KBL400G - KBL410G GLASS PASSIVATED BRIDGE RECTIFIERS PRV : 50 - 1000 Volts Io : 4.0 Amperes KBL FEATURES : * * * * * * * * 0.77 (19.56) 0.73 (18.54) Glass passivated chip High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board Pb / RoHS Free 0.825 (20.95) 0.605 (15.36) + AC AC 1.0 (25.4) MIN. 1.1 (27.94) MIN. MECHANICAL DATA : 0.052 (1.32) 0.048 (1.22) * Case : Molded plastic * Epoxy : UL94V-O rate flame retardant * Terminals : Plated lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 5.15 grams 0.085 (2.16) 0.065 (1.65) 0.265 (6.73 ) 0.235 (5.97) 0.200 (5.08) 0.190 (4.82) Dimensions in inches and ( millimeter ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL KBL KBL KBL KBL KBL KBL KBL 400G 401G 402G 404G 406G 408G 410G UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current Ta=50°C IF(AV) 4.0 A IFSM 150 A VF 1.1 V Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage per Diode at IF = 4 A Maximum DC Reverse Current Ta = 25 °C IR 10 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 1.0 mA RθJA 19 °C/W TJ - 50 to + 150 °C TSTG - 50 to + 150 °C Typical Thermal Resistance ( Note 1 ) Operating Junction Temperature Range Storage Temperature Range Note : 1 ) Thermal resistance from Junction to Ambient with units mounted on a 3" X 3" X 0.11" THK ( 7.5cm X 7.5cm X 0.3cm ) Cu. plate. Page 1 of 2 Rev. 02 : March 24, 2005 RATING AND CHARACTERISTIC CURVES ( KBL400G - KBL410G ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 Mounted on 3" X 3" X 0.11" THK ( 7.5cm X 7.5cm X 0.3cm ) Cu. plate. 3.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 4.0 2.0 1.0 175 150 125 100 75 50 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 25 60 Hz, Resistive or inductive load. 0 0 0 25 50 75 100 125 150 175 1 AMBIENT TEMPERATURE, ( °C) 4 6 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES FIG.3 - TYPICAL FORWARD CHARACTERISTICS PER DIODE 100 FORWARD CURRENT, AMPERES 2 NUMBER OF CYCLES AT 60Hz Pulse Width = 300 µs 1 % Duty Cycle 10 1.0 TJ = 25 °C 0.1 100 TJ = 125 °C 10 1 TJ = 25 °C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 06 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 24, 2005