MCC
1N4614
THRU
1N4125
omponents
20736 Marilla Street Chatsworth
!"#
$
% !"#
TM
Micro Commercial Components
Features
•
•
•
•
•
Zener Voltage Range = 1.8V to 47V
Double Slug Type Construction
Metallurgical Bonded Construction
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Moisture Sensitivity: Level 1
500mW Silicon
Zener Diodes
Mechanical Data
•
•
DO-35
Case: Double slug type, hermetically sealed glass
Marking : Cathode band and type number
D
Maximum Ratings
Max. Steady State Power
Dissipation at
TL<75OC, Lead Length=3/8”
Junction Temperature
Storage Temperature Range
Thermal Resistance, Junction
to lead @3/8" lead length
from body
Symbol
Value
Units
PD
500
mW
TJ
TSTG
175
-55 to 175
A
Cathode
Mark
o
C
C
B
o
D
RthJL
o
C/W
250
C
Electrical Characteristics @ 25°C Unless Otherwise Specified
Max. Forward Voltage
@ I F=200mA
Note:
Symbol
Maximum
Unit
VF
1.1
V
DIMENSIONS
1. Lead in Glass Exemption Applied, see EU Directive Annex 5.
Revision: A
DIM
A
B
C
D
INCHES
MIN
------1.000
www.mccsemi.com
1 of 5
MAX
.166
.079
.020
---
MM
MIN
------25.40
MAX
4.2
2.00
.52
---
NOTE
2011/01/01
MCC
1N4614 thru 1N4125
TM
Micro Commercial Components
ELECTRICAL CHARACTERISTICS (TA = 25ºC unless otherwise noted, VF = 1.1 V Max @ IF = 200mA for all types)
(3)
Zener Voltage (2)
Device (1)
Device
Marking
Maximum Reverse Leakage Current (4) Zener Impedance (5)
Zener (IZM)
IR@VR
ZZT@IZT
Current
VZ (Volts) @IZT=250UA
Min
Nom
1N4615-
1.71
1.90
1.8
2.0
1.89
2.10
1N4616
1N4616-----
2.09
2.2
2.31
1N4617
1N4617-
2.28
1N4618
1N4618---
2.4
2.7
2.52
2.835
2.85
3.135
3.42
3.0
3.15
3.3
3.465
95
90
87
85
3.6
3.78
83
3.705
4.085
3.9
4.3
4.095
80
4.515
4.7
5.1
4.935
5.355
77
75
70
5.6
6.2
5.88
6.51
65
61
6.8
7.14
7.875
8.61
56
1N4614
1N4614
1N4615
2.565
1N4619
1N4619
--
1N4620
1N4620
--
1N4621
1N4621-
1N4622
1N4622--
1N4623
1N4623--
1N4624
1N4624---
1N4625
1N4626
1N46251N4626------
4.465
4.845
5.32
1N4627
1N4627--
5.89
1N4099
1N4099
1N4100
1N4100
1N4101
1N4101
1N4102
1N4102
1N4103
1N4104
1N4105
1N4106
1N4107
1N4108
1N4109
1N4110
1N4111
1N4112
1N4113
1N4114
1N4115
1N4116
1N4117
1N4118
1N4119
1N4120
1N4121
1N4122
1N4123
1N4124
1N4125
1N4103
1N41041N4105
1N4106
1N4107
1N4108
1N4109
1N4110
1N4111
1N4112
1N4113
1N4114
1N4115
1N4116
1N4117
1N4118
1N4119
1N4120
1N4121
1N4122
1N4123
1N4124
1N4125
-----
6.46
7.125
7.79
8.265
8.645
9.5
10.45
11.4
12.35
13.3
14.25
15.2
16.15
17.1
18.05
19
20.9
22.8
23.75
25.65
26.6
28.5
31.35
34.2
37.05
40.85
44.65
7.5
8.2
8.7
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
25
27
28
30
33
36
39
43
47
Max
mA
120
110
100
51
46
9.135
44
42
9.555
38
35
32
29
27
25
24
22
21
20
19
17
16
1
15
14
1
14
13
12
11
9.8
8.9
8.1
10.5
11.55
12.6
13.65
14.7
15.75
16.8
17.85
18.9
19.95
21
23.1
25.2
26.25
28.35
29.4
31.5
34.65
37.8
40.95
45.15
49.35
uA( Max) Volts
ohm(Max)
7.5
5.0
4.0
2.0
1
1
1400
1.0
0.8
1
1500
1600
7.5
7.5
1
1
1
1.5
2
1200
1250
1300
1650
1700
5.0
4.0
2
2
10.0
10.0
10.0
3
1600
1550
3
1500
4
1400
10.0
10.0
10.0
1.0
5
5.17
1200
200
5.70
6.24
6.61
200
1.0
1.0
1.0
.05
.05
.05
.05
.05
.05
.05
.05
.05
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
1650
200
200
6.92
200
7.60
8.44
8.12
9.857
10.65
11.40
12.15
12.92
13.67
14.44
15.20
16.72
18.25
19.00
20.45
21.28
22.80
25.08
27.38
29.65
32.65
35.75
200
200
200
200
200
100
100
100
100
150
150
150
150
150
150
200
200
200
200
200
250
250
NOTES: 1. TOLERANCE AND TYPE NUMBER DESIGNATION (VZ)
The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%.
2. ZENER VOLTAGE (VZ) MEASUREMENT Nominal zener voltage is measured with the device junction in the thermal equilibrium
. the lead temperature (TL) at 30°C ±1°C and 3/8” lead length.
at
3. MAXIMUM ZENER CURRENT RATINGS (IZM) This data was calculated using nominal voltages. The maximum handing current
capability on a worst case basis is limited by the actual zener voltage at the opertation piont and the power derating curve.
.
4.Reverse
Leakage Current(IR)reverse leakage current are guaranteed and measured at VR shown on the table .
5. Zener Impedance(ZZT) Derivation The Zener impedance is derived from the 60 cycle ac voltage.which results when an Ac
.
current
having an rms value to 10% of the DC zener current (IZT) is superimposed on IZT.
Revision: A
www.mccsemi.com
2 of 5
2011/01/01
MCC
1N4614 thru 1N4125
TM
θ VZ ,
TEMPERA TURE COEFFICIENT (mV/ °C)
Micro Commercial Components
+12
+10
+8
+6
+4
+2
RANGE
VZ @ IZT
(NOTE 2)
0
-2
-4
2
4
3
5
7
6
8
9
10
11
12
V Z , ZENER VOLTAGE (VOLTS)
Figure 1. Range for Units to 12 Volts
TEMPERATURE COEFFICIENT (mV/°C)
+6
VZ @ IZ
TA= 25 °C
+4
+2
20mA
0
0.01mA
1mA
θ VZ ,
-2
NOTE: BELOW 3 VOLTS AND ABOVE 8 VOL TS
NOTE: CHANGES IN ZENER CURRENT DO NOT
NOTE: AFFECT TEMPERATURE COEFFICIENTS
-4
3
6
5
4
8
7
V Z , ZENER VOL TAGE (VOLTS)
Figure 2. Effect of Zener Current
1000
TA = 25 ° C
500
0V BIAS
C, CAP ACIT ANCE (pF)
200
100
1V BIAS
50
20
10
50% OF
V Z BIAS
5
2
1
1
2
5
10
20
50
100
V Z, ZENER VOLTAGE (VOLTS)
Figure 3. Typical Capacitance 2.4-100 Volts
Revision: A
www.mccsemi.com
3 of 5
2011/01/01
MCC
1N4614 thru 1N4125
TM
Micro Commercial Components
Ppk , PEAK SURGE POWER (WATTS)
100
70
50
RECT ANGULAR
WAVEFORM
T J = 25°C PRIOR TO
INITIAL PULSE
11V-91V NONREPETITIVE
30
5% DUTY CYCLE
1.8V-10V NONREPETITIVE
20
10
10% DUTY CYCLE
7
5
20% DUTY CYCLE
3
2
1
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
100
200
500
1000
PW, PULSE WIDTH (ms)
Figure 4. Maximum Surge Power 1.8-91 Volts
1000
Z Z , DYNAMIC IMPEDANCE (OHMS)
500
T J = 25°C
iZ (rms) = 0.1 Iz(dc)
VZ = 2.7V
f = 60 Hz
200
47V
100
27V
50
20
6.2V
10
5
2
1
0.1
0.2
0.5
1
2
5
10
20
50
100
IZ , ZENER CURRENT (mA)
Figure 5. Effect of Zener Current on
Zener Impedance
TJ = 25°C
1000
MAXIMUM
iZ (rms) = 0.1 IZ (dc)
500
f = 60Hz
IZ = 1mA
I F , FOR WARD CURRENT (mA)
Z Z , DYNAMIC IMPEDANCE (OHMS)
1000
700
500
200
100
70
50
5mA
20
20mA
10
7
5
2
MINIMUM
200
100
50
75 °C
20
10
25 °C
5 150 °C
0 °C
2
1
1
1
2
3
5
7
10
20
30
50
70 100
0.4
V Z , ZENER VOLTAGE (VOLTS)
0.6
0.7
0.8
0.9
1
1.1
V F , FOR WARD VOLTAGE (VOLTS)
Figure 6. Effect of Zener Voltage on Zener Impedance
Revision: A
0.5
Figure 7. Typical Forward Characteristics
www.mccsemi.com
4 of 5
2011/01/01
MCC
TM
Micro Commercial Components
Ordering Information :
Part Number-TP
Tape&Reel: 10Kpcs/Reel
Part Number-AP
Ammo Packing: 5Kpcs/Ammo Box
Part Number-BP
Bulk: 100Kpcs/Carton
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
www.mccsemi.com
Revision: A
5 of 5
2011/01/01