MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# MLESD24B-0603 Features • • • • • • • • • ESD protection for high speed data lines to IEC61000-4-2 ESD contact discharge 8KV, max 15KV IEC61000-4-2 ESD air discharge 15KV, max 25KV Multilayer structure Surface mount Extremely low capacitance Very low leakage current Fast response time Bi-directional ESD protection Lead free solder termination The best ESD protection for high frequency, low voltage applications Multilayer Polymer ESD Suppressor 0603 Application • • • • • • • High Definition Multi-Media Interface (HDMI) Digital Visual Interface (DVI) Display Port Interface Unified Display Interface (UDI) MDDI Ports Gigabit Ethernet USB2.0 and IEEE1394 interface Suggested Solder Pad Layout G * Caution: This component is designed for signal line protection only, not intended to be used under bias, not for application with a power line. E Environmental Specifications • • • • • Operation temperature: -40~90ć Moisture Resistance, Steady state: MIL-STD-833,Method 1004.7, 85% RH,85ć,1000hrs Thermal Shock: MIL-STD-202,Method 107G,-55ć to150ć,30 min cycle,10 cycles. Vibration: MIL-STD-202F, Method 201A, (10 to 55 to 10HZ, 1 min. cycle, 2hrs each in X-Y-Z) Chemical Resistance: ASTM D-543, 4hrs @40ć, 3 solutions(H2O, detergent solution, deluxer ) • Solder leach resistance and terminal adhesion: Per EIA-576 test Revision:2 F DIMENSIONS DIM A B C D E F G INCHES MIN MAX .059 .067 .027 .036 .013 . 017 . 018 . 015 . 035 . 040 . 023 . 028 . 051 . 056 www.mccsemi.com 1 of 4 MM MIN 1.50 0.70 0.33 0.40 0.90 0.60 1.30 MAX 1.70 0.90 0.43 0.45 1.00 0.70 1.40 NOTE 2009/04/08 MCC MLESD24B-0603 Micro Commercial Components Electrical Characteristics Electrical Characteristics Parameter Symbol Conditions Min Typ Max Units Continuous operating voltage VDC --- --- --- 24 V Trigger voltage VT IEC61000-4-2 8KV contact discharge --- 500 --- V Clamping voltage VC EC61000-4-2 8KV contact discharge --- 36 --- V Leakage current IL 24V VDC --- 0.20 10 nA Capacitance CP VR = 0V, f = 1MHz --- 0.15 0.3 pF Operating Temperature --- --- -40 --- 90 ć Storage Temperature --- --- -55 --- 150 ć ESD pulse withstand Pulses EC61000-4-2 8KV contact discharge 2000 --- --- --- Notes: 1, Trigger and clamping voltage measure per IEC 61000-4-2, 8KV direct discharge method Typical MLESD clamping for +8KV pulse per IEC61000-4-2 Revision:2 www.mccsemi.com 2 of 4 2009/04/08 TM MCC MLESD24B-0603 Micro Commercial Components Design Recommendations for USB2.0 For USB2.0 port MLESD24B-0603 Design Recommendations for Antenna For antenna line MLESD24B-0603 Revision:2 www.mccsemi.com 3 of 4 2009/04/08 TM MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-TP Tape&Reel;5Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. Revision:2 www.mccsemi.com 4 of 4 2009/04/08 3