Certificate TH97/10561QM GR15-G ~ GR20-G Certificate TW00/17276EM HIGH VOLTAGE FAST RECOVERY RECTIFIER PRV : 1500 - 2000 Volts Io : 0.5 Ampere DO-215AC FEATURES : 2.6 ± 0.2 4.3 ± 0.2 2.4 ± 0.2 * Glass passivated chip * High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop * Fast switching for high efficiency * Pb / RoHS Free 1.4 ± 0.2 6.1 ± 0.2 Dimensions in millimeters MECHANICAL DATA : * Case : DO-215AC Molded plastic * Epoxy : UL94V-O rate flame retardant * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.060 gram (Approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL GR15-G GR20-G UNIT Maximum Recurrent Peak Reverse Voltage VRRM 1500 2000 V Maximum RMS Voltage VRMS 1050 1400 V Maximum DC Blocking Voltage VDC 1500 2000 V Maximum Average Forward Current IF(AV) 0.5 A IFSM 20 A Maximum Peak Forward Surge Current, 8.3ms Single half sine wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at I F = 0.1 A VF Maximum DC Reverse Current Ta = 25 °C IR 5.0 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 50 µA 2.0 2.6 300 500 V Maximum Reverse Recovery Time ( Note 1 ) Trr ns Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C Note : (1) Reverse Recovery Test Conditions :FI = 0.5 A, IR = 1.0 A, Irr = 0.25 A. Page 1 of 2 Rev. 03 : July 13, 2007 Certificate TH97/10561QM Certificate TW00/17276EM RATING AND CHARACTERISTIC CURVES ( GR15-G ~ GR20-G ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 Ω Trr 10 Ω + 0.5 A D.U.T. + 0 PULSE GENERATOR ( NOTE 2 ) 50 Vdc (approx) 1Ω - 0.25 OSCILLOSCOPE ( NOTE 1 ) - 1.0 A SET TIME BASE FOR 50/100 ns/cm 1 NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 25 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD OUTPUT CURRENT, (A) 0.5 0.4 0.3 0.2 0.1 8.3 ms SINGLE HALF SINE WAVE Ta = 50 °C 20 15 10 5 60Hz RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 0 175 1 AMBIENT TEMPERATURE, ( °C) FIG.4 - TYPICAL FORWARD CHARACTERISTICS GR15-G REVERSE CURRENT, (μA) FORWARD CURRENT, (A) 6 10 20 40 60 100 10 Pulse Width = 300 μs 2% Duty Cycle TJ = 25 °C 0.1 GR20-G 0.01 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 FORWARD VOLTAGE, (V) Page 2 of 2 4 FIG.5 - TYPICAL REVERSE CHARACTERISTICS 1.0 0.001 2 NUMBER OF CYCLES AT 60Hz 2.6 2.8 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) Rev. 03 : July 13, 2007