AUDIO PCB MINI JACK DIN SOCKETS SECTION 6 3 - 9 way available Unshielded, half shielded and full shielded available Competitively priced Industry Compatible Mates with DBCMD11 series PCB mounting SPECIFICATION Contact resistance (DCR 0.1A): 1. Initial, before any testing: (1) Pin to contact or (NC) 30mΩ (2) Plug shield to socket or (NO) 50mΩ 2. After life test with mating plug: (1) Pin to contact or (NC) 60mΩ (2) Plug shield to socket or (NO) 100mΩ Insertion Force: 0.5kg - 4.0kg Terminals withstand a 500g minimum pull for 10 seconds Extraction Force: 0.5kg - 3.5kg before movement or breakage occurs Soldering Heat: Terminal for PC board temperature: 260±5°C for 5 ± 1.0 seconds Operating temperature range: -25°C to 100°C Insulating resistance: More than 100MΩ by 500v DC at 90-95% RH, 40°C Voltage test: Withstand 0.5mA 500v AC between any open terminal for one minute Lifetime: Withstand more than 5000 cycles insertion and withdrawal with testing plug Rated voltage: 16vdc Rated current: 20mA - 0.3A OUTLINE DRAWING DBCMD0508 - Unshielded Pin Configuration DBCMD0508A - Top, Left and Right Shielded Pin Configuration DBCMD0509 - Fully Shielded Pin Configuration ORDERING INFORMATION DBC MD 0508 -4 Dubilier Connectors Mini Din Connector Series Nº of Ways 0508 = Unshielded 0508A = Half shielded 0509 = Fully shielded 161 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758