● ● ● ● ● Features Unregulated Converters ● ● Fully RoHS 6/6 Conform Full Power at 100°C Ambient Temperature 1kVDC or 3kVDC Isolation Options UL /CSA Certified, CB Report Suitable for Fully Automated Assembly (including Vapour Phase Soldering) Optional Continuous Short Circuit Protection Efficiency to 84% Selection Guide Part Number SMD (3kV) Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency Capacitive Load (%) (max.) R1S**-xx3.3 (H) 3.3, 5, 12, 15, 24 3.3 303 75 33µF R1S**-xx05 (H) 3.3, 5, 12, 15, 24 5 200 72-78 33µF R1S**-xx09 (H) 3.3, 5, 12, 15, 24 9 111 74-78 22µF R1S**-xx12 (H) 3.3, 5, 12, 15, 24 12 84 75-80 22µF R1S**-xx15 (H) 3.3, 5, 12, 15, 24 15 66 75-82 10µF R1S**-xx24 (H) 3.3, 5, 12, 15, 24 24 42 74-84 10µF R1D**-xx3.3 (H) 3.3, 5, 12, 15, 24 ±3.3 ±152 75 ±10µF R1D**-xx05 (H) 3.3, 5, 12, 15, 24 ±5 ±100 72-78 ±10µF R1D**-xx09 (H) 3.3, 5, 12, 15, 24 ±9 ±56 74-78 ±6.8µF R1D**-xx12 (H) 3.3, 5, 12, 15, 24 ±12 ±42 75-80 ±6.8µF R1D**-xx15 (H) 3.3, 5, 12, 15, 24 ±15 ±33 75-82 ±4.7µF R1D**-xx24 (H) 3.3, 5, 12, 15, 24 ±24 ±21 74-84 ±4.7µF R1S-R1D xx = Input Voltage (other input and output voltage combinations available on request) * add Suffix “H” for 3kV Isolation, e.g. R1S-0505/H, R1D-0505/H, R1S12-0505/H, R1D12-0505/H * add Suffix “P” for Continuous Short Circuit Protection, e.g. R1S8-0505/P, R1S-0505/HP, R1D12-0505/HP * add suffix -R for tape & reel packing e.g. R1S-0505-R. For more details see Application Notes. Case and Pinning Options (note restrictions on /H option) R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option) ** with marking 8 denotes 8 pins out of 8 fitted (/H option not available) ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option) ** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available) ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy ±2% typ., ±5% max. Line Voltage Regulation Load Voltage Regulation (10% to 100% full load) All Variants 3.3V output types 5V output type 9V output type 12V, 15V, 24V output types Output Ripple and Noise (20MHz BW limited) Operating Frequency Efficiency at Full Load No Load Power Consumption 50mVp-p typ., 100mVp-p max. 20kHz min. / 60kHz typ. / 100kHz max. R1S** types R1D** types Isolation Voltage H-Suffix Rated Working Voltage Isolation Capacitance 1.2%/1% of Vin typ. 15% typ., 20% max. 12% typ., 15% max. 7% typ., 10% max. 6% typ., 10% max. See Selection Guide 101mW min. / 126mW typ. / 220mW max. 87mW min. / 130mW typ. / 230mW max. (tested for 1 second) 1000VDC min. (tested for 1 second) 3000VDC min. (long term isolation) see Application Notes R1S, R1S8, R1D, R1D10 15pF min. / 70pF max. R1S12, R1D12 10pF min. / 75pF max. Isolation Resistance Short Circuit Protection P-Suffix E-6 10 GΩ min. 1 Second Continuous REV: 0/2010 ECONOLINE DC/DC-Converter 1 Watt SMD Single & Dual Output RoHS 2002/95/EC 6/6 E-224736 UL-60950-1 Certified R1S_R1D Description The R1S and R1D converters are of the enclosed open frame type, i.e. they are not potted. The converters are typically used in general purpose and industrial low power isolation and voltage matching applications where an SMD converter is required. The converter series feature an extended ambient temperature operating range of -40°C ~ +100°C without derating and optional continuous short circuit protection. In addition to two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with automatic insertion machines. Refer to Application Notes www.recom-electronic.com R1S_R1D Series ECONOLINE DC/DC-Converter Specifications - continued Operating Temperature Range (free air convection) Storage Temperature Range Reflow Temperature Vapour Phase Process -40°C to +100°C (see Graph) -55°C to +125°C ROHS compliant 245°C (30 sec), Peak 255°C (5 sec) max. (for more details see Application Notes) 230°C (90 sec) max. Relative Humidity R1S-0505, R1D-0505 1000 hrs / 90% humidity / +85°C ambient 100 1.0g (R1S), 1.2g (R1D) 40 pcs per Tube 33 pcs per tube 500 pcs per Reel 80 R1S, R1S8 R1S12, R1D All Types Detailed Information see Application Notes chapter "MTBF" (+85°C) Certifications CB Test Report Report: US/14402/UL UL General Safety Report: E322406 CUL General Safety using MIL-HDBK 217F 1045 x 103 hours using MIL-HDBK 217F 183 x 103 hours 60 Output Power (%) Package weight Packing Quantity } (Ambient Temperature) 95% RH Humidity Susceptibility Test MTBF (+25°C) Derating-Graphs Safe Operating Area 40 20 0 -40 0 50 100 110 Operating Temperature °C UL 60950-1 1st Ed. C22.2 No. 60950-1-03 150 R1S12-0505, R1D12-0505 100 Tolerance Envelope 80 Typical L o +5% ad Line V Nom. Output Power (%) +10% +5% 1% 10% 50% 100% Output Load Current (%) 0 Safe Operating Area -40 0 50 150 100 115 Operating Temperature °C The derating graphs are valid only for the shown part numbers. The converters have been tested at full load with 100°C ambient temperature and all internal component temperatures are within limits. However, Recom can only guarantee continuous operation of up to +85°C to maintain the validity of the UL certificates. Typical Characteristics R1S**-xx05 R1D**-xx05 Efficiency / Load Efficiency / Load 100 100 1205 3.305 80 80 0505 40 Efficiency % Efficiency % 40 20 0% 20% 40% 60% Total Output current (%) 80% 0 Deviation / Load 0% 20% 40% 60% Total Output current (%) 80% 100% 80% 100% Deviation / Load 25.000 20.000 20.000 3.305 15.000 Deviation from Nominal (%) Deviation from Nominal (%) 3.305 20 100% 25.000 0505 10.000 5.000 0.000 1205 -5.000 -10.000 1205 60 60 0 0505 0% 20% 40% 60% Total Output current (%) www.recom-international.com 80% 100% REV:0/2010 15.000 3.305 0505 10.000 5.000 0.000 -5.000 -10.000 1205 0% 20% 40% 60% Total Output current (%) E-7 R1S-R1D Output Voltage 5% 60 40 30 20 R1S_R1D Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) Note: /H option is available in these pin packages 5 PIN Single SMD Package 12.75 15.24 10.7 8 6.7 10 5 RECOM R1S-xxxx xxxx 7.0 2.54 x 3 3rd angle projection 6 PIN Dual SMD Package 7 RECOM R1D-xxxx xxxx 4 1 2 8.50 11.10 10.7 1 2 7.0 6.7 4 5 2.54x4 8.50 11.10 Pin Connections Recommended Footprint Details Pin # 0.50 Bottom View 2.54 8 5 1 2 4 Top View 12.00 1.20 1.80 Single Dual 1 –Vin –Vin 2 +Vin +Vin 4 –Vout Com 5 +Vout –Vout 7 No Pin +Vout 8 NC No Pin 10 No Pin NC Recommended Footprint Details 0.50 12.00 Bottom View 2.54 10 7 Top View 1 2 4 5 1.80 1.20 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm R1S-R1D 8 PIN Single SMD Package 12.75 6.7 Note: /H option is not available in these pin packages 15.24 10.7 7.0 2.54 x 3 3rd angle projection 10 PIN Dual SMD Package 8.50 11.10 8 7 6 5 10 9 8 7 6 RECOM R1S8-xxxx xxxx RECOM R1D10-xxxx xxxx 1 2 3 4 1 2 3 4 5 10.7 7.0 6.7 2.54x4 8.50 11.10 Pin Connections Pin # Recommended Footprint Details 0.50 Bottom View 2.54 12.00 Single Dual 1 –Vin –Vin 2 +Vin +Vin 3 NC NC 8 7 6 5 4 –Vout Com 1 2 3 4 5 +Vout –Vout 6 NC NC 7 NC +Vout 8 NC NC 9 - NC 10 - NC 1.20 Top View 1.80 Recommended Footprint Details 0.50 Bottom View 2.54 12.00 10 9 8 7 6 1.20 Top View 1 2 3 4 5 1.80 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option) ** with marking 8 denotes 8 pins out of 8 fitted (/H option not available) e.g. R1S-0505, R1S-0505/H, R1S-0505/HP e.g. R1S8-0505, R1S8-0505/P R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option) ** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available) e.g. R1D-0505, R1D-0505/H, R1D-0505/HP e.g. R1D10-0505, R1D10-0505/P E-8 REV: 0/2010 www.recom-electronic.com R1S_R1D Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) 10.7 15.24 12 11 10 8 7 RECOM R1S_R1D12-xxxx xxxx 5 6 1 2 3 3rd angle projection Note: /H option is available in this pin package 12 PIN Single and Dual SMD Package Pin Connections 6.7 Pin # 7.0 8.50 11.10 2.54x5 Recommended Footprint Details Separation > 3.8 mm 0.55 Bottom View Single Dual 1 –Vin –Vin 2 +Vin +Vin 3 NC NC 5 –Vout Com 6 NC –Vout 7 NC NC 8 +Vout +Vout 10 NC NC 11 NC NC 12 NC NC NC = No Connection 12.00 12 1110 8 7 1 2 3 5 6 Top View 1.20 R1S** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) R1D** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) XX.X ± 0.5 mm XX.XX ± 0.25 mm 1.80 e.g. R1S12-0505, R1S12-0505/H, R1S12-0505/HP e.g. R1D12-0505, R1D12-0505/H, R1D12-0505/HP R1S-R1D EMC Filtering - Suggestion for EN55022 Class B (Conducted and Emitted) 470pF/4kVDC 3.3µH Input + Output 3.3µF 470pF/4kVDC +Vout 3.3µH Input + Com 3.3µF -Vout www.recom-international.com REV:0/2010 E-9