FREESCALE MC12017D

Freescale Semiconductor, Inc.Order this document by MC12015/D
MC12015
MC12016
MC12017
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Dual Modulus Prescaler
MECL PLL COMPONENTS
DUAL MODULUS PRESCALER
SEMICONDUCTOR
TECHNICAL DATA
225 MHz Toggle Frequency
Low–Power 7.5 mA Maximum at 6.8 V
Control Input and Output Are Compatible With Standard CMOS
Connecting Pins 2 and 3 Allows Driving One TTL Load
Supply Voltage 4.5 V to 9.5 V
8
1
D SUFFIX
PLASTIC PACKAGE
CASE 751
(SO–8)
ORDERING INFORMATION
Device
Operating
Temperature Range
Package
TA = –40 to 85°C
SO–8
MC12015D
MC12016D
MC12017D
SIMPLIFIED BLOCK DIAGRAM
Control
Input
1
Signal
Input
Signal
GND
0.001µF
5
÷N / N+1
2 Active
Pullup
6
3
Output
1. Vreg at Pin 7 is not guaranteed to be between 4.5 and
5.5V when VCC is being applied to Pin 8
2. Pin 7 is not to be used as a source of regulated output
voltage
0.001µF
Vreg
4
7
0.1µF
VCC
8
0.1µF
GND
Voltage
Regulator
 Motorola, Inc. 1999
MOTOROLA RF/IF DEVICE DATA For More Information On This Product,
Go to: www.freescale.com
Rev 4
1
ARCHIVE INFORMATION
•
•
•
•
•
TO Vreg
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
The MC12015, MC12016 and MC12017 are dual modulus prescalers
which will drive divide by 32 and 33, 40 and 41, and 64 and 65, respectively.
An internal regulator is provided to allow these devices to be used over a
wide range of power–supply voltages. The devices may be operated by
applying a supply voltage of 5.0 Vdc ±10% at Pin 7, or by applying an
unregulated voltage source from 5.5Vdc to 9.5 Vdc to Pin 8.
Freescale
MC12015Semiconductor,
MC12016 MC12017 Inc.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
ARCHIVED
BY FREESCALE
SEMICONDUCTOR,
INC.8.0
2005
Regulated Voltage,
Pin 7
Vreg
Power Supply Voltage, Pin 8
Operating Temperature Range
Storage Temperature Range
NOTE:
Vdc
VCC
10
Vdc
TA
–40 to +85
°C
Tstg
–65 to +175
°C
ESD data available upon request.
ELECTRICAL CHARACTERISTICS (VCC = 5.5 to 9.5 V; Vreg = 4.5 to 5.5 V; TA = –40 to 85°C, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
fmax
fmin
225
–
–
–
–
35
Supply Current
ICC
–
6.0
7.8
mA
Control Input HIGH (÷32, 40 or 64)
VIH
2.0
–
–
V
Control Input LOW (÷33, 41 or 65)
VIL
–
–
0.8
V
Output Voltage HIGH (Isource = 50µA) [Nofe 1]
VOH
2.5
–
–
V
Output Voltage LOW (Isink = 2mA) [Note 1]
VOL
–
–
0.5
V
Input Voltage Sensitivity
Vin
400
200
–
–
800
800
–
–
tout to 70
MHz
35 MHz
50 to 225 MHz
PLL Response Time [Notes 2 and 3]
tPLL
mVpp
ns
NOTES: 1. Pin 2 connected to Pin 3.
2. tPLL = the period of time the PLL has from the prescaler rising output tranistion (50%) to the modulus control input edge transition
(50%) to ensure proper modulus selection.
3. tout = period of output waveform.
2
For More Information On This Product, MOTOROLA RF/IF DEVICE DATA
Go to: www.freescale.com
ARCHIVE INFORMATION
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
Toggle Frequency (Sine Wave Input)
Unit
Freescale
MC12015Semiconductor,
MC12016 MC12017 Inc.
OUTLINE DIMENSIONS
ARCHIVED BY FREESCALE SEMICONDUCTOR,
INC. 2005
D SUFFIX
PLASTIC PACKAGE
CASE 751-06
(SO–8)
ISSUE T
8
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. DIMENSIONS ARE IN MILLIMETER.
3. DIMENSION D AND E DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
5. DIMENSION B DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS
OF THE B DIMENSION AT MAXIMUM MATERIAL
CONDITION.
C
5
0.25
H
E
M
B
M
1
4
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
h
B
e
X 45 _
q
A
C
SEATING
PLANE
L
0.10
A1
B
0.25
M
C B
S
A
S
DIM
A
A1
B
C
D
E
e
H
h
L
q
MILLIMETERS
MIN
MAX
1.35
1.75
0.10
0.25
0.35
0.49
0.19
0.25
4.80
5.00
3.80
4.00
1.27 BSC
5.80
6.20
0.25
0.50
0.40
1.25
0_
7_
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
ARCHIVE INFORMATION
D
A
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141,
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan. 81–3–5487–8488
Customer Focus Center: 1–800–521–6274
Mfax: [email protected] – TOUCHTONE 1–602–244–6609
ASIA / PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
Motorola Fax Back System
– US & Canada ONLY 1–800–774–1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
– http://sps.motorola.com/mfax/
852–26668334
HOME PAGE: http://motorola.com/sps/
MOTOROLA RF/IF DEVICE DATA◊For More Information On This Product,
Go to: www.freescale.com
MC12015/D
3