Ribbon Cable Connector (Pin Header) HIF3E Series ■Features 1. Product Variation The straight type connector is connected vertical to the printed board, and the right angle type connector is connected horizontal to the printed board. 2. Compatibility This pin header is compatible with HIF3B series. ■Applications Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc. ■Product Specifications Current rating: 1A Voltage rating: 200V AC Rating Item Operating Temperature Range:–55 to +85ç (Note 1) Operating Moisture Range:40 to 80% Storage Temperature Range:–10 to +60ç (Note 2) Storage Humidity Range:40 to 70% (Note 2) Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 15m ohms max. 0.1A 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle (–55ç: 30 minutes ➝15 to 35ç: 5 minutes max. 125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 500 cycles 7. Durability (Mating/un-mating) Contact resistance: 15m ohms max. 8. Resistance to Soldering heat No deformation of components affecting performance. Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Part Material Finish Remarks Insulator PBT Black UL94V-0 Contact Brass selective gold plating --------------- ■Ordering Information HIF3E 1 - * P A - 2.54 DS 2 3 4 5 6 1 Series Name: HIF 3E 5 Contact Pitch: 2.54mm 2 Number of contacts: 8, 10, 12, 16, 18, 20, 6 Contact type DSS: Right angle type 26, 30, 34, 40, 50, 60 DSA: Straight type 3 P: Pin header 4 A: Selective gold plating B53 ■Right Angle Pin Header Unit: mm Part Number CL No. Number of Contacts A B HIF3E-10PA-2.54DS 614-0041-0 10 13.7 10.16 HIF3E-12PA-2.54DS 614-0050-0 12 16.24 12.7 HIF3E-16PA-2.54DS 614-0042-2 16 21.3 17.78 HIF3E-18PA-2.54DS 614-0051-3 18 23.86 20.32 HIF3E-20PA-2.54DS 614-0043-5 20 26.4 22.86 HIF3E-26PA-2.54DS 614-0044-8 26 34.0 30.48 HIF3E-30PA-2.54DS 614-0045-0 30 39.1 35.56 HIF3E-34PA-2.54DS 614-0046-3 34 44.2 40.64 HIF3E-40PA-2.54DS 614-0047-6 40 51.8 48.26 HIF3E-50PA-2.54DS 614-0048-9 50 64.5 60.96 HIF3E-60PA-2.54DS 614-0049-1 60 77.2 73.66 ■Dip Pin Header Unit: mm Part Number B54 Number of Contacts A HIF3E- 8PA-2.54DSA 614-0072-3 CL No. 8 11.2 7.62 HIF3E-10PA-2.54DSA 614-0061-7 10 13.7 10.16 HIF3E-12PA-2.54DSA 614-0070-8 12 16.24 12.7 HIF3E-16PA-2.54DSA 614-0062-0 16 21.3 17.78 HIF3E-18PA-2.54DSA 614-0071-0 18 23.86 20.32 HIF3E-20PA-2.54DSA 614-0063-2 20 26.4 22.86 HIF3E-26PA-2.54DSA 614-0064-5 26 34.0 30.48 HIF3E-30PA-2.54DSA 614-0065-8 30 39.1 35.56 HIF3E-34PA-2.54DSA 614-0066-0 34 44.2 40.64 HIF3E-40PA-2.54DSA 614-0067-3 40 51.8 48.26 HIF3E-50PA-2.54DSA 614-0068-6 50 64.5 60.96 HIF3E-60PA-2.54DSA 614-0069-9 60 77.2 73.66 B