Power TOPLED® Enhanced optical Power LED (ATON®) LB E67C, LV E67C, LT E67C Vorläufige Daten / Preliminary Data Besondere Merkmale • Gehäusetyp: weißes P-LCC-4 Gehäuse • Besonderheit des Bauteils: mehr Licht durch erhöhten optischen Wirkungsgrad; höhere Umgebungstemperatur bei gleichem Strom im Vergleich zur TOPLED® möglich • Wellenlänge: 469 nm (blau), 503 nm (verde), 525 nm (true green) • Abstrahlwinkel: Lambertscher Strahler (120°) • Technologie: InGaN • optischer Wirkungsgrad: 3 lm/W (blau), 10 lm/W (verde), 13 lm/W (true green) • Gruppierungsparameter: Lichtstärke, Wellenlänge • Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet • Lötmethode: IR Reflow Löten und Wellenlöten (TTW) • Vorbehandlung: nach JEDEC Level 2 • Gurtung: 8 mm Gurt mit 2000/Rolle, ø180 mm oder 8000/Rolle, ø330 mm • ESD-Festigkeit: ESD-sicher bis 2 kV nach EOS/ESD-5.1-1993 Features • package: white P-LCC-4 package • feature of the device: more light due to higher optical efficiency; higher ambient temperature at the same current possible compared to TOPLED® • wavelength: 469 nm (blue), 503 nm (verde), 525 nm (true green) • viewing angle: Lambertian Emitter (120°) • technology: InGaN • optical efficiency: 3 lm/W (blue), 10 lm/W (verde), 13 lm/W (true green) • grouping parameter: luminous intensity, wavelength • assembly methods: suitable for all SMT assembly methods • soldering methods: IR reflow soldering and TTW soldering • preconditioning: acc. to JEDEC Level 2 • taping: 8 mm tape with 2000/reel, ø180 mm or 8000/reel, ø330 mm • ESD-withstand voltage: up to 2 kV acc. to EOS/ESD-5.1-1993 Anwendungen • Ampelanwendung (verde) • Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) • Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u. ä.) • Ersatz von Kleinst-Glühlampen • Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.ä.) • Signal- und Symbolleuchten • Scanner Applications • traffic lights (verde) • backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) • interior automotive lighting (e.g. dashboard backlighting, etc.) • substitution of micro incandescent lamps • marker lights (e.g. steps, exit ways, etc.) • signal and symbol luminaire • scanners 2002-07-17 1 LB E67C, LV E67C, LT E67C Lichtstärke Lichtstrom Bestellnummer Luminous Intensity IF = 30 mA IV (mcd) Luminous Flux IF = 30 mA ΦV (mlm) Ordering Code Typ Emissionsfarbe Type Color of Emission LB E67C-P2Q2-35 LB E67C-Q2S1-35 blue colorless clear 56 ... 112 90 ... 224 250 (typ.) Q62703-Q6235 470 (typ.) Q62703-Q6236 LV E67C-S2T2-35 LV E67C-T2V1-35 verde colorless clear 224 ... 450 355 ... 900 1000 (typ.) Q62703-Q6286 1900 (typ.) Q65110-A0185 LT E67C-S2T2-35 LT E67C-T2V1-35 true green colorless clear 224 ... 450 355 ... 900 1000 (typ.) Q65110-A0273 1900 (typ.) Q65110-A0274 Farbe der Lichtaustrittsfläche Color of the Light Emitting Area Anm.: -35 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: -35 Total color tolerance range, delivery in single groups (please see page 5) The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. 2002-07-17 2 LB E67C, LV E67C, LT E67C Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values LB Einheit Unit LV, LT Betriebstemperatur Operating temperature range Top – 40 … + 100 °C Lagertemperatur Storage temperature range Tstg – 40 … + 100 °C Sperrschichttemperatur Junction temperature Tj Durchlassstrom Forward current IF Stoßstrom Surge current t ≤ 10 µs, D = 0.005 IFM Sperrspannung Reverse voltage VR 5 Leistungsaufnahme Power consumption Ptot 140 mW 350 K/W 180 K/W Wärmewiderstand Thermal resistance Rth JA Sperrschicht/Umgebung Junction/ambient Rth JS Sperrschicht/Lötpad Junction/solder point Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2) mounted on PC board FR 4 (pad size ≥ 16 mm 2) 2002-07-17 3 + 110 + 125 30 200 250 °C mA mA V LB E67C, LV E67C, LT E67C Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LB LV LT Wellenlänge des emittierten Lichtes Wavelength at peak emission IF = 30 mA (typ.) λpeak 464 501 520 nm Dominantwellenlänge 1) Dominant wavelength IF = 30 mA (typ.) λdom 469 ±6 503 ±6 525 ±9 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 30 mA (typ.) ∆λ 25 30 33 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2ϕ 120 120 120 Grad deg. Durchlassspannung 2) Forward voltage IF = 30 mA (typ.) (max.) VF VF 4.1 4.6 3.8 4.6 3.8 4.6 V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 µA µA Temperaturkoeffizient von λpeak Temperature coefficient of λpeak IF = 30 mA; –10°C ≤ T ≤ 100°C (typ.) TCλpeak 0.05 0.03 0.04 nm/K Temperaturkoeffizient von λdom Temperature coefficient of λdom IF = 30 mA; –10°C ≤ T ≤ 100°C (typ.) TCλdom 0.04 0.02 0.03 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 30 mA; –10°C ≤ T ≤ 100°C (typ.) TCV – 3.1 – 3.2 – 3.6 mV/K Optischer Wirkungsgrad Optical efficiency IF = 30 mA (typ.) ηopt 3 10 13 lm/W 1) Wellenlängengruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt. Wavelength groups are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm. 2) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V. 2002-07-17 4 LB E67C, LV E67C, LT E67C 1) Wellenlängengruppen / Wavelength groups Gruppe Group blue verde true green min. max. min. max. min. Einheit Unit max. 3 463 467 497 501 516 522 nm 4 467 471 501 505 522 528 nm 5 471 475 505 509 528 534 nm Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group Lichtstrom Luminous Flux ΦV (mlm) Lichtstärke Luminous Intensity IV (mcd) P2 Q1 Q2 R1 R2 S1 S2 T1 T2 U1 U2 V1 56 … 71 … 90 … 112 … 140 … 180 … 224 … 280 … 355 … 450 … 560 … 710 … 71 90 112 140 180 224 280 355 450 560 710 900 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) 1200 (typ.) 1500 (typ.) 1900 (typ.) 2400 (typ.) Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ± 11%. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: S2-3 Example: S2-3 Lichtgruppe Luminous Intensity Group Halbgruppe Half Group Wellenlänge Wavelength S 2 3 2002-07-17 5 LB E67C, LV E67C, LT E67C Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 30 mA Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit Standard eye response curve OHL00492 100 I rel % 80 Vλ 60 blue verde true green 40 20 0 400 450 500 550 650 600 nm 700 λ Abstrahlcharakteristik Irel = f (ϕ) Radiation Characteristic 40˚ 30˚ 20˚ 10˚ 0˚ ϕ 50˚ OHL01660 1.0 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 0 90˚ 100˚ 1.0 2002-07-17 0.8 0.6 0.4 0˚ 20˚ 6 40˚ 60˚ 80˚ 100˚ 120˚ LB E67C, LV E67C, LT E67C Durchlassstrom IF = f (VF) Forward Current TA = 25 °C Relative Lichtstärke IV/IV(30 mA) = f (IF) Relative Luminous Intensity TA = 25 °C OHL01619 10 2 mA OHL00036 10 1 IV IV (30 mA) IF 10 1 10 0 10 0 blue 10 -1 verde, true green 10 -1 10 -2 10 -2 verde true green blue 10 -3 1.5 2.5 3.5 4.5 10 -3 -2 10 5.5 V 6.5 VF IF OHL01488 IF 10 1 mA 10 2 OHL11489 35 mA 30 Estimated average degradation ∆I V = -50% 40 10 0 IF Maximal zulässiger Durchlassstrom IF = f (T) Max. Permissible Forward Current Maximal zulässiger Durchlassstrom IF = f (T) Max. Permissible Forward Current 50 mA 10 -1 25 35 30 20 > 5000 h > 10000 h 25 15 20 MTTF 5000 h MTTF 10000 h 15 10 10 5 5 TS temp. solder point TA temp. ambient 0 0 20 40 60 0 80 ˚C 100 T 2002-07-17 0 20 40 60 80 ˚C 100 TS 7 LB E67C, LV E67C, LT E67C Dominante Wellenlänge λdom = f (IF) Dominant Wavelength LB, TA = 25 °C Relative Lichtstärke IV/IV(25 °C) = f (TA) Relative Luminous Intensity IF = 30 mA OHL01637 1.4 IV OHL10196 474 nm λ dom V(25 ˚C) 1.2 473 1.0 472 0.8 471 0.6 470 0.4 469 0.2 468 0 -20 0 20 40 60 467 ˚C 100 0 20 40 60 80 TA I Dominante Wellenlänge λdom = f (IF) Dominant Wavelength LV, TA = 25 °C Dominante Wellenlänge λdom = f (IF) Dominant Wavelength LT, TA = 25 °C OHL10198 512 nm mA 120 OHL00199 541 nm λ dom 539 λ dom 510 537 508 535 533 506 531 true green 504 529 527 502 525 500 523 498 0 20 40 60 80 521 mA 120 I 2002-07-17 0 10 20 30 40 mA 50 IF 8 LB E67C, LV E67C, LT E67C Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 °C LB OHL01578 0.30 IF A t 0.1 0.15 0.2 OHL01579 0.30 tP A IF IF D = TP 0.25 0.20 Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 °C LB t IF D = TP 0.25 T tP T 0.20 D= 0.005 0.01 0.02 0.05 0.15 D= 0.005 0.01 0.02 0.05 0.1 0.10 0.10 0.5 0.2 0.05 0.5 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 °C LT / LV OHL01583 0.30 IF Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 °C LT / LV tP A IF IF 0.25 OHL01584 0.30 A tP D=T 0.25 T tP IF T 0.1 t 0.20 0.20 D = TP D= 0.15 0.2 0.005 0.01 0.02 0.05 0.15 D= 0.1 0.10 0.10 0.2 0.5 0.05 0.05 0.5 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2002-07-17 0.005 0.01 0.02 0.05 9 LB E67C, LV E67C, LT E67C Maßzeichnung Package Outlines 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) 1.7 (0.067) 2.1 (0.083) 0.8 (0.031) 0.6 (0.024) C 1.1 (0.043) C 0.1 (0.004) typ Package marking 0.5 (0.020) 3.7 (0.146) 3.3 (0.130) 3.4 (0.134) 3.0 (0.118) C 4˚±1 0.7 (0.028) (2.4 (0.094)) A 0.9 (0.035) 0.18 (0.007) 0.6 (0.024) 0.4 (0.016) 0.12 (0.005) GPLY6991 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gewicht / Approx. weight: 31 mg 2002-07-17 10 LB E67C, LV E67C, LT E67C Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) OHLY0597 300 ˚C T 250 240-245 ˚C 10-40 s 200 183 ˚C 120 to 180 s Ramp-down rate up to 6 K/s 150 Defined for Preconditioning: up to 6 K/s 100 Ramp-up rate up to 6 K/s 50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 t 2002-07-17 11 s 250 LB E67C, LV E67C, LT E67C Wellenlöten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskühlung forced cooling 0 0 50 100 150 200 t 2002-07-17 12 s 250 LB E67C, LV E67C, LT E67C Empfohlenes Lötpaddesign Recommended Solder Pad IR Reflow Löten IR Reflow Soldering 3.3 (0.130) 3.3 (0.130) 0.4 (0.016) 2.6 (0.102) Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation Kathoden Markierung / Cathode marking 7.5 (0.295) 0.5 (0.020) 1.5 (0.059) 4.5 (0.177) 1.1 (0.043) Cu Fläche / <_ 12 mm 2 per pad Cu-area Lötstoplack Solder resist OHLPY439 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2002-07-17 13 LB E67C, LV E67C, LT E67C Wellenlöten (TTW) TTW Soldering 3.5 (0.138) Bewegungsrichtung der Platine PCB-direction 3.5 (0.138) 1 (0.039) 8 (0.315) 2 (0.079) 2 (0.079) 3 (0.118) 6 (0.236) 2.8 (0.110) 2 (0.079) 6.1 (0.240) 1.5 (0.059) Empfohlenes Lötpaddesign Recommended Solder Pad 2.8 (0.110) 0.5 (0.020) 7.5 (0.295) Padgeometrie für verbesserte Wärmeableitung Cu Fläche / > 12 mm 2 per pad Cu-area Paddesign for improved heat dissipation Lötstoplack Solder resist OHAY0583 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gurtung / Polarität und Lage Verpackungseinheit 2000/Rolle, ø180 mm oder 8000/Rolle, ø330 mm Method of Taping / Polarity and Orientation Packing unit 2000/reel, ø180 mm or 8000/reel, ø330 mm 4 (0.157) 8 (0.315) 1.75 (0.069) 2 (0.079) 3.5 (0.138) 2.9 (0.114) 4 (0.157) 3.6 (0.142) 1.5 (0.059) C C C A OHAY0536 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2002-07-17 14 LB E67C, LV E67C, LT E67C Revision History: 2002-07-17 Previous Version: Date of change 2002-07-02 Page Subjects (major changes since last revision) 4 value (forward voltage) 7 diagram OHL01569/01570 to OHL01488/11489 8 diagram OHL01620/01627/01621 to OHL10196/10198/00199 2 wavelength grouping for blue, true green and verde 2 brightness grouping for LV E63C 2002-07-17 Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2002-07-17 15