SAW Components SAW Duplexer WCDMA Series/type: B7967 B39212B7967P810 Date: Version: November 09, 2011 2.0 EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Application ■ Low-loss SAW duplexer for WCDMA femtocell sys■ ■ ■ ■ tems Low insertion attenuation Low amplitude ripple Usable passband 60 MHz High power durability Features 0.65 3 4 8 0.4 2 0.6 0.5 1 9 6 1.1 5 1.0 7 bottom view 0.5 Package size 3.0 * 2.5 * 1.0 mm3 RoHS compatible Approx. weight 0.035 g Package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals ■ Electrostatic Sensitive Device (ESD) ■ Moisture Sensitivity Level 3 ■ ■ ■ ■ side view 2.5 3.0 Pin configuration ■ ■ ■ ■ ■ 3 1 6 2, 4, 5 7, 8, 9 top view 2, 4, 5, 7, 8, 9 RX Output TX Input Antenna To be grounded To be grounded 1 3 6 Please read cautions and warnings and important notes at the end of this document. 2 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characterisitcs TX - ANT min. Center frequency fC Maximum insertion attenuation 2110.0 ... 2170.0 Amplitude ripple (p-p) 2110.0 ... 2170.0 max. - typ. @ 25 ˚C 2140.0 - 2.0 2.5 dB - 0.6 1.0 dB % - αmax MHz ∆α MHz EVM1) Error Vector Magnitude 2112.4 ... 2167.6 MHz - 0.4 1.0 Input VSWR (TX port) 2110.0 ... 2170.0 MHz - 1.8 2.2 Output VSWR (ANT port) 2110.0 ... 2170.0 MHz - 1.8 2.2 α Attenuation 1) MHz 10.0 ... 1920.0 MHz 35 38 - dB 1920.0 ... 1960.0 MHz 44 49 - dB 1960.0 ... 1980.0 MHz 44 50 - dB 2250.0 ... 2400.0 MHz 35 46 - dB 2400.0 ... 2500.0 MHz 35 45 - dB 2500.0 ... 3000.0 MHz 35 45 - dB 3000.0 ... 3800.0 MHz 30 40 - dB 3800.0 ... 4220.0 MHz 25 38 - dB 4220.0 ... 4340.0 MHz 25 37 - dB 4340.0 ... 5000.0 MHz 20 36 - dB 5000.0 ... 6330.0 MHz 15 25 - dB 6330.0 ... 6510.0 MHz 20 30 - dB Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 3 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characterisitcs ANT - RX min. Center frequency fC Maximum insertion attenuation 1920.0 ... 1980.0 Amplitude ripple (p-p) 1920.0 ... 1980.0 max. - typ. @ 25 ˚C 1950.0 - 2.2 3.0 dB - 1.0 1.8 dB % - αmax MHz ∆α MHz EVM1) Error Vector Magnitude 1922.4 ... 1987.6 MHz - 1.6 2.0 Input VSWR (ANT port) 1920.0 ... 1980.0 MHz - 1.8 2.2 Output VSWR (RX port) 1920.0 ... 1980.0 MHz - 1.9 2.2 α Attenuation 1) MHz 10.0 ... 1800.0 MHz 30 35 - dB 1800.0 ... 1880.0 MHz 20 30 - dB 1880.0 ... 1900.0 MHz 8 25 - dB 2110.0 ... 2170.0 MHz 46 50 - dB 2400.0 ... 2500.0 MHz 25 28 - dB 2500.0 ... 3840.0 MHz 15 20 - dB 3840.0 ... 3960.0 MHz 25 30 - dB 3960.0 ... 5000.0 MHz 20 32 - dB 5000.0 ... 5760.0 MHz 10 20 - dB 5760.0 ... 5940.0 MHz 15 25 - dB Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 4 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characterisitcs TX - RX min. typ. @ 25 ˚C max. α Isolation 1920.0 ... 1980.0 MHz 45 48 - dB 2110.0 ... 2170.0 MHz 52 55 - dB Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage Input power at pin 1 T Tstg VDC VESD PIN 2110.0 ... 2170.0 MHz elsewhere 1) –35/+85 –40/+85 5 100 ˚C ˚C V V1) 28 dBm 10 dBm machine model, 10 pulses source and load impedance 50 Ω } LTE 5 MHz downlink (11.7 PAPR) T = 55˚C, 50.000 h acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses Please read cautions and warnings and important notes at the end of this document. 5 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Frequency Response TX-ANT Frequency Response TX-ANT Please read cautions and warnings and important notes at the end of this document. 6 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Frequency Response ANT-RX Frequency Response ANT-RX Please read cautions and warnings and important notes at the end of this document. 7 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet Frequency Response TX-RX Frequency Response TX-RX Please read cautions and warnings and important notes at the end of this document. 8 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet S11 VSWR (TX) S22 VSWR (ANT) S33 VSWR (RX) Please read cautions and warnings and important notes at the end of this document. 9 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet EVM Rx EVM Tx Please read cautions and warnings and important notes at the end of this document. 10 November 09, 2011 SAW Components B7967 SAW Duplexer 1950.0 / 2140.0 MHz Data sheet References Type B7967 Ordering code B39212B7967P810 Marking and package C61157-A3-A26 Packaging F61074-V8211-Z000 Date codes L_1126 B7967_NB.s3p S-parameters B7967_WB.s3p See file header for port/pin assignment table Soldering profile S_6001 RoHS compatible Defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 11 November 09, 2011 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 12 November 09, 2011 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: EPCOS: B39212B7967P810