ETC 2SC4660

Ordering number:EN4692
NPN Epitaxial Planar Silicon Transistor
2SC4660
High-Definition CRT Display
Video Output Driver Applications
Features
Package Dimensions
· High fT (fT=2.2GHz typ)
· Large current (IC=300mA)
· Adoption of FBET process.
unit:mm
2042B
[2SC4660]
3.3
1.5
7.5
3.0
11.0
1.0
4.0
1.0
1.4
8.0
15.5
3.0
1.6
0.8
0.8
0.7
0.75
1.7
2.4
1 : Emitter
2 : Collector
3 : Base
SANYO : TO-126ML
4.8
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
30
V
Collector-to-Emitter Voltage
VCEO
VEBO
20
V
IC
300
mA
Collector Current (Pulse)
ICP
600
mA
Collector Dissipation
PC
1.3
W
Emitter-to-Base Voltage
Collector Current
3
5
W
150
˚C
–55 to +150
˚C
Tc=25˚C
Junction Temperature
Tj
Storage Temperature
Tstg
V
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
min
typ
max
Unit
Collector Cutoff Current
ICBO
VCB=20V, IE=0
0.1
µA
Emitter Cutoff Current
IEBO
5.0
µA
DC Current Gain
hFE1
hFE2
VEB=2V, IC=0
VCE=5V, IC=50mA
Gain-Bandwidth Product
fT
VCE=5V, IC=300mA
VCE=5V, IC=50mA
40
200
20
2.2
GHz
* : The 2SC4660 is classified by 50mA hFE as follows :
40
C
80
60
D
120
100
E
200
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
12099HA (KT)/90794MT (KOTO) BX-0553 No.4692–1/3
2SC4660
Parameter
Symbol
Conditions
Ratings
min
typ
max
Unit
Output Capacitance
Cob
VCB=10V, f=1MHz
3.9
Reverse Transfer Capacitance
Cre
VCB=10V, f=1MHz
3.2
IC=100mA, IB=10mA
0.2
0.6
V
IC=100mA, IB=10mA
0.9
1.2
V
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
VCE(sat)
VBE(sat)
pF
pF
No.4692–2/3
2SC4660
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of January, 1999. Specifications and information herein are subject
to change without notice.
PS No.4692–3/3