DB201S ~ DB207S VOLTAGE 50 V ~ 1000 V 2.0 Amp Surface Mount Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free DB-1S FEATURES Low forward voltage drop, high current capability Rating to 1000V PRV Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique results in inexpensive products Lead tin Pb / Sn copper The plastic material has UL flammability classification 94V-0 - A + B D E ~ J ~ C L MECHANICAL DATA F Polarity: As marked on Body Weight:0.02 ounces, 0.38 grams Mounting position: Any REF. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS A B C D E M Millimeter Min. Max. 8.20 8.80 10.0 10.3 7.80 8.50 3.15 3.40 6.20 6.50 REF. F J L M Millimeter Min. Max. 5.00 5.20 0.95 1.20 0.20 0.35 1.40 1.60 Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%. PARAMETERS SYMBOL Peak Repetitive Peak Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Maximum Average Forward Rectified Current @TA=40℃ VRRM VRMS VDC DB DB DB DB DB DB DB 201S 202S 203S 204S 205S 206S 207S 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 UNIT V I(AV) 2.0 A IFSM 60 A VF 1.1 10 500 10.4 25 40 -55 ~ 150 V Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 1.5 A DC Maximum DC Reverse Current @TJ=25℃ at Rated DC Blocking Voltage @TJ=125℃ 2 I t Rating for Fusing (t<8.3ms) Typical Junction Capacitance Per Element (Note1) Typical Thermal Resistance (Note2) IR I2t CJ RθJA TJ, TSTG Operating and Storage temperature range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC 2. Thermal resistance from junction to ambient mounted on P.C.B. with 0.5*0.5"(13*13mm) copper pads. 01-Sep-2010 Rev. B uA A2s pF ℃/W ℃ Page 1 of 2 DB201S ~ DB207S VOLTAGE 50 V ~ 1000 V 2.0 Amp Surface Mount Bridge Rectifiers Elektronische Bauelemente RATINGS AND CHARACTERISTIC CURVES FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES 2.0 FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 100 50 60 50 40 30 T A=25 oC SINGLE SINE-WAVE JEDEC METHOD 20 10 0 10 1 150 FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 100 10 INSTANTANEOUS FORWARD CURRENT,(A) CAPACITANCE(pF) 100 NUMBER OF CYCLES AT 60HZ AMBIENT TEMPERATURE , 10 TJ=25 oC,f=1MHZ 1.0 1.0 0.1 T J=25 oC PULSE WIDTH:300us 2% DUTY CYCLE 0.01 0.1 1.0 4.0 10.0 100 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT,(uA) 100 T J=125 oC 10 1.0 T J=25 oC 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 01-Sep-2010 Rev. B Page 2 of 2