function is in off-position and the lamp is lighted, and the type 3; switching function is in either on-or off-position and the lamp is lighted always. bMounting of the lighted rocker switches onto the panel can be very easily performed, because all models are snap-in types. SERIES When you need specific legend on switches, please contact us. . . (UL, CSA, TUV, etc.) T L A 1 5 L 1 Series Code Model L Rocker Switch Snap-in type Code Rating w/Neon Lamp 1 10A 125V AC Function Code Circuit ※ ※ A D 2 − SP ST ON SP DT ON 2-3 2-3 Code Terminal 5 TAB#250 10A 250V AC Code Rating w/o Neon Lamp 1 10A 125V AC OFF − − ON 1-2 Button Color W/Neon Lamp 10A 250V AC OFF K DP ST ON 2-3 5-6 − 1-2 N DP DT ON 2-3 5-6 − ON 4-5 ※The lighted rocker switches are only acceptable with switching function in Code A(SP・ST) and K(DP・ST). [EXAMPLE] T-L-A-1-5-L-1 Rocker Switch, Snap-in type・SP・ ST・Rating 10A 125V AC. Amp Terminal#250・With integral neon lamp; actuator is transparent orange colored button or without neon lamp; black button. Button Types Code L Transparent w/o Neon Lamp Neon Lamp Incorporated or not 1 Transparent Orange Colored Black W/Neon Lamp 2 Transparent Red Colored Red 3 Transparent Green Colored F Flat Shaped C W/O Neon Lamp Curved Shaped A Angle Shaped Black is the standard color of the button of a rocker switch which has not a neon lamp incorporated. (Others are optional) Please note that the above code number of the color option is not marked on the switch. To be marketed at a later date. ・・ UL, CSA, TUV, SEMKO, DEMKO, FIMKO, VDE LISTED SNAP-IN ROCKER SWITCHES V FEATURES SERIES LED INCORPORATED TYPE DUST-PROOF TYPE In addition to the standard snap-in rocker switch, LED version becomes available. ON/OFF condition can be confirmed more easily. bSnap-in panel mounting bTAB#187 Terminal(Single pole) In addition to the standard snap-in rocker switch, dust-proof version becomes available. bSnap-in panel mounting bTAB#187 Terminal bDust-proof constructed inside design SNAP-IN ROCKER SWITCHES WITH L.E.D. V L A O 4 L 1 V L K 5 3 HOW TO ORDER Series Series Code Model Code Rating L Rocker Snap in Mounting 0 6A 125V AC 6A 250V AC Function Code Circuit A − SP ST ON 2-3 − Code Actuator L Rocker with LED Code Terminal 4 TAB#187 (Applicable to Solder) Code Model L Rocker Snap in Mounting Code L.E.D. Color min./DC max./DC AMP 1 2 Yellow Red 2.1V 1.7V 2.5V 2.0V 3 Green 2.1V 2.5V 20mA Code Terminal 1 Solder lug 3 P.C. Board Function Code Circuit − ■Note: Code numbers do not appear on switches. K OFF Code Rating 5 10A SP ST ON 2-3 5-6 NONE OFF ＊VLK5( ) is also available with vertical T/H terminals. ＊VLK41・43 types will be discontinued as of March, 2007. SNAP-IN DUST-TIGHT ROCKER SWITCHES V L A O 4 A 1 Code Actuator Color 1 Black Series Code Model Code Rating L Rocker Snap in Mounting 0 6A 125V AC 6A 250V AC 2 Red ■Note: Code number of color does not appear on a switch. A − SP ST ON 2-3 − OFF Series Code Model L Rocker Snap in Mounting Code Actuator Legend Function Code Circuit V L A O 4 HOW TO ORDER A Imprint B Imprint Terminal C Imprint 4 TAB#187 (App. as Solder Term) D No Marking 0 1 Function Code Circuit Code Code Rating A D SP ST SP DT NONE NONE Bar/Circle Imprint Coding Code Terminal 4 TAB#187 − ON ON 6A 3A OFF OFF 11 ● POWER SWITCHES FOR INDUSTRIAL APPLICATION ・・ UL, CSA, TUV, SEMKO, DEMKO, FIMKO, LISTED SNAP-IN LIGHTED ROCKER SWITCHES T FEATURES HOW TO ORDER Applying the LIGHTED ROCKER SWITCHES on your tools, the following convenience will be provided; bIt will help to avoid switching the wrong ones by recognizing the high lighted switches' ON or OFF position. bBy mounting the transparent colored lighted NEON-LAMP SWITCHES, either in orange, green or red available, on to your panel/unit, etc..., even in dark place we assure easy recognizable ON/OFF position. bThree combination types of switching function and the lighted lamp are provided, i.e. the type 1; switching function is in on-position and the lamp is lighted, the 2; switching function is in off-position and the lamp is lighted, and the type 3; switching function is in either on-or off-position and the lamp is lighted always. bMounting of the lighted rocker switches onto the panel can be very easily performed, because all models are snap-in types. SERIES When you need specific legend on switches, please contact us. . . (UL, CSA, TUV, etc.) T L A 1 5 L 1 Series Code Model L Rocker Switch Snap-in type Code Rating w/Neon Lamp 1 10A 125V AC Function Code Circuit ※ ※ A D 2 − SP ST ON SP DT ON 2-3 2-3 Code Terminal 5 TAB#250 10A 250V AC Code Rating w/o Neon Lamp 1 10A 125V AC OFF − − ON 1-2 Button Color W/Neon Lamp 10A 250V AC OFF K DP ST ON 2-3 5-6 − 1-2 N DP DT ON 2-3 5-6 − ON 4-5 ※The lighted rocker switches are only acceptable with switching function in Code A(SP・ST) and K(DP・ST). [EXAMPLE] T-L-A-1-5-L-1 Rocker Switch, Snap-in type・SP・ ST・Rating 10A 125V AC. Amp Terminal#250・With integral neon lamp; actuator is transparent orange colored button or without neon lamp; black button. Button Types Code L Transparent w/o Neon Lamp Neon Lamp Incorporated or not 1 Transparent Orange Colored Black W/Neon Lamp 2 Transparent Red Colored Red 3 Transparent Green Colored F Flat Shaped C W/O Neon Lamp Curved Shaped A Angle Shaped Black is the standard color of the button of a rocker switch which has not a neon lamp incorporated. (Others are optional) Please note that the above code number of the color option is not marked on the switch. To be marketed at a later date. ・・ UL, CSA, TUV, SEMKO, DEMKO, FIMKO, VDE LISTED SNAP-IN ROCKER SWITCHES V FEATURES SERIES LED INCORPORATED TYPE DUST-PROOF TYPE In addition to the standard snap-in rocker switch, LED version becomes available. ON/OFF condition can be confirmed more easily. bSnap-in panel mounting bTAB#187 Terminal(Single pole) In addition to the standard snap-in rocker switch, dust-proof version becomes available. bSnap-in panel mounting bTAB#187 Terminal bDust-proof constructed inside design SNAP-IN ROCKER SWITCHES WITH L.E.D. V L A O 4 L 1 V L K 5 3 HOW TO ORDER Series Series Code Model Code Rating L Rocker Snap in Mounting 0 6A 125V AC 6A 250V AC Function Code Circuit A − SP ST ON 2-3 − Code Actuator L Rocker with LED Code Terminal 4 TAB#187 (Applicable to Solder) Code Model L Rocker Snap in Mounting Code L.E.D. Color min./DC max./DC AMP 1 2 Yellow Red 2.1V 1.7V 2.5V 2.0V 3 Green 2.1V 2.5V 20mA Code Terminal 1 Solder lug 3 P.C. Board Function Code Circuit − ■Note: Code numbers do not appear on switches. K OFF Code Rating 5 10A SP ST ON 2-3 5-6 NONE OFF ＊VLK5( ) is also available with vertical T/H terminals. ＊VLK41・43 types will be discontinued as of March, 2007. SNAP-IN DUST-TIGHT ROCKER SWITCHES V L A O 4 A 1 Code Actuator Color 1 Black Series Code Model Code Rating L Rocker Snap in Mounting 0 6A 125V AC 6A 250V AC 2 Red ■Note: Code number of color does not appear on a switch. A − SP ST ON 2-3 − OFF Series Code Model L Rocker Snap in Mounting Code Actuator Legend Function Code Circuit V L A O 4 HOW TO ORDER A Imprint B Imprint Terminal C Imprint 4 TAB#187 (App. as Solder Term) D No Marking 0 1 Function Code Circuit Code Code Rating A D SP ST SP DT NONE NONE Bar/Circle Imprint Coding Code Terminal 4 TAB#187 − ON ON 6A 3A OFF OFF 11 ●