MCC
TM
Micro Commercial Components
SF61
THRU
SF66
omponents
20736 Marilla Chatsworth
!"#
$
% !"#
Features
•
•
•
x
x
x
x
Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates
RoHS Compliant. See ordering information)
Epoxy meets UL 94 V-0 flammability rating
Moisture Sensitivity Level 1
High reliability
High current capability
Low forward voltage drop
High surge current capability
6.0 Amp Super Fast
Rectifier
50 to 400 Volts
DO-201AD
Maximum Ratings
x
x
x
Operating Temperature: -65к to +125к
Storage Temperature: -65к to +150к
For capacitive load, derate current by 20%
Maximum
Maximum
Recurrent
MCC
RMS
Peak Reverse
Part Number
Voltage
Voltage
SF61
50
35
SF62
100
70
SF63
150
105
SF64
200
140
SF65
300
210
SF66
400
280
Maximum DC
Blocking
Voltage
D
50
100
150
200
300
400
A
Cathode
Mark
B
Electrical Characteristics @ 25qC Unless Otherwise Specified
Average Forward
Current
Peak Forward Surge
Current
Maximum
Instantaneous
Forward Voltage
SF61-SF64
SF65-SF66
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
Typical Junction
Capacitance
SF61-SF64
SF65-SF66
Maximum Reverse
Recovery Time
IF(AV)
6.0A
TC = 55к
IFSM
150A
8.3ms, half sine
VF
0.975V
1.3V
IFM = 6.0A;
TC = 25к
5.0uA
50uA
TC = 25к
TC = 100к
D
C
DIMENSIONS
IR
CJ
TRR
120pF
60pF
35nS
Measured at
1.0MHz, VR=4.0V
DIM
A
B
C
D
INCHES
MIN
MAX
--.370
--.250
.048
.052
1.000
---
MM
MIN
----1.20
25.40
MAX
9.50
6.40
1.30
---
NOTE
IF=0.5A, IR=1.0A,
IRR=0.25A
Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex Notes 7.
2. Pulse Test: Pulse width 300 usec, Duty cycle 1%.
Revision: A
www.mccsemi.com
1 of 4
2011/01/01
MCC
SF61 thru SF66
TM
Micro Commercial Components
Figure1
Reverse Recovery Time Characteristic And Test Circuit Diagram
50:
10:
trr
+0.5A
0
Pulse
Generator
Note 2
50Vdc
1:
-0.25
Oscilloscope
Note 1
-1.0
1cm
Set Time Base for 20/100ns/cm
Notes:
1. Rise Time = 7ns max.
Input impedance = 1 megohm, 22pF
2. Rise Time = 10ns max.
Source impedance = 50 ohms
3. Resistors are non-inductive
Figure 3
Typical Reverse Characteristics
Figure 2
Forward Derating Curve
60
100
Single Phase, Half Wave
60Hz Resistive or
Inductive Load
50
40
TJ=100qC
10
30
Amps
20
10
0
µAmps 1.0
TJ=25qC
150
25
50
100
75
0
125
Average Forward Rectified Current Per Leg - Amperes versus
Ambient Temperature - qC
0.1
.01
0
20
40
60
80
100
140
Volts
Instantaneous Reverse Leakage Current -MicroAmperes versus
Percent Of Rated Peak Reverse Voltage - Volts
Revision: A
www.mccsemi.com
2 of 4
2011/01/01
MCC
SF61 thru SF66
TM
Micro Commercial Components
Figure 4
Typical Forward Characteristics
Figure 5
Peak Forward Surge Current
150
100
125
8.3ms Single Hale
Sine Wave
JEDEC METHED
100
75
10
Amps
50
25
0
SF61-SF64
1
2
4
6 8 10
20
40
60 80 100
Cycles
Amps 1.0
Peak Forward Surge Current - Amperes versus
Number Of Cycles At 60Hz - Cycles
SF65-SF66
.1
TJ=25к
Pulse Width=300µs
1% Duty Cycle
.01
0
0.4
0.2
0.6
10
0.8
1.4
Volts
Instantaneous Forward Current - Amperes versus
Forward Voltage - Volts
Figure 6
Typical Junction Capacitance
180
160
140
pF
SF61-SF64
120
TJ=25к
100
SF65-SF66
80
60
.1
.5
1
2
5
10
20
50
100
200
Volts
Junction Capacitance – pF
Reverse Voltage - Volts
Revision: A
www.mccsemi.com
3 of 4
2011/01/01
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 1.2Kpcs/Reel
Part Number-AP
Ammo Packing: 1.2Kpcs/Ammo Box
Part Number-BP
Bulk: 12Kpcs/Carton
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Revision: A
www.mccsemi.com
4 of 4
2011/01/01
3