Ordering number:EN1800E NPN Triple Diffused Planar Silicon Transistor 2SC3675 900V/100mA High-Voltage Amplifier High-Voltage Switching Applications Applications Package Dimensions · High voltage amplifiers. · High-voltage switching applications. · Dynamic focus applications. unit:mm 2010C [2SC3675] Features · High breakdown voltage (VCEO min=900V). · Small Cob (Cob typ=2.8pF). · Wide ASO (Adoption of MBIT process). · High reliability (Adoption of HVP process). 1 : Base 2 : Collector 3 : Emitter JEDEC : TO-220AB EIAJ : SC46 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 1500 V Collector-to-Emitter Voltage VCEO VEBO 900 V IC 100 mA 300 mA 10 W 150 ˚C –55 to +150 ˚C Emitter-to-Base Voltage Collector Current Collector Current (Pulse) ICP Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg 5 Tc=25˚C V Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Ratings min typ Unit max Collector Cutoff Current ICBO VCB=900V, IE=0 10 µA Emitter Cutoff Current IEBO 10 µA DC Current Gain hFE fT VEB=4V, IC=0 VCE=5V, IC=10mA Gain-Bandwidth Product 30 VCE=10V, IC=10mA 6 MHz Collector-to-Emitter Saturation Voltage VCE(sat) IC=20mA, IB=4mA 5 V Base-to-Emitter Saturation Voltage VBE(sat) IC=20mA, IB=4mA 2 V Collector-to-Base Breakdown Voltage V(BR)CBO IC=1mA, IE=0 Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=1mA, RBE=∞ Emitter-to-Base Breakdown Voltage V(BR)EBO Cob Output Capacitance IE=1mA, IC=0 VCB=100V, f=1MHz 1500 V 900 V 5 V 2.8 pF Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N2098HA (KT)/80796TS (KOTO) 8-9202/4237AT/3195KI, TS No.1800–1/3 2SC3675 No.1800–2/3 2SC3675 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 1998. Specifications and information herein are subject to change without notice. PS No.1800–3/3