2Way Power Divider PD26T2 Product Features Application • Passive Integration on Silicon • Low Insertion Loss • High Isolation • Solder Pad • Good Balance • Low Cost • Repeater • Base Station • RF Sub-Systems Package : SOT-23-6L Description The 2 way power divider is low loss, high isolation, good matching, and phase / amplitude. The PD26T2 is a monolithic two-way in phase hybrid junction tuned for the 2500~2700MHz band. Specifications at 25℃ PARAMETER Units Min Frequency Range MHz 2500 Insertion Loss dB Input Return Loss dB 14 16 Output Return Loss dB 14 16 Isolation dB 17 19 Phase difference Deg. 1 3 Amplitude difference dB 0.1 0.3 Remarks MHz 2600 Block Diagram & Pin Out Output_1 Input Typ Max 2700 0.4 0.6 Absolute Maximum Ratings Parameter Value Input Power 1W Output_2 Operating Temperature Storage Temperature -40 ~ +85℃ -65 ~ + 150℃ ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 1.4 2Way Power Divider PD26T2 Typical Performance Data at 25℃ (SOT23-6L Package) Insertion Loss vs. Frequency Input Return Loss vs. Frequency -3.0 0 Input Return Loss(dB) Insertion(dB) -3.2 -3.4 -3.6 -3.8 -4.0 -5 -10 -15 -20 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.40 2.45 2.50 Freq(GHz) Output Return Loss vs. Frequency 2.60 2.65 2.70 2.65 2.70 Isolation vs. Frequency 0 0 -5 -5 Isolation(dB) Output Return Loss(dB) 2.55 Freq(GHz) -10 -15 -10 -15 -20 -20 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.40 2.45 2.50 Freq(GHz) 2.55 2.60 Freq(GHz) Package Dimensions (Type: SOT23-6L) RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 1.4