SB5200 SCHOTTKY BARRIER RECTIFIER VOLTAGE: 200V CURRENT: 5.0A FEATURE DO-201AD High current capability, Low forward voltage drop Low power loss, high efficiency High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL SB5200 units Maximum Recurrent Peak Reverse Voltage Vrrm 200 V Maximum RMS Voltage Vrms 140 V Maximum DC blocking Voltage Vdc 200 V Maximum Average Forward Rectified Current 3/8" lead length Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load If(av) 5.0 A Ifsm 150.0 A (Note 1) Vf 0.90 V Ta =25°C Ta =100°C Ir 0.5 10 mA Rth(ja) 10.0 °C /W Tstg,Tj -50 to +150 °C Maximum Forward Voltage at 5.0A Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance (Note 2) Storage and Operating Junction Temperature Note: 1. Pulse test: 300µs pulse width, 1% duty cycle 2. Thermal Resistance from Junction to Ambient at 0.5" lead length, vertical P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SB5200 Rev.A1 www.gulfsemi.com