MICREL SY100S313JZ

SY100S313
Micrel, Inc.
QUAD DRIVER
DESCRIPTION
FEATURES
■
■
■
■
■
■
■
■
■
The SY100S313 offers four drivers with two OR and two
NOR outputs, designed for use in high-performance ECL
systems. The four drivers are controlled by a common
Enable signal which is buffered to minimize input loading.
If the D inputs are not used, the Enable signal can be used
to drive sixteen 50Ω lines. All inputs have 75kΩ pulldown
resistors and all outputs are buffered.
Max. propagation delay of 800ps
Enable to Output max. of 950ps
IEE min. of –60mA
Extended supply voltage option:
VEE = –4.2V to –5.5V
Voltage and temperature compensation for
improved noise immunity
Internal 75kΩ input pull-down resistors
50% faster than Fairchild 300K
Function and pinout compatible with Fairchild F100K
Available in 28-pin PLCC package
BLOCK DIAGRAM
Da
Db
Dc
Dd
E
M9999-042307
[email protected] or (408) 955-1690
SY100S313
PIN NAMES
Pin
O1a
O2a
O1a
O2a
O1b
O2b
O1b
O2b
Function
Da – Dd
Data Inputs (n-1...5)
E
Enable Input
Ona – Ond
Data Outputs
Ona – Ond
Complementary Data Outputs
VEES
VEE Substrate
VCCA
VCCO for ECL Outputs
O1c
O2c
O1c
O2c
O1d
O2d
O1d
O2d
Rev.: I
1
Amendment: /0
Issue Date: April 2007
SY100S313
Micrel, Inc.
Ordering Information
O1b
O2a
O2b
O1a
O2a
Oa
VEES
PACKAGE/ORDERING INFORMATION
Part Number
Package
Type
Operating
Range
Package
Marking
Lead
Finish
SY100S313JC
J28-1
Commercial
SY100S313JC
Sn-Pb
SY100S313JCTR(1)
J28-1
Commercial
SY100S313JC
Sn-Pb
VCC
VCC
SY100S313JZ(2)
J28-1
Commercial
SY100S313JZ with
Pb-Free bar-line indicator
Matte-Sn
O1c
SY100S313JZTR(1, 2)
J28-1
Commercial
SY100S313JZ with
Pb-Free bar-line indicator
Matte-Sn
11 10 9 8 7 6 5
Da
Db
12
13
VEE
VEES
14
15
E
Dc
16
17
28
27
Dd
18
26
Top View
PLCC
J28-1
4
3
O2b
O1b
2
1
VCCA
O2c
19 20 21 22 23 24 25
O1c
O2d
O2c
VEES
o1d
O2d
O1d
Notes:
1. Tape and Reel.
2. Pb-Free package is recommended for new designs.
28-Pin PLCC (J28-1)
M9999-042307
[email protected] or (408) 955-1690
2
SY100S313
Micrel, Inc.
LOGIC EQUATION
O=D+E
O=D+E
DC ELECTRICAL CHARACTERISTICS
VEE = –4.2V to –5.5V unless otherwise specified, VCC = VCCA = GND
Symbol
Parameter
IIH
Input HIGH Current, All Inputs
IEE
Power Supply Current
Min.
Typ.
Max.
Unit
Condition
—
—
200
µA
VIN = VIH (Max.)
–60
–43
–20
mA
Inputs Open
AC ELECTRICAL CHARACTERISTICS
VEE = –4.2V to –5.5V unless otherwise specified, VCC = VCCA = GND
TA = 0°C
Symbol
Parameter
TA = +25°C
TA = +85°C
Min.
Max.
Min.
Max.
Min.
Max.
Unit
tPLH
tPHL
Propagation Delay
Data to Output
200
800
200
800
200
800
ps
tPLH
tPHL
Propagation Delay
Enable to Output
300
950
300
950
300
950
ps
tTLH
tTHL
Transition Time
20% to 80%, 80% to 20%
300
900
300
900
300
900
ps
TIMING DIAGRAM
0.7 ± 0.1 ns
0.7 ± 0.1 ns
INPUT
–0.95V
80%
50%
20%
–1.69V
TRUE
tPHL
tPLH
50%
tPLH
OUTPUT
tPHL
80%
50%
20%
COMPLEMENT
tTLH
tTHL
Propagation Delay and Transition Times
NOTE:
VEE = –4.2V to –5.5V unless otherwise specified, VCC = VCCA = GND
M9999-042307
[email protected] or (408) 955-1690
3
Condition
SY100S313
Micrel, Inc.
28-PIN PLCC (J28-1)
Rev. A
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131
TEL
+ 1 (408) 944-0800
FAX
+ 1 (408) 474-1000
WEB
USA
http://www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2006 Micrel, Incorporated.
M9999-042307
[email protected] or (408) 955-1690
4