HOA1872 Transmissive Sensor FEATURES • Choice of phototransistor or photodarlington output • Three sensitivity ranges • Choice of metal can package or plastic molded components • 0.100 in.(2.54 mm) slot width INFRA-14.TIF Housing material is polyester. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. OUTLINE DIMENSIONS in inches (mm) Tolerance 3 plc decimals ±0.010(0.25) 2 plc decimals ±0.020(0.51) .250(6.36) .125(3.18) .425(10.80) OPTICALC L .350(8.89) ~ ~ + S .100(2.54) .300(7.62) EC KA ~ ~ .500(12.70) + E DESCRIPTION The HOA1872 series consists of an infrared emitting diode facing an NPN silicon phototransistor (HOA1872- 001, - 002, - 011, - 012) or photodarlington (HOA1872- 003, - 013) encased in a black thermoplastic housing. Detector switching takes place wherever an opaque object passes through the slot between emitter and detector. The HOA1872- 001, - 002 and - 003 have a 0.050 in.(1.27 mm)dia. detector aperture and employ metal can packaged components, while the HOA1872- 011, - 012, and - 013 have a 0.060 in.(1.52 mm) dia. detector aperture and contain plastic molded components. For additional component information see SE1450, SD1440, SD1410, SEP8506, SDP8406, and SDP8106. .200(5.10) .175(4.45) .300(7.62) MIN. .050(1.27) .020(0.51) DIA FOR -001 THRU -003 .020(0.51) SQ FOR -011 THRU -013 .100(2.54) DIM_044.ds4 286 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HOA1872 Transmissive Sensor ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS IR EMITTER DETECTOR COUPLED CHARACTERISTICS ABSOLUTE MAXIMUM RATINGS ABSOLUTE MAXIMUM RATINGS (continued) (25¡C Free-Air Temperature unless otherwise noted) Operating Temperature Range HOA1872-001, -002, -003 HOA1872-011, -012, -013 Storage Temperature Range HOA1872-001, -002, -003 HOA1872-011, -012, -013 Soldering Temperature HOA1872-001, -002, -003 HOA1872-011, -012, -013 IR EMITTER Power Dissipation HOA1872-001, -002, -003 HOA1872-011, -012, -013 Reverse Voltage Honeywell reserves the right to make changes in order to improve design and supply the best products possible. -55¡C to 100¡C -40¡C to 85¡C -55¡C to 125¡C -40¡C to 85¡C 260¡C (10 sec.) 240¡C (5 sec.) 75 mW 100 mW 3V Continuous Forward Current DETECTOR Collector-Emitter Voltage Emitter-Collector Voltage Power Dissipation HOA1872-001, -002, -003 HOA1872-011, -012, -013 Collector DC Current 50 mA TRANS. 30 V 5V DARLINGTON 15 V 5V 75 mW [À] 75 mW [À] 100 mW [Á] 100 mW [Á] 30 mA 30 mA Notes 1. Derate linearly at 0.71 mW/¡C above 25¡C. 2. Derate linearly at 0.78 mW/¡C above 25¡C. h 287 HOA1872 Transmissive Sensor SCHEMATIC Fig. 1 IRED Forward Bias Characteristics gra_092.ds4 Forward current - mA sch_027.cdr 100 90 80 70 60 50 40 30 20 10 0 Pulsed condition TA = 80 °C TA = 25 °C TA = -40 °C 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Forward voltage - V Fig. 2 Fig. 3 Non-Saturated Switching Time vs Load Resistance gra_096.ds4 Dark Current vs Temperature gra_301.cdr Response time - µs 1000 100 Photodarlington 10 Phototransistor 1 10 100 1000 10000 Load resistance - Ohms Fig. 4 Collector Current vs Ambient Temperature gra_095.ds4 Normalized collector current 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 100 Free-air temperature - °C All Performance Curves Show Typical Values 288 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HOA1872 Transmissive Sensor Honeywell reserves the right to make changes in order to improve design and supply the best products possible. h 289