APC-16 16W Single Output Switching Power Supply series Features : Constant current mode design Universal AC input / Full range Protections:Short circuit / Over current / Over voltage Fully isolated plastic case Small and compact size Cooling by free air convection Pass LPS Suitable for LED lighting and moving sign applications 100% full load burn-in test Low cost / High reliability 2 years warranty F SPECIFICATION MODEL APC-16-350 APC-16-700 RATED CURRENT 350mA 700mA DC VOLTAGE RANGE RATED POWER 12~48V 16.8W 9~24V 16.8W RIPPLE & NOISE (max.) Note.2 300mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 CURRENT ACCURACY 5.0% 5.0% LINE REGULATION 1.0% INPUT 3000ms, 200ms / 230VAC HOLD UP TIME (Typ.) 20ms/230VAC Note.4 90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz EFFICIENCY(Typ.) 84% AC CURRENT INRUSH CURRENT(max.) 0.3A/230VAC;0.5A/115VAC Cold start 35A/115VAC,70A/230VAC 83% 0.25mA / 240VAC 50.4~ 60V Protection type : Shut off o/p voltage, clamping by zener diode -30 ~ 70 20 ~ 90% RH non-condensing VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE -40 ~ +80 0.2%/ 27.6~ 33.5V (Refer to "Derating Curve") WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT , 10 ~ 95% RH (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes Design refer to TUV EN60950-1, EN61347-2-13, UL8750 I/P-O/P:3.75KVAC EMC EMISSION I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015,EN61000-3-2 Class A,EN61000-3-3 EMC IMMUNITY Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A MTBF 1145.7K hrs min. DIMENSION 77*40*29(L*W*H) 0.1Kg; 120pcs/14Kg/0.93CUFT PACKING NOTE 3000ms, 200ms / 115VAC at full load 12ms/115VAC at full load FREQUENCY RANGE PROTECTION OVER VOLTAGE OTHERS LPS 250mVp-p SETUP, RISE TIME LEAKAGE CURRENT (Note 5) SELV 3.0% LOAD REGULATION VOLTAGE RANGE 110 MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristic for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name: APC-16-SPEC 2011-07-09 APC-16 16W Single Output Switching Power Supply Mechanical Specification series Unit:mm 90 82.5 77 150 10 UL1569 18AWG AC/N(Blue) AC/L(Brown) 15.5 40 19 +V(Red) -V(Black) 31 UL1569 20AWG T case 150 10 29 T case: Max. Case Temperature Block Diagram I/P fosc : 67KHz EMI FILTER POWER SWITCHING RECTIFIERS RECTIFIERS & FILTER +V -V DETECTION CIRCUIT PWM CONTROL Derating Curve Static Characteristics 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 -30 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 100 200 210 220 230 240 250 264 INPUT VOLTAGE (VAC) 60Hz File Name: APC-16-SPEC 2011-07-09