Application Tooling FEATURES AND SPECIFICATIONS Flat Flexible Cable Connectors Features and Benefits n Tool kit for use with all Molex standard presses n Full cycle ratchet assures quality termination n Flexible connector nest adjustable for 2 to 16 circuit sizes n Built-in nest locator assures connector is in proper position for termination n Adjustable cable guides and stop for repeatable cable/ connector alignment n Able to terminate membrane switch tails, flat flexible cable, and flexible printed circuit n Feature to assist with insertion of terminals and carrier strip break off to complete assembly Standard Press Connector Series 40556, 70430, 70431 Specifications Size: With Press - Height—498.00mm (19.60”) Width—269.00mm (10.60”) Depth—152.40mm (6.00”) Tooling Only - Height—45.00mm (1.77”) Width—114.00mm (4.48”) Depth—237.00mm (9.33”) Weight: With Press—24.1 kg (53 lbs.) Tooling Only—1.8 kg (4 lbs.) Rate: 180 terminations per hour depending on operator skill ORDERING INFORMATION Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Order No. DHL-0002 Order No. Description 62200-7800 Took Kit with Manual Press 62200-7400 Tool Kit for Manual Press 11-31-6356 Molex Manual Press Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] Visit our website at www.molex.com Printed in USA/100/JI/JI/2006.05 European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 ©2006, Molex