2KBP005 - 2KBP10 SILICON BRIDGE RECTIFIERS PRV : 50 - 1000 Volts Io : 2.0 Amperes KBP 0.71 (18.0) 0.63 (16.0) FEATURES : * * * * * * * High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board Pb / RoHS Free 0.825 (20.95) 0.605 (15.36) + AC AC 0.035 (0.89) 0.028 (0.71) 0.500 (12.7) MIN. MECHANICAL DATA : 0.16 (4.00) 0.14 (3.55) 0.276 (7.01 ) 0.236 (5.99) 0.105 (2.66) 0.085 (2.16) * Case : Molded plastic * Epoxy : UL94V-O rate flame retardant * Terminals : Plated lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 3.4 grams Dimensions in inches and ( millimeter ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL 2KBP 005 2KBP 01 2KBP 02 2KBP 04 2KBP 06 2KBP 08 2KBP 10 UNIT V Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Output Current Ta = 55°C IF(AV) 2.0 A IFSM 60 A I2t 15 A2S VF 1.1 V IR 10 µA IR(H) 500 µA CJ 25 pF RθJA 30 °C/W TJ - 50 to + 165 °C TSTG - 50 to + 165 °C Peak Forward Surge Current, Single sine wave Superimposed on rated load (JEDEC Method) Rating for fusing ( t < 8.3 ms. ) Maximum Instantaneous Forward Voltage drop per element at 3.14 Amp. Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage per element Ta = 125 °C Typical Junction Capacitance per element (Note 1) Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range Notes : 1 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2 ) Thermal resistance from Junction to Ambient with units mounted on a 0.47" X 0.47" ( 12mm X 12mm ) Cu. Pads. Page 1 of 2 Rev. 02 : March 24, 2005 RATING AND CHARACTERISTIC CURVES ( 2KBP005 - 2KBP10 ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 80 60 Hz, Resistive or inductive load. PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 2.0 1.5 1.0 P.C. Board Mounted with 0.47" X 0.47" ( 12mm X 12mm ) Cu. pads. 0.5 70 60 Ta = 55 °C 50 40 30 20 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 10 0 0 0 25 50 75 100 125 150 175 1 2 AMBIENT TEMPERATURE, ( °C) FIG.3 - TYPICAL FORWARD CHARACTERISTICS 10 Pulse Width = 300 µs 1 % Duty Cycle 1.0 0.1 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 6 10 20 40 60 100 1.2 FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES PER ELEMENT 0 4 NUMBER OF CYCLES AT 60Hz 1.4 10 TJ = 100 °C 1.0 TJ = 25 °C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE PER ELEMENT CAPACITANCE , pF 100 40 20 10 TJ = 25 °C f = 1MHz Vsig = 50mVp-p 4 2 1 0.1 0.2 0.4 1 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 24, 2005