Hyper SIDELED® Hyper-Bright LED LS A676, LA A676, LO A676, LY A676 Besondere Merkmale Features • Gehäusetyp: weißes SMT Gehäuse • Besonderheit des Bauteils: Abstrahlung parallel zur Platine, deshalb ideal zur Einkopplung in Lichtleiter • Wellenlänge: 633 nm (super-rot), 615 nm (amber), 606 nm (orange), 587 nm (gelb) • Abstrahlwinkel: Lambertscher Strahler (120°) • Technologie: InGaAlP • optischer Wirkungsgrad: 11 lm/W (gelb, orange, amber), 7 lm/W (super-rot) • Gruppierungsparameter: Lichtstärke, Wellenlänge • Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet • Lötmethode: IR Reflow Löten und Wellenlöten (TTW) • Vorbehandlung: nach JEDEC Level 2 • Gurtung: 12 mm Gurt mit 2000/Rolle, ø330 mm • package: white SMT package • feature of the device: radiation direction parallel to PCB, so an ideal LED for coupling in light guides • wavelength: 633 nm (super-red), 615 (amber), 606 nm (orange), 587 nm (yellow) • viewing angle: Lambertian Emitter (120°) • technology: InGaAlP • optical efficiency: 11 lm/W (yellow, orange, amber), 7 lm/W (super-red) • grouping parameter: luminous intensity, wavelength • assembly methods: suitable for all SMT assembly methods • soldering methods: IR reflow soldering and TTW soldering • preconditioning: acc. to JEDEC Level 2 • taping: 12 mm tape with 2000/reel, ø330 mm Anwendungen Applications • optischer Indikator • Einkopplung in Lichtleiter • Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) • Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u.ä.) • Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.ä.) • Signal- und Symbolleuchten • optical indicators • coupling into light guides • backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) • interior automotive lighting. (e.g. dashboard backlighting, etc.) • marker lights (e.g. steps, exit ways, etc.) • signal and symbol luminaire 2002-09-18 1 LS A676, LA A676, LO A676, LY A676 Lichtstärke Lichtstrom Bestellnummer Luminous Intensity IF = 20 mA IV (mcd) Luminous Flux IF = 20 mA ΦV (mlm) Ordering Code Typ Emissionsfarbe Type Color of Emission LS A676-N2P2-1 LS A676-P2R1-1 super-red colorless clear 35.5 ... 71.0 56.0 ... 140.0 150 (typ.) 280 (typ.) Q62703Q5074 Q62703Q5075 LA A676-Q1R1-1 LA A676-R1S2-1 amber colorless clear 71.0 ... 140.0 112.0 ... 280.0 310 (typ.) 560 (typ.) Q62703Q4972 Q62703Q4973 LO A676-Q1R1-24 LO A676-R1S2-24 orange colorless clear 71.0 ... 140.0 112.0 ... 280.0 310 (typ.) 560 (typ.) Q62702Q5032 Q62702Q5033 LY A676-P2Q2-26 LY A676-Q2S1-26 yellow colorless clear 56.0 ... 112.0 90.0 ... 224.0 240 (typ.) 440 (typ.) Q62703Q5111 Q62703Q5112 Farbe der Lichtaustrittsfläche Color of the Light Emitting Area Anm.: -1 gesamter Farbbereich (siehe Seite 4) -24 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) -26 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: -1 Total color tolerance range (please see page 4) -24 Total color tolerance range, delivery in single groups (please see page 5) -26 Total color tolerance range, delivery in single groups (please see page 5) The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. 2002-09-18 2 LS A676, LA A676, LO A676, LY A676 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LS, LO, LA LY Betriebstemperatur Operating temperature range Top – 55 … + 100 °C Lagertemperatur Storage temperature range Tstg – 55 … + 100 °C Sperrschichttemperatur Junction temperature Tj + 100 °C Durchlassstrom Forward current IF 30 mA Stoßstrom Surge current t ≤ 10 µs, D = 0.005 IFM Sperrspannung1) Reverse voltage VR 12 V Leistungsaufnahme Power consumption Ptot 80 mW 530 K/W 300 K/W Wärmewiderstand Thermal resistance Rth JA Sperrschicht/Umgebung Junction/ambient Rth JS Sperrschicht/Lötpad Junction/solder point Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2) mounted on PC board FR 4 (pad size ≥ 16 mm 2) 1) für kurzzeitigen Betrieb geeignet / suitable for short term application 2002-09-18 3 1 0.2 A LS A676, LA A676, LO A676, LY A676 Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LS LA LO LY Wellenlänge des emittierten Lichtes Wavelength at peak emission IF = 20 mA (typ.) λpeak 645 622 610 591 nm Dominantwellenlänge 1) Dominant wavelength 1) IF = 20 mA (typ.) λdom 633 ±6 615 ±6 606 587 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) ∆λ 16 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2ϕ 120 120 120 120 Grad deg. Durchlassspannung 2) Forward voltage 2) IF = 20 mA (typ.) (max.) VF VF 2.0 2.4 2.0 2.4 2.0 2.4 2.0 2.4 V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 0.01 10 µA µA –6/+3 –7/+8 Temperaturkoeffizient von λpeak Temperature coefficient of λpeak IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCλpeak 0.14 0.13 0.13 0.13 nm/K Temperaturkoeffizient von λdom Temperature coefficient of λdom IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCλdom 0.05 0.06 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCV – 2.0 – 1.8 – 1.7 – 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) ηopt 7 11 11 11 lm/W 1) Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm. 2) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V. 2002-09-18 4 LS A676, LA A676, LO A676, LY A676 1) Wellenlängengruppen / Wavelength groups Gruppe Group yellow orange min. max. min. Einheit Unit max. 2 580 583 600 603 nm 3 583 586 603 606 nm 4 586 589 606 609 nm 5 589 592 nm 6 592 595 nm Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group Lichtstärke Luminous Intensity IV (mcd) N2 P1 P2 Q1 Q2 R1 R2 S1 S2 35.5 ... 45.0 45.0 ... 56.0 56.0 ... 71.0 71.0 ... 90.0 90.0 ... 112.0 112.0 ... 140.0 140.0 ... 180.0 180.0 ... 224.0 224.0 ... 280.0 Lichtstrom Luminous Flux ΦV (mlm) 120 (typ.) 150 (typ.) 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±11 % ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ±11 %. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: P2-3 Example: P2-3 Lichtgruppe Luminous Intensity Group Halbgruppe Half Group Wellenlänge Wavelength P 2 3 2002-09-18 5 LS A676, LA A676, LO A676, LY A676 Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 20 mA Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit Standard eye response curve OHL00235 100 Irel % 80 Vλ 60 yellow orange amber super-red 40 20 0 400 450 500 550 600 650 nm 700 λ Abstrahlcharakteristik Irel = f (ϕ) Radiation Characteristic 40˚ 30˚ 20˚ 10˚ 0˚ ϕ 50˚ OHL01660 1.0 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 0 90˚ 100˚ 1.0 2002-09-18 0.8 0.6 0.4 0˚ 20˚ 6 40˚ 60˚ 80˚ 100˚ 120˚ LS A676, LA A676, LO A676, LY A676 Durchlassstrom IF = f (VF) Forward Current TA = 25 °C Relative Lichtstärke IV/IV(20 mA) = f (IF) Relative Luminous Intensity TA = 25 °C OHL00232 10 2 mA 5 OHL00233 10 1 IV I V (20 mA) IF 10 0 10 1 5 5 10 -1 5 super-red yellow orange/amber 10 0 10 -2 5 5 10 -1 1 1.4 1.8 2.2 2.6 10 -3 -1 10 3 V 3.4 5 10 0 5 10 1 VF IF Maximal zulässiger Durchlassstrom IF = f (T) Max. Permissible Forward Current Relative Lichtstärke IV/IV(25 °C) = f (TA) Relative Luminous Intensity IF = 20 mA OHL01296 35 mA 10 2 OHL00238 IV 2.0 I F mA IV (25 ˚C) 30 1.6 orange yellow amber super-red TS 25 1.2 20 15 0.8 TA 10 0 0.4 TA temp. ambient TS temp. solder point 5 0 20 40 60 0 -20 80 ˚C 100 0 20 40 60 ˚C 100 TA T 2002-09-18 orange yellow amber super-red 7 LS A676, LA A676, LO A676, LY A676 Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 °C LS, LA, LO IF Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 °C LY OHL00318 100 A IF 5 5 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 100 A OHL00316 tP tP IF D= T T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 5 5 tP D= T tP IF T 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp tp Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 °C LS, LA, LO IF 100 A 5 Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 °C LY OHL01414 t D = TP tP IF IF 100 A 5 T OHL01415 tP D= T tP IF T D= 10 -1 5 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 5 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp 2002-09-18 D= tp 8 LS A676, LA A676, LO A676, LY A676 Maßzeichnung Package Outlines 1.1 (0.043) Anode (1.4 (0.055)) (R1) 4.2 (0.165) 3.8 (0.150) 3.8 (0.150) 3.4 (0.134) (2.9 (0.114)) Cathode marking (2.85 (0.112)) 0.9 (0.035) (0.3 (0.012)) Cathode 2.54 (0.100) spacing 0.7 (0.028) 4.2 (0.165) 3.8 (0.150) 2.4 (0.094) 2.8 (0.110) (2.4 (0.094)) GPLY6880 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Kathodenkennung: abgeschrägte Ecke Cathode mark: bevelled edge Gewicht / Approx. weight: 40 mg 2002-09-18 9 LS A676, LA A676, LO A676, LY A676 Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) OHLY0597 300 ˚C T 250 240-245 ˚C 10-40 s 200 183 ˚C 120 to 180 s Ramp-down rate up to 6 K/s 150 Defined for Preconditioning: up to 6 K/s 100 Ramp-up rate up to 6 K/s 50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 t 2002-09-18 10 s 250 LS A676, LA A676, LO A676, LY A676 Wellenlöten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskühlung forced cooling 0 0 50 100 150 200 t 2002-09-18 11 s 250 LS A676, LA A676, LO A676, LY A676 Empfohlenes Lötpaddesign Recommended Solder Pad Wellenlöten (TTW) TTW Soldering 4.5 (0.177) 4.2 (0.165) 1.7 (0.067) Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation Pick up Area Lötstopplack Solder resist Cu Fläche > 16 mm 2 per pad Cu-area OHPY1302 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2002-09-18 12 LS A676, LA A676, LO A676, LY A676 Empfohlenes Lötpaddesign Recommended Solder Pad IR Reflow Löten IR Reflow Soldering 3.0 (0.118) 3.7 (0.146) 1.2 (0.047) Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation Cu-Fläche > 16 mm 2 Cu-area > 16 mm 2 Lötstopplack Solder resist OHLPY965 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gurtung / Polarität und Lage Verpackungseinheit 2000/Rolle, ø330 mm Method of Taping / Polarity and Orientation Packing unit 2000/reel, ø330 mm 4 (0.157) 4.25 (0.167) 8 (0.315) 12 (0.472) 1.75 (0.069) 5.5 (0.217) 2 (0.079) 3.95 (0.156) 1.5 (0.059) C Cathode identification OHAY2273 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2002-09-18 A 13 LS A676, LA A676, LO A676, LY A676 Revision History: 2002-09-18 Previous Version: Date of change 2002-08-19 Page Subjects (major changes since last revision) 12 recommended solder pad (TTW soldering) 4 value (wavelength amber/yellow 5 wavelength groups 2 wavelength grouping for yellow and orange 14 annotations 2002-07-25 4 value (TCλdom from 0.04 to 0.05 nm/K) 2002-07-25 13 recommended solder pad (IR reflow soldering) 2002-08-01 3, 4 value (reverse voltage from 3 V to 12 V) 2002-09-18 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. All typical data and graphs are basing on representative samples, but don’t represent the production range. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2002-09-18 14