HT1884 Extractor Tool Extractor Tool Instruction Sheet Order No. 11-03-0003 Engineering No. (HT1884) FEATURES This tool is designed to extract different terminal series from various plug and receptacle housings. See Chart below. SCOPE Products: KK 3.96mm (.156 in) pitch Crimp Terminals Terminal Series No 1797 1799 4366 4573 Description Housings Series No Terminal Order No. 08-01-0101 08-01-0121 KK 3.96mm (.156 in) pitch 1796 08-03-0101 Bifurcated Terminals 08-05-0105 08-06-0106 2139, 41696, 08-30-0109 KK 3.96mm (.156 in) pitch 52213 and 52266 08-34-0109 Right Angle Terminal 08-03-0303 KK 3.96mm (.156 in) pitch 4338 08-05-0305 Straight- On Dualcon TM Terminals 08-03-0305 KK 3.96mm (.156 in) pitch 4338 50-36-2431 Cantilever Straight-On Terminals 08-01-0102 08-01-0122 08-03-0102 08-06-0101 08-07-0101 08-30-0110 08-35-0105 08-03-0304 40-01-1194 08-03-0306 50-36-2432 08-01-0105 08-01-0123 08-05-0103 08-06-0102 08-07-0102 08-34-0105 08-35-0106 08-05-0301 50-36-1873 08-05-0303 08-01-0106 08-01-0124 08-05-0104 08-06-0105 08-34-0106 08-05-0302 08-05-0304 OPERATION: HOUSING WIRE 1. Push the terminal forward in the arrow direction before using the Extractor Tool as shown in Figure 1. Insert the Extractor Tool into the slot on the bottom or top of the connector housing. EXTRACTOR TOOL HOUSING LOCKING TAB TERMINAL EXTRACTOR TOOL Figure 1 Doc No: ATS-011030003 Revision: E Release Date: 01-31-02 Revision Date: 09-29-09 UNCONTROLLED COPY Page 1 of 2 HT1884 Extractor Tool 2. Depress the terminal locking tabs, push the terminal back through the Connector slot and pull the terminated wire out in the arrow direction as shown in Figure 2. TERMINAL WIRE HOUSING LOCKING TAB EXTRACTOR TOOL TERMINAL LOCKING TAB EXTRACTOR TOOL Figure 2 CAUTION: Molex specifications are valid only when used with Molex terminals, applicators and tooling. Molex does not offer repair parts for Extraction Tools due to the inexpensive nature of the tool. Contact Information For more information on Molex application tooling please contact your nearest Molex location shown below. Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http://www.molex.com Doc No: ATS-011030003 Revision: E Release Date: 01-31-02 Revision Date: 09-29-09 UNCONTROLLED COPY Page 2 of 2