2.50mm (.098") Pitch Mini-Lock™ Description Order No. Circuits Wire Range Mated Dimensions Material — Tin Plated Phosphor Bronze Packaging Terminals 50351-8000 Female Crimp Terminal Reel — 22 - 28 AWG 50351-8100 Bag 50837-8000 Male Crimp Terminal Reel — 22 - 28 AWG Tin Plated Phosphor Bronze — 50837-8100 Bag Crimp Housings Positive Locking Receptacle Housing 51103-XX00 02 - 15 — 51198-XX00 02 - 10, 12, 14, 15 — 53375-YY10 02 - 15 — — PBTP Bag PBT Bag 23.00mm (.906") 7.80mm (.307") Headers Vertical Header with Peg Tray 11.50mm (.453") 53375-YY90 02 - 08 — 7.60mm (.200") 53426-XX19 02 - 15 — 14.35mm (565") Right Angle Header 53426-XX70 02 - 08 7.75mm (.305") — Glass-filled PBTP Radial Tape Tray Glass-filled PBTP Radial Tape Replace “XX” with number of circuits. Replace “YY” with number of circuits plus 30; for example an 11 circuit header is part number 53375-4110 Note: Mated receptacle to header dimensions are for the -YY10 and -XX19 versions APPLICATION TOOLING Terminal Insulation Diameter Strip Length 50351-8000 TM-2000 Applicator Order No. TM-40/TM-42 Applicator Extractor Tool Hand Tool 63860-5100 63850-5100 57309-6000 — — — 57309-6000 57295-5000 50837-8000 Contact Molex Contact Molex — — 50837-8100 — — — 57391-5000 50351-8100 1.80mm (.071") max. 2.30 - 2.80mm (.091 to .110") 2.50mm (.098") Pitch Mini-Lock™ Plug Housing 2.50mm (.098") Pitch Mini-Lock™ FEATURES AND BENEFITS ■ Four point contact design for greater reliability ■ Anti-fishhooking contact design eliminates tangling of crimped leads during cable assembly ■ Locking tang on contact for secure retention to the housing ■ Positive lock on receptacle housing assures secure ■ Over-stress feature protects the locking latch ■ Kinked solder tails assure PCB retention during wave ■ Pull tabs assist in easy unmating soldering ■ Fully shrouded headers with guide ramp protects pins ■ Polarized mating geometry assures headers and and aids mating receptacles cannot be mis-mated ■ Polarizing peg on vertical headers assures proper ■ Lead-free plating orientation on PCB retention when mated to headers SPECIFICATIONS 2.50mm (.098") Pitch Mini-Lock™ Reference Information Recommended Wire Style: UL 1007 UL File No.: E29179 CSA File No.: LR19980 TUV Approved RoHS Compliant Electrical Current: 3.0A max. Voltage: 250V Contact Resistance: 20 milliohms max. Dielectric Withstanding Voltage: 1000V AC / 1 Minute Insulation Resistance: 1000 Megohms min. Physical Housing: PBTP, UL 94V-0 Header: PBTP, UL 94V-0 Terminal: Phosphor Bronze Pin: Phosphor Bronze Plating: Lead-free Tin Operating Temperature: -40 to +105°C Mechanical Mating Force (10 Circuit Parts): 6.4N max. Unmating Force (10 Circuit Parts): 0.98N min. Durability: 30 Cycles Polarized Mating Geometry Positive Lock Radial Tape Pull Tabs Fully Shrouded Header Polarized Pegs Guide Ramp Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 Visit our Web site at http: //www.molex.com Order No. USA-215 Printed in USA/7.5K/JI/JI/2004.04 ©2004, Molex