SB370 THRU SB3100 SCHOTTKY BARRIER RECTIFIER VOLTAGE: 70 TO 100V CURRENT: 3.0A FEATURE DO-201AD High current capability, Low forward voltage drop Low power loss, high efficiency High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8" lead length Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at 3.0A DC Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =100°C Typical Junction Capacitance Typical Thermal Resistance Storage Temperature Range Operating Temperature Range (Note 1) (Note 2) Vrrm Vrms Vdc SB 370 70 49 70 SB 380 80 56 80 SB 390 90 63 90 SB 3100 100 70 100 units V V V If(av) 3.0 A Ifsm 80.0 A Vf 0.79 V Ir 500 20.0 uA mA Cj R(ja) Tstg Tj 90 25.0 -55 to +150 -55 to +125 pF °C /W °C °C Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.5" lead length, vertical P.C. Board Mounted 1 1 Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SB370 THRU SB3100 2 2 Rev.A5 www.gulfsemi.com