MIC5280 25mA, 120V, Low IQ, High PSRR LDO General Description Features The MIC5280 is a high performance low dropout regulator, offering a very low noise output with a very wide input voltage operating range, up to 120V DC input voltage. Ideal for high input voltage applications such as industrial and telecom, the MIC5280 offers 2% initial accuracy, extremely high power supply rejection ratio (PSRR > 80dB) and low ground current (typically 31µA). The MIC5280 can also be put into a zero-off-mode current state, drawing a minuscule amount of current when disabled. The MIC5280 has a very wide input voltage range, with a DC rating from –24V to 120V. The MIC5280 is optimized for line transient response, making it ideal for harsh environment applications. The MIC5280 has an operating junction temperature range of –40°C to +125°C and is available in an adjustable output voltage version in a lead-free (RoHS compliant) 8pin EPAD SOIC packaging. Data sheets and support documentation can be found on Micrel’s web site at: www.micrel.com. • • • • • • • • • Wide input voltage range: 4.5V to 120V DC Very low quiescent current: 31µA typical 25mA guaranteed output current Adjustable output from 1.215V to 5V DC voltage protection down to -24V Ability to withstand up to +120V DC at the input Stable with ceramic output capacitors Ultra High PSRR > 80dB for RF applications High output accuracy – ± 2% initial accuracy – ± 3% over temperature (–40°C to +125°C) • Thermal shutdown and current limit protection • Thermally efficient 8-pin EPAD SOIC package Applications • Industrial applications • Remote keyless entry power supply • Telecom applications • Off-line power supplies ___________________________________________________________________________________________________________ Typical Application Telecom Application Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com January 2009 M9999-012209-A Micrel, Inc. MIC5280 Ordering Information Part Number Voltage Temperature Range Package Lead Finish MIC5280YME Adj. –40° to +125°C 8-Pin EPAD SOIC Pb-Free Pin Configuration CBYP 1 8 VIN VOUT 2 7 NC ADJ 3 6 NC GND 4 5 EN 8-Pin EPAD SOIC (ME) Pin Description Pin Number Pin Name 1 CBYP Connect 10µF capacitor. Increases PSRR when VIN ≥ 6.5V. Pin Function 2 VOUT Regulator Output Pin. Connect 2.2µF for better stable operation. 3 ADJ Connect pin 3 to external resistor divider to set VOUT. 4 GND Ground. 5 EN Enable pin. Enable Low turns part OFF, Enable High turns part ON. 6, 7 NC Not internally connected. 8 VIN Supply Input pin. Supply (Input): -24V to 120V input voltage. EP – January 2009 Exposed Pad – Connect to Ground plane trace. 2 M9999-012209-A Micrel, Inc. MIC5280 Absolute Maximum Ratings(1) Operating Ratings(2) Supply Voltage (VIN) ..................................... –24V to +120V Enable Voltage (VEN)...................................... –1V to +120V (3) Power Dissipation (PD) ........................... Internally Limited Max Reflow Temperature (per IPC/JEDEC 20°C) ..... 260°C Junction Temperature (TJ) ........................ –40°C to +150°C Storage Temperature (TS)......................... –65°C to +150°C (4) ESD Rating .................................................................. 2kV Supply Voltage (VIN) ...................................... 4.5V to +120V Enable Voltage (VEN)........................................ 0V to +120V Junction Temperature (TJ) ........................ –40°C to +125°C Junction Thermal Resistance EPAD SOIC-8 (θJA) ............................................41°C/W Electrical Characteristics(5) VIN = 12V; VEN = 2V; COUT = 2.2µF; CBYP = 10µF; IOUT = 100µA; TJ = 25°C, bold values indicate –40°C to +125°C, unless noted. Parameter Condition Min Output Voltage Accuracy Variation from nominal VOUT –2 +2 % Variation from nominal VOUT, –40°C to +125°C –3 +3 % ADJ Pin Voltage Line Regulation Max 1.219 (6) Load Regulation Typ (7) ΔVIN = 6.5V to 120V –0.5 IOUT = 100µA to 25mA 0.04 Units V 0.5 % –0.5 0.2 0.5 % IOUT = 100µA; VIN = 4.5V; Adjust Pin = 0V 0 430 700 mV IOUT = 10mA; VIN = 4.5V; Adjust Pin = 0V 0 800 1000 mV IOUT = 25mA; VIN = 4.5V; Adjust Pin = 0V 0 1100 1500 mV IOUT = 100µA 0 31 50 µA IOUT = 25mA 0 260 400 µA Ground Pin Current in Shutdown VEN ≤ 0.3V 0 0.02 1 µA VEN ≤ 0.3V, –40°C to +125°C 0 Ripple Rejection f = up to 1kHz Current Limit VOUT = 0V; VIN = 4.5V Dropout Voltage Ground Pin Current VIN = –24V; VEN = 0.3V IOUT Reverse Current VIN = 0V; VOUT = 5V; VEN = 0.3V µA dB 40 70 mA 70 100 mA 0.4 0.03 50 µA 3 10 µA VOUT = 0V; VIN = 14.4V IDD Reverse Battery 5 80 ADJ Pin Current 3.3 nA Output Voltage Noise 120 µVRMS Enable Input Enable Input Voltage Logic Low Logic High Enable Input Current Turn-on Time January 2009 0.3 V V 2.0 VEN ≤ 0.3V; VIN = 12V 0 0.02 1 µA VEN ≥ 2.0V; VIN = 12V 0 0.12 1 µA VIN = 4.5V; VEN = 120V 0 0.15 10 µA 0.1 1 COUT = 2.2µF; IOUT = 25mA 3 ms M9999-012209-A Micrel, Inc. MIC5280 Notes: 1. Exceeding the absolute maximum rating may damage the device. 2. The device is not guaranteed to function outside its operating rating. 3. The maximum allowable power dissipation of any TA (ambient temperature) is PD(max) = (TJ(max) – TA) / θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. 4. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5kΩ in series with 100pF. 5. Specification for packaged product only. 6. Line regulation is a percentage of VOUT. 7. Regulation is measured at constant junction temperature using low duty cycle pulse testing; changes in output voltage due to heating effects are covered by the thermal regulation specification. January 2009 4 M9999-012209-A Micrel, Inc. MIC5280 Typical Characteristics Power Supply Rejection Ratio 120 3.155 3.154 3.153 100µA 100 80 60 1mA 10mA 25mA 40 1.225 1.224 1.223 100 1000 10000 100000 FREQUENCY (Hz) Feedback Voltage vs. Temperature V OUT = 3.15V CIN = 0.18µF COUT = 2.2µF Load = 100µA 20 40 60 80 100 120 INPUT VOLTAGE (V) Ground Current vs. Output Current 4.994 4.992 4.990 0 35 5 10 15 20 LOAD CURRENT (mA) 25 Ground Current vs. Temperature 32 –40°C Load=100µA 200 120°C 150 Load=25mA 25°C 100 V IN = 12V V OUT = 5V CIN = 0.18µF COUT = 2.2µF 50 1.215 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (°C) Dropout Voltage vs. Output Current 1.2 1.0 0.8 0.6 0.4 VIN = 4.5V CIN = 0.18µF COUT = 2.2µF 0.2 80 77 74 5.000 4.998 4.996 VIN=120V 1.218 1.217 1.216 0 0 5.002 250 1.222 1.221 1.220 1.219 1.4 300 EN = VBYP V IN = 12V V OUT = 5V CIN = 0.18µF COUT = 2.2µF 5.006 5.004 3.152 3.151 3.150 3.149 3.145 0 5.010 Output Voltage vs. Load Current 5.008 3.148 3.147 3.146 20 0 10 Output Voltage vs. Input Voltage 5 10 15 20 25 OUTPUT CURRENT (mA) Current Limit vs. Temperature 71 68 65 62 59 56 53 VIN=12V VIN=4.5V 50 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (°C) January 2009 0 0 5 10 15 20 25 OUTPUT CURRENT (mA) Dropout Voltage vs. Temperature 1.2 1.1 Load=25mA 1.0 0.9 0.8 Load=10mA 0.7 0.6 0.5 0.4 0.3 Load=100µA 0.2 0.1 0 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (°C) 3.40 3.37 3.34 Adjust Pin Current vs. Temperature V IN=12V 29 VIN=4.5V 26 23 EN = VIN Load = 100µA 20 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (°C) 79 Current Limit vs. Input Voltage 76 73 70 67 64 61 58 55 0 1.1 V OUT = 3.15V COUT = 2.2µF 20 40 60 80 100 120 INPUT VOLTAGE (V) Enable Threshold vs. Temperature Load = 100µA 1.0 3.31 3.28 3.25 3.22 0.9 3.19 3.16 3.13 0.6 0.8 0.7 0.5 V EN = 12V 3.10 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (°C) 5 0.4 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (°C) M9999-012209-A Micrel, Inc. MIC5280 Typical Characteristics (continued) 0.20 0.18 0.16 Enable Current vs. Enable Voltage 0.135 0.133 0.131 0.14 0.12 0.10 0.08 0.129 0.127 0.125 0.123 0.06 0.04 0.02 0.121 0.119 0.117 0 0 70 V IN = 12V 20 40 60 80 100 120 ENABLE VOLTAGE (V) VIN Current vs. Input Voltage Enable Current vs. Temperature 6.5 5.5 VIN=12V 4.5 3.5 V IN=120V 60 2.5 Load=100µA Load=10mA 1.5 0.115 -40 -20 0 20 40 60 80 100 120 TEMPERATURE (°C) 10 0.5 0 1.5 V OUT = 5V COUT = 2.2µF 2.5 3.5 4.5 5.5 INPUT VOLTAGE (V) 6.5 Output Noise Spectral Density Noise(10Hz to 100kHz)=113µV RMS V IN = 3.6V V OUT = 3.3V COUT = 2.2µF CBYP = 0.1µF Load = 25mA 50 1 40 Low Voltage Behavior 30 20 0.1 10 VOUT = 1.2V CIN = 0.18µF COUT = 2.2µF IOUT = 0A 0 0 24 48 72 96 INPUT VOLTAGE (V) January 2009 120 0.01 10 100 1k 10k 100k FREQUENCY (Hz) 6 1M M9999-012209-A Micrel, Inc. MIC5280 Functional Characteristics January 2009 7 M9999-012209-A Micrel, Inc. MIC5280 Functional Diagram VIN EN > Bypass Regulator + < EN Post Regulator 1.2V CBYP EN > 1.22V EN Enable EN VOUT EN > EN > ADJ GND January 2009 8 M9999-012209-A Micrel, Inc. MIC5280 EN Pin EN pin is a logic level enable input which turns MIC5280 on/off. Drive EN pin level high to turn the device ON and drive EN pin low to keep the device in shutdown mode. In shutdown mode the MIC5280 draws typically 20nA from the input supply. EN pin can withstand 120V, allowing EN always connected to input supply for always-ON operation. Functional Description MIC5280 is a high performance linear regulator which accepts wide input operating range 4.5V to 120V. This allows the use in harsh environments. The input can surge from 0V to 120V within a millisecond. The first stage bypass regulator isolates output from this input by producing an intermediate head voltage which is a inputto-post regulator. This post regulator gives the control to regulate the required output voltage. The output voltage is adjustable from 1.22V to 5V. ADJ Pin ADJ pin gives the flexibility to set the output voltage to the requirement from 1.22V to 5V. Use a resistor divider from output and connect to ADJ pin, internal reference is typically 1.219V. VIN Pin VIN pin is the supply input pin. A 0.18µF or larger capacitor with proper voltage rating is recommended for filtering the input voltage variations and noise on the input voltage. This capacitor should be close to the VIN and GND pins. GND Pin This GND pin provides the ground for all the electrical connections. MIC5280 has exposed pad underneath the package which should be connected to ground. If this exposed pad is connected to wide ground plane it would improve the thermal performance of MIC5280. CBYP Pin The Bypass pin is the output of the Bypass regulator and the input of the post regulator. By connecting a capacitor from the CBYP pin-to-GND, a greater stability and a much higher PSRR is achieved. A 10µF ceramic capacitor is recommended and this significantly decreases VOUT noise and perturbations due to line transients. When the MIC5280 is enabled, the Bypass pin voltage is regulated at 5.5V. To maintain 5.5V regulation and high PSRR, the VIN must be no lower than 6.5V. For VIN less than 6.5V while in dropout, the PSRR is reduced. January 2009 NC Pins There are two NC pins on the package which are not connected internally. VOUT Pin The VOUT pin is the regulated output of the post regulator. When the MIC5280 is enabled, VOUT regulates at a fixed voltage, when disabled, VOUT is high impedance. A 2.2µF or larger ceramic capacitor must be connected to VOUT pin-to-ground. 9 M9999-012209-A Micrel, Inc. MIC5280 PSRR Power Supply Rejection Ratio is the measure of a VOUT signal caused by a signal on the VIN pin. The ratio of VIN/VOUT in dB is PSRR. The MIC5280’s PSRR from 0Hz to 1kHz exceeds 80dB. Application Information MIC5280 is a linear regulator with a wide operating range of input voltage 4.5V to 120V. The input can go down to –24V without any damage to the device. This feature gives the advantage to use in harsh environment applications such as remote keyless entry and telecom applications. Output Voltage Setting For this adjustable regulator, VOUT is programmable from 1.22V to 5.0V. A 2.2µF or larger capacitor must be connected to VOUT pin-to-ground to maintain stability. This capacitor value can be increased without bound. The VOUT capacitor can have an ESR of 0Ω. When VIN is lower than VOUT, VOUT is not pulled low by VIN. A small current, typically 4µA, will sink into VOUT pin. The output voltage is controlled by the feedback resistors (R1 and R2) and can be calculated as follows: Thermal Protection MIC5280 has internal thermal shutdown to protect from over dissipation and failure. When the junction temperature exceeds +160°C, an internal thermal sensor signals the shutdown logic to turn off the pass transistor and allows the IC to cool. The thermal sensor turns the pass transistor on again after the junction temperature cools by 10°C. This results in a cycled output during continuous thermal overload conditions. The recovery from thermal shutdown is smooth without any overshoot. For continuous operation, do not exceed the maximum junction temperature rating of +125°C. ⎛ R1 ⎞ VOUT = VREF ⋅ ⎜ + 1⎟ ⎝ R2 ⎠ VREF = 1.219V The evaluation board is initially adjusted to 5V, but can easily be modified by removing R1 and replacing it with the value that yields the desired output voltage. Current Limit MIC5280 has a current limit protection to protect it from over loads. The recovery from current limit protection is smooth without any overshoots. The output can be shorted to GND for an indefinite period of time without damage to the device. During a short circuit, the power dissipated across the pass transistor can quickly heat the device. When the die temperature reaches +160°C, the MIC5280 shut down and automatically restart after the die temperature cools by 10°C. This results in a pulsed output operation. ⎛V ⎞ R1 = R 2 ⋅ ⎜⎜ OUT − 1⎟⎟ V ⎝ REF ⎠ Ensure the output voltage selected does not exceed 5V. Enable Pin The voltage on enable pin EN of MIC5280 could vary from –1V to 120V. So enable pin EN of MIC5280 can be used in a different configuration as the application dictates. If the MIC5280 needs to be always enabled then simply connect the EN pin to CBYP pin, as shown in Figure 1. Then whenever VIN has a supply voltage output is developed. Input can swing from –24V to 120V. One can also connect EN pin through 100kΩ resistor to input as shown in Figure 2 to achieve the same result. CBYP Output when Enable is Low When the Enable is low and the MIC5280 is disabled, while VIN voltage is present, the CBYP pin voltage is typically 4.5V, even for VIN as high as 120V. The Bypass regulator although maintaining the Bypass voltage, requires no current from VIN other than leakage current. Bypass Capacitor A 10µF capacitor should be connected from bypass pin to ground to maintain stability of the bypass regulator. The voltage rating of the capacitor must be 8V or higher. Low ESR ceramic capacitors work well. Although a 1µF capacitor maintains good AC power supply rejection, higher capacitance values will enhance AC power supply rejection. January 2009 10 M9999-012209-A Micrel, Inc. MIC5280 Figure 1. MIC5280 EN Always Enabled Figure 2. Enable Connected to VIN Application January 2009 11 M9999-012209-A Micrel, Inc. MIC5280 Bill of Materials Item Part Number Manufacturer (1) NMC-P1210X7R184K200TRPLPF NIC C1812C184K2RAC Kemet C1 C3 R1 Capacitor, 0.18µF, 200V, Size 1210 Capacitor, 0.18µF, 200V, Size 1812 (3) Vishay C1608X5R1A225K TDK 0603C225MAT AVX GRM188R60J225KE19D Qty. (2) VJ1812Y184KXC C2 Description (4) Capacitor, 2.2µF,10V, X5R, Size 0603 (5) Capacitor, 2.2µF,6.3V, X7R, Size 0603 Murata (6) 1 Capacitor, 2.2µF,6.3V, X5R, Size 0603 (4) C1608X5R0J105K TDK VJ0603G105KXYPW1BC Vishay (3) GRM188R60J105KA01D Murata CRCW060315R4FKEYE3 Vishay Capacitor, 1µF,6.3V, X5R, Size 0603 1 Resistor, 15.4k, 1%, 1/16W, Size 0603 1 Resistor, 4.8k, 1%, 1/16W, Size 0603 1 25mA, 120V, Low IQ, High PSRR LDO 1 (6) (3) (3) R2 CRCW06034R87FKEYE3 Vishay U1 MIC5280YME Micrel, Inc. (7) Notes: 1. NIC: www.nic.com 2. Kemet Electronics: www.ketem.com 3. Vishay: www.vishay.com 4. TDK: www.tdk.com 5. AVX: www.avx.com 6. Murata: www.murata.com 7. Micrel, Inc.: www.micrel.com January 2009 1 12 M9999-012209-A Micrel, Inc. MIC5280 PCB Layout Recommendations Top Layer Bottom Layer January 2009 13 M9999-012209-A Micrel, Inc. MIC5280 Package Information 8-Pin EPAD SOIC (ME) MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2008 Micrel, Incorporated. January 2009 14 M9999-012209-A