Rocker Switches 31.5 x 17 mm SP illuminated Rocker Switches RK10 Series 31.50 31.50 2 3 1 2 1 17.00 17.00 CIRCUIT LIGHTED T1-NEON-T3 3 2 CIRCUIT CIRCUIT LIGHTED T2-NEON-T3 10.50 9.50 6.35 RK10_Q63AUAC_E 9.50 22.30 22.30 10.50 RK10_Q60CNAA0A Rocker Switches 1 6.35 31.50 31.50 1 2 CIRCUIT 2 CIRCUIT 17.00 17.00 1 10.50 9.50 13.00 22.30 22.30 10.50 6.35 RK10_Q60AUAC_A 9.5 TERMINAL Q6 Ø3.0 RK10_WR0ANAA0A ACTUATOR MARKING 9.05 BASE MARKING PANEL SIZE PANEL CUT-OUT Snap-in mounting Y 6.3mm TAB, 0.8mm THICK (LONG) A E E Elongate Hole D WR Wire Barrier of Base C I OFF ON How to order: RK10 2 ON Z A 1 ON EH B OFF Ø3.0 F HI T3 B LO Ø3.0 T2 6.3mm TAB, 0.8mm THICK (SHORT) ON T1 OFF Q7 Z R X (Panal thickness) Dimension Y Dimension Z 0.75 to 1.25 mm 28.6 +0/-0.1 mm 13.60 +0.1/-0 mm 1.25 to 2 mm 28.8 +0/-0.1 mm 13.60 +0.1/-0 mm 2 to 3 mm 29.2 +0/-0.1 mm 13.60 +0.1/-0 mm General Specifications: 3 4 5 6 7 8 9 FEATURES » Single pole Rocker switch up to 15A 125VAC » Curve actuator 1 S1 S2 POLES & SWITCHING: Single Pole ON-OFF Single Pole ON-ON 6 TERMINAL (See above drawings): Q6 6.3mm TAB, 0.8mm THICK, LONG Q7 6.3mm TAB, 0.8mm THICK, SHORT EH Elongate Hole WR Wire 2 3 0 2 3 4 A 5 N U TERMINAL BENDING: No Bending Bend Terminals 1 & 2 Bend Terminals 1 & 3 ACTUATOR MARKING (See above drawings): B C D E F ILLUMINATION: No Illuminated Illuminated [email protected] A H B 7 A H B C F D 8 I 0 1 2 9 R BASE COLOR: Black Grey White ACTUATOR COLOR: Black Grey White Red Green Orange NEON LAMP POSITION: None Lighted Lighted T1-NEON-T3 Lighted T2-NEON-T3 BASE MARKING (See above drawings): A E B Z » Illuminated or non-illuminated MATERIALS » Contact: Silver alloy » Terminals: Silver or tin plated copper » Lamp: Neon » Spring: Piano wire MECHANICAL » Temperature Range: -20°C to +85°C ELECTRICAL » Electrical Life: 6,000 cycles » Rating: 10A250VAC 15A125VAC » Initial Contact Resistance: 20mΩ max. » Insulation Resistance: 100MΩ min. at 500VDC www.greatecs.com B10