HITTITE HMC913LC4B

HMC913LC4B
v02.1010
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.6 - 20 GHz
Typical Applications
Features
The HMC913LC4B is ideal for:
• EW, ELINT & IFM Receivers
High Logging Range: 59 dB
(-54 to +5 dBm) @ 18 GHz
• DF Radar Systems
Output Frequency Flatness: ±2 dB
• ECM Systems
Log Linearity: ±1 dB
• Broadband Test & Measurement
Fast Rise/Fall Times: 5/10 ns
• Power Measurement & Control Circuits
Single Positive Supply: +3.3V
• Military & Space Applications
ESD Sensitivity (HBM): Class 1A
24 Lead 4x4mm SMT Package: 16mm2
Functional Diagram
General Description
The HMC913LC4B is a Successive Detection Log
Video Amplifier (SDLVA) which operates from 0.6 to
20 GHz. The HMC913LC4B provides a logging range
of 59 dB. This device offers typical fast rise/fall times
of 5/10 ns and a superior delay time of only 14 ns.
The HMC913LC4B log video output slope is typically
14 mV/dB. Maximum recovery times are less than
30 ns. The HMC913LC4B is available in a highly compact 4x4 mm SMT ceramic package and is ideal for
high speed channelized receiver applications.
SDLVAs - SMT
11
Electrical Specifications, TA = +25 °C Vcc1 = Vcc2 = +3.3V
Parameter
Conditions
Typ.
Units
0.6 - 20
GHz
Pin = -25 dBm
±2
dB
Pin = -50 to +3 dBm
±1
dB
Input Frequency Range [1]
Frequency Flatness
Log Linearity
Log Linearity over Temperature
Pin = -25 dBm
±1
dB
Minimum Logging Range
to ±3 dB error @ 18 GHz
-54 @ 18 GHz
dBm
Maximum Logging Range
to ±3 dB error @ 18 GHz
+5 @ 18 GHz
dBm
7
dB
Input Return Loss
Log Video Minimum Output Voltage
1
V
Log Video Maximum Output Voltage
1.8
V
ns
Log Video Output Rise Time
10% to 90%
5
Log Video Output Fall Time
90% to 10%
10
ns
25
ns
Log Video Recovery Time
Log Video Output Slope
Log Video Output Slope Variation over Temperature
@ 10 GHz
14
mV/dB
5
µV/dB°C
Log Video Propagation Delay
14
ns
Supply Current (Icc1)
80
mA
8
mA
Supply Current (Icc2)
@ Pin = -30 dBm
[1] Electrical specs and performance plots are given for single-ended operation
11 - 1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC913LC4B
v02.1010
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.6 - 20 GHz
Error Flatness vs.
Input Power Over Frequency [1][2]
VIDEO OUT & Error
vs. Input Power, Fin = 500 MHz [1]
6
2
3.2
1.8
4
ERR +25C
ERR +85C
ERR -40C
VIDEO OUT (V)
0
-2
1.6
1.4
0.8
1.2
0
1
-0.8
0.8
1 GHz
2 GHz
6 GHz
10 GHz
-6
-70
-60
-50
-40
-30
-20
14 GHz
18 GHz
20 GHz
-10
0
10
0.4
-70
20
-60
-50
ERR +25C
ERR +85C
ERR -40C
2
2.4
1.8
1.6
1.6
0.8
1.2
0
-2.4
0.6
-3.2
0.4
-70
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
-20
-10
0
10
20
3.2
ERR +25C
ERR +85C
ERR -40C
-60
-50
1.8
1.6
1.6
0
1
-0.8
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
-60
-50
-40
-30
-20
-10
-40
-30
-20
-10
0
10
-2.4
20
-3.2
0
10
20
2.4
1.6
1.4
0.8
1.2
0
1
-1.6
0.8
-2.4
0.6
-3.2
0.4
-70
INPUT POWER (dBm)
3.2
ERR +25C
ERR +85C
ERR -40C
-0.8
-1.6
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
-60
-50
-40
-30
-20
-10
0
10
ERROR (dB)
VIDEO OUT (V)
2.4
0.8
1.2
0.4
-70
2
ERROR (dB)
1.4
3.2
VIDEO OUT (V)
ERR +25C
ERR +85C
ERR -40C
0.6
-1.6
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT & Error
vs. Input Power, Fin = 10 GHz [1]
2
0.8
1.6
INPUT POWER (dBm)
VIDEO OUT & Error
vs. Input Power, Fin = 6 GHz [1]
1.6
2.4
-0.8
INPUT POWER (dBm)
1.8
11
-3.2
0
0.8
-30
20
1
-1.6
-40
10
1.2
-0.8
-50
0
0.8
0.8
-60
-10
1.4
1
0.4
-70
-20
ERROR (dB)
1.4
ERROR (dB)
VIDEO OUT (V)
3.2
VIDEO OUT (V)
2
0.6
-30
VIDEO OUT & Error
vs. Input Power, Fin = 2 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 1 GHz [1]
1.6
-40
-2.4
INPUT POWER (dBm)
INPUT POWER (dBm)
1.8
-1.6
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
0.6
SDLVAs - SMT
-4
ERROR (dB)
ERROR (dB)
1.6
2
2.4
-2.4
20
-3.2
INPUT POWER (dBm)
[1] Electrical Specs and performance plots are given for single-ended operation
[2] An average ideal line is used to calculate error curves.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
11 - 2
HMC913LC4B
v02.1010
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.6 - 20 GHz
VIDEO OUT & Error
vs. Input Power, Fin = 14 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 18 GHz [1]
1.8
ERR +25C
ERR +85C
ERR -40C
1.8
1.6
1.6
0.8
1.2
0
1
-0.8
0.8
11
2.4
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
0.6
0.4
-70
-60
-50
-40
-30
-20
-10
0
10
20
3.2
ERR +25C
ERR +85C
ERR -40C
0.8
1.2
0
1
-0.8
-1.6
0.8
-2.4
0.6
-3.2
0.4
-70
-60
-50
-40
2.4
1.6
1.6
0.8
1.2
0
VIDEO OUT (V)
2
1.8
1.4
0.6
-3.2
0.4
-70
-10
0
10
20
1.6
0
-2.4
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
2.4
1
-0.8
-1.6
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
-60
-50
-40
-30
-20
-10
0
10
-2.4
20
-3.2
INPUT POWER (dBm)
INPUT POWER (dBm)
VIDEO OUT vs. Frequency
Over Input Power & Temperature [1]
VIDEO OUT vs. Frequency
Over Input Power & Bias Voltage [1]
1.8
1.8
+25C
+85C
-40C
1.7
-10 dBm
-25 dBm
1.3
1.2
-10 dBm
1.6
1.5
1.4
3.15V
3.30V
3.45V
1.7
VIDEO OUT (V)
1.6
VIDEO OUT (V)
-3.2
1.2
0.8
-20
20
0.8
-1.6
-30
10
1.4
-0.8
-40
0
ERR +25C
ERR +85C
ERR -40C
0.8
-50
-10
3.2
1
-60
-20
1.5
-25 dBm
1.4
1.3
1.2
-40 dBm
1.1
-40 dBm
1.1
1
1
0
2
4
6
8
10
12
14
16
18
20
22
FREQUENCY (GHz)
0
2
4
6
8
10
12
14
16
18
20
22
FREQUENCY (GHz)
[1] Electrical Specs and performance plots are given for single-ended operation
11 - 3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
ERROR (dB)
VIDEO OUT (V)
3.2
ERROR (dB)
SDLVAs - SMT
ERR +25C
ERR +85C
ERR -40C
0.4
-70
-30
-2.4
VIDEO OUT & Error
vs. Input Power, Fin = 26 GHz [1]
2
0.6
-1.6
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
INPUT POWER (dBm)
VIDEO OUT & Error
vs. Input Power, Fin = 20 GHz [1]
1.6
1.6
1.4
INPUT POWER (dBm)
1.8
2.4
ERROR (dB)
1.4
2
ERROR (dB)
VIDEO OUT (V)
1.6
3.2
VIDEO OUT (V)
2
HMC913LC4B
v02.1010
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.6 - 20 GHz
Rise Time for Various Frequencies
@ 0 dBm [1]
Fall Time for Various Frequencies
@ 0 dBm [1]
1.8
1.8
2 GHz
10 GHz
18 GHz
1.6
VIDEO OUT (V)
VIDEO OUT (V)
1.6
1.4
1.2
2 GHz
10 GHz
18 GHz
1.4
1.2
1
1
0.8
0.8
0
20
40
60
80
100
0
20
40
60
TIME (ns)
80
100
Input Return Loss vs. Frequency [1]
0
-5
RETURN LOSS (dB)
11
SDLVAs - SMT
TIME (ns)
-10
-15
+25C
+85C
-40C
-20
-25
-30
0
4
8
12
16
20
24
28
FREQUENCY (GHz)
Absolute Maximum Ratings
Vcc
+3.6V
Enable
+3.6V
RF Input Power
+15 dBm
Junction Temperature
125 °C
Continuous Pdiss (T=85 °C)
Derate 12.63 mW/°C above 85 °C
0.51 W
Thermal Resistance (Rth)
(junction to package bottom)
79.2 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
[1] Electrical Specs and performance plots are given for single-ended operation
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
11 - 4
HMC913LC4B
v02.1010
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.6 - 20 GHz
Outline Drawing
SDLVAs - SMT
11
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD
OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Pin Descriptions
Pin Number
11 - 5
Function
Description
1 - 3, 6, 7, 10 - 13,
16, 18 - 20, 24
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
4, 5
RFINP, RFINN
RF Input pins Connect RF to RFINP and AC
couple RFINN to ground via 50 Ohm for single
ended operation
8, 9
GND
These pins and the exposed package bottom must be
connected to a high quality RF/DC ground.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC913LC4B
v02.1010
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.6 - 20 GHz
Pin Descriptions
Pin Number
Function
Description
14, 15
VIDEO FB,
VIDEO OUT
Video out and feedback.
Interface Schematic
17
EN
Enable pin connected to Vcc1 or Vcc2 for normal
operation. Total supply current reduced to less
than 3mA when EN is set to 0V.
21
Vcc2
Bias Supply. Connect supply voltage to
these pins with appropriate filtering. Connect Vcc2
with Vcc1. See application circuit.
22, 23
Vcc1
Bias Supply. Connect Supply Voltage to
these pins with appropriate filtering. Connect Vcc2
with Vcc1. See application circuit.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
SDLVAs - SMT
11
11 - 6
HMC913LC4B
v02.1010
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.6 - 20 GHz
Application Circuit
SDLVAs - SMT
11
Note: Connect Vcc2 and Vcc1 together for Nominal operation.
11 - 7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC913LC4B
v02.1010
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.6 - 20 GHz
Evaluation PCB
SDLVAs - SMT
11
List of Materials for Evaluation PCB 120257 [1]
Item
Description
J1
K-Type Connector
J2
SMA Connector
J3 - J5
DC Pins
C1, C2
33 pF Capacitor, 0201 Pkg.
C3, C4
10k pF Capacitor, 0402 Pkg.
C5
47 pF Capacitor, 0402 Pkg.
C6, C7
4.7 µF Capacitor, CASE A Pkg.
R2, R3, R5
0 Ohm Resistor, 0402 Pkg.
R7
0 Ohm Resistor, 0201 Pkg.
R8
49.9 Ohm Resistor, 0201 Pkg.
U1
HMC913LC4B SDLVA
PCB [2]
120255 Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
11 - 8