Features Unregulated Converters ● ● ● ● ● ● ● ● Fully RoHS 6/6 Conform Full Power at 100°C Ambient Temperature 1kVDC or 3kVDC Isolation Options UL /CSA Certified, CB Report Suitable for Fully Automated Assembly (including Vapour Phase Soldering) Optional Continuous Short Circuit Protection Efficiency to 84% Built-In EN55022 Class A Filter Selection Guide Part Number SMD (3kV) Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) R1S**-xx3.3 (H) 3.3, 5, 12, 15, 24 3.3 R1S**-xx05 (H) 3.3, 5, 12, 15, 24 5 R1S**-xx09 (H) 3.3, 5, 12, 15, 24 R1S**-xx12 (H) R1S**-xx15 (H) R1S**-xx24 Efficiency (%) Max Capacitive Load(1) 303 75 2200µF 200 72-78 1000µF 9 111 74-78 1000µF 3.3, 5, 12, 15, 24 12 84 75-80 470µF 3.3, 5, 12, 15, 24 15 66 75-82 470µF (H) 3.3, 5, 12, 15, 24 24 42 74-84 220µF R1D**-xx3.3 (H) 3.3, 5, 12, 15, 24 ±3.3 ±152 75 ±1000µF R1D**-xx05 (H) 3.3, 5, 12, 15, 24 ±5 ±100 72-78 ±470µF R1D**-xx09 (H) 3.3, 5, 12, 15, 24 ±9 ±56 74-78 ±470µF R1D**-xx12 (H) 3.3, 5, 12, 15, 24 ±12 ±42 75-80 ±220µF R1D**-xx15 (H) 3.3, 5, 12, 15, 24 ±15 ±33 75-82 ±220µF R1D**-xx24 (H) 3.3, 5, 12, 15, 24 ±24 ±21 74-84 ±100µF xx = Input Voltage (other input and output voltage combinations available on request) * add Suffix “H” for 3kV Isolation, e.g. R1S-0505/H, R1D-0505/H, R1S12-0505/H, R1D12-0505/H * add Suffix “P” for Continuous Short Circuit Protection, e.g. R1S8-0505/P, R1S-0505/HP, R1D12-0505/HP * add suffix -R for tape & reel packing e.g. R1S-0505-R. For more details see Application Notes. ECONOLINE DC/DC-Converter with 3 year Warranty 1 Watt SMD Single & Dual Output RoHS 2011/65/EU 6/6 E358085 UL-60950-1 Certified EN-60950-1 Certified EN-60601-1 Certified* (*/H suffix) R1S_R1D Case and Pinning Options (note restrictions on /H option) R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option) ** with marking 8 denotes 8 pins out of 8 fitted (/H option not available) ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) Description R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option) ** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available) ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation Load Voltage Regulation (10% to 100% full load) Output Ripple and Noise (20MHz BW limited) Operating Frequency Efficiency at Full Load Minimum Load = 0% E-24 ±2% typ., ±5% max. All Variants 3.3V output types 5V output type 9V output type 12V, 15V, 24V output types 1.2%/1% of Vin typ. 15% typ., 20% max. 12% typ., 15% max. 7% typ., 10% max. 6% typ., 10% max. 50mVp-p typ., 100mVp-p max. 20kHz min. / 60kHz typ. / 100kHz max. See Selection Guide Specifications valid for 10% minimum load only. cont. REV: 1/2013 The R1S and R1D converters are of the enclosed open frame type, i.e. they are not potted. The converters are typically used in general purpose and industrial low power isolation and voltage matching applications where an SMD converter is required. The converter series feature an extended ambient temperature operating range of -40°C ~ +100°C without derating and optional continuous short circuit protection. In addition to two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with automatic insertion machines. Refer to Application Notes www.recom-electronic.com R1S_R1D Series ECONOLINE DC/DC-Converter Specifications - continued (tested for 1 second) (rated for 1 minute) (tested for 1 second) (rated for 1 minute) R1S, R1S8, R1D, R1D10 R1S12, R1D12 1000VDC 500VAC / 60Hz Isolation Voltage H-Suffix 3000VDC H-Suffix 1500VAC / 60Hz Isolation Capacitance 15pF min. / 70pF max. 10pF min. / 75pF max. Isolation Resistance 10 GΩ min. Short Circuit Protection 1 Second P-Suffix Continuous Operating Temperature Range (free air convection) -40°C to +100°C (see Graph) Storage Temperature Range -55°C to +125°C Reflow Temperature ROHS compliant 245°C (30 sec), Peak 255°C (5 sec) max. Vapour Phase Process (for more details see Application Notes) 230°C (90 sec) max. Relative Humidity 95% RH Humidity Susceptibility Test 1000 hrs / 90% humidity / +85°C ambient Package weight R1S 1.0g R1S8 1.1g R1S12, R1D, R1D10, R1D12 1.2g Packing Quantity R1S, R1S8 40 pcs per Tube R1S12, R1D, R1D10, R1D12 33 pcs per tube All Types 500 pcs per Reel MTBF (+25°C) Detailed Information see using MIL-HDBK 217F 4275 x 103 hours Application Notes chapter "MTBF" (+85°C) using MIL-HDBK 217F 1365 x 103 hours CERTIFICATIONS CB Test Report Report: US/14402A/UL IEC 60950-1:2001 1st Ed. UL General Safety Report: E358085 UL 60950-1 2nd Ed. CUL General Safety C22.2 No. 60950-1-03 EN Medical Safety Report: MDD1205098-2 + RM1205098-2 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment EN General Safety Report: SPCLVD1211033-3 EN60950-1: 2006 + A12:2011 Conducted / Radiated Emissions EN55022 Level A Notes Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under . 1 second without damage to the converter. Derating-Graphs (Ambient Temperature) R1S-0505, R1D-0505 100 80 Output Power (%) Isolation Voltage 60 Safe Operating Area 40 20 0 -40 0 50 150 100 105 Operating Temperature °C } R1S-R1D The derating graphs are valid only for the part numbers shown. Typical Characteristics R1S**-xx05 Efficiency / Load Tolerance Envelope +5% 60 1% 40 10% 50% 80 0% 20% 40% 60% Total Output current (%) 80% 100% Deviation from Nominal (%) 20.000 15.000 0 20.000 3.305 0505 5.000 -5.000 -10.000 0% 20% 40% 60% Total Output current (%) 80% 100% 80% 100% 25.000 10.000 0.000 3.305 20 Deviation / Load 25.000 Output Load Current (%) 1205 40 20 0 0505 60 0505 Deviation / Load 100% www.recom-international.com 1205 3.305 Deviation from Nominal (%) Output Voltage 5% Efficiency % V Nom. ad Line 100 Efficiency % 80 Typical L o Efficiency / Load 100 +10% +5% R1D**-xx05 1205 0% 20% 40% 60% Total Output current (%) 80% REV: 1/2013 100% 15.000 3.305 0505 10.000 5.000 0.000 -5.000 -10.000 1205 0% 20% 40% 60% Total Output current (%) E-25 R1S_R1D Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) Note: /H option is available in these pin packages 5 PIN Single SMD Package 12.75 15.24 10.7 8 6.7 10 5 RECOM R1S-xxxx xxxx 7.0 2.54 x 3 3rd angle projection 6 PIN Dual SMD Package 7 RECOM R1D-xxxx xxxx 4 1 2 8.50 11.10 10.7 1 2 7.0 6.7 4 5 2.54x4 8.50 11.10 Pin Connections Recommended Footprint Details Pin # 0.50 Bottom View 2.54 8 5 1 2 4 Top View 12.00 1.20 1.80 Single Dual 1 –Vin –Vin 2 +Vin +Vin 4 –Vout Com 5 +Vout –Vout 7 No Pin +Vout 8 NC No Pin 10 No Pin NC Recommended Footprint Details 0.50 12.00 Bottom View 2.54 10 7 Top View 1 2 4 5 1.80 1.20 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm R1S-R1D 8 PIN Single SMD Package 12.75 6.7 Note: /H option is not available in these pin packages 15.24 10.7 7.0 2.54 x 3 3rd angle projection 10 PIN Dual SMD Package 8.50 11.10 8 7 6 5 10 9 8 7 6 RECOM R1S8-xxxx xxxx RECOM R1D10-xxxx xxxx 1 2 3 4 1 2 3 4 5 10.7 7.0 6.7 2.54x4 8.50 11.10 Pin Connections Recommended Footprint Details 0.50 Bottom View 2.54 12.00 Pin # Single Dual 1 –Vin –Vin D(isol) –Vin 2 +Vin +Vin +Vin 3 NC NC - 8 7 6 5 4 –Vout Com –Vout1 1 2 3 4 5 +Vout –Vout +Vout1 6 NC NC –Vout2 7 NC +Vout +Vout2 8 NC NC - 9 - NC - 10 - NC NC 1.20 Top View 1.80 Recommended Footprint Details 0.50 Bottom View 2.54 12.00 10 9 8 7 6 1.20 Top View 1 2 3 4 5 1.80 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option) ** with marking 8 denotes 8 pins out of 8 fitted (/H option not available) e.g. R1S-0505, R1S-0505/H, R1S-0505/HP e.g. R1S8-0505, R1S8-0505/P R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option) ** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available) e.g. R1D-0505, R1D-0505/H, R1D-0505/HP e.g. R1D10-0505, R1D10-0505/P E-26 REV: 1/2013 www.recom-electronic.com R1S_R1D Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) 10.7 15.24 12 11 10 8 7 RECOM R1S_R1D12-xxxx xxxx 5 6 1 2 3 3rd angle projection Note: /H option is available in this pin package 12 PIN Single and Dual SMD Package Pin Connections 6.7 Pin # 7.0 8.50 11.10 2.54x5 Recommended Footprint Details Separation > 3.8 mm 0.55 Bottom View Single Dual 1 –Vin –Vin 2 +Vin +Vin 3 NC NC 5 –Vout Com 6 NC –Vout 7 NC NC 8 +Vout +Vout 10 NC NC 11 NC NC 12 NC NC NC = No Connection 12.00 12 1110 8 7 1 2 3 5 6 Top View 1.20 R1S** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) R1D** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option) XX.X ± 0.5 mm XX.XX ± 0.25 mm 1.80 e.g. R1S12-0505, R1S12-0505/H, R1S12-0505/HP e.g. R1D12-0505, R1D12-0505/H, R1D12-0505/HP R1S-R1D EMC Filtering - Suggestion for EN55022 Class B (Conducted and Emitted) 470pF/4kVDC L1 Input + DC Output C1 DC 470pF/4kVDC +Vout L1 Input + DC C1 DC www.recom-international.com Com -Vout REV: 1/2013 Standard and /H versions C1 L1 Vin 4.7µF 3.3µH 3.3V 2.2µF 4.7µH 5V 2.2µF 10µH 9V 2.2µF 10µH 12V 2.2µF 22µH 15V 4.7µF 22µH 24V /P and /HP versions C1 L1 Vin 4.7µF 10µH 3.3V 10µF 10µH 5V 4.7µF 22µH 9V 4.7µF 22µH 12V 4.7µF 22µH 15V 10µF 47µH 24V C1 = MLCC L1 = SMD Inductor E-27