74VHC08 Quad 2-Input AND Gate Features General Description ■ High Speed: tPD = 4.3ns (Typ.) at TA = 25°C ■ High noise immunity: VNIH = VNIL = 28% VCC (Min.) The VHC08 is an advanced high speed CMOS 2 Input AND Gate fabricated with silicon gate CMOS technology. It achieves the high-speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. ■ Power down protection is provided on all inputs ■ Low power dissipation: ICC = 2µA (Max.) @ TA = 25°C ■ Low noise: VOLP = 0.8V (Max.) ■ Pin and function compatible with 74HC08 The internal circuit is composed of 4 stages including buffer output, which provide high noise immunity and stable output. An input protection circuit insures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery backup. This circuit prevents device destruction due to mismatched supply and input voltages. Ordering Information Order Number Package Number Package Description 74VHC08M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VHC08SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74VHC08MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 www.fairchildsemi.com 74VHC08 — Quad 2-Input AND Gate December 2007 74VHC08 — Quad 2-Input AND Gate Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names Truth Table Description An, Bn Inputs A B O On Outputs L L L L H L ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 H L L H H H www.fairchildsemi.com 2 Symbol Parameter Rating VCC Supply Voltage –0.5V to +7.0V VIN DC Input Voltage –0.5V to +7.0V VOUT DC Output Voltage –0.5V to VCC + 0.5V IIK Input Diode Current –20mA IOK Output Diode Current ±20mA IOUT DC Output Current ±25mA ICC DC VCC / GND Current TSTG TL ±50mA Storage Temperature –65°C to +150°C Lead Temperature (Soldering, 10 seconds) 260°C Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter VCC Supply Voltage VIN Input Voltage VOUT Output Voltage TOPR Operating Temperature tr , tf Rating 2.0V to +5.5V 0V to +5.5V 0V to VCC –40°C to +85°C Input Rise and Fall Time, VCC = 3.3V ± 0.3V 0ns/V ∼ 100ns/V VCC = 5.0V ± 0.5V 0ns/V ∼ 20ns/V Note: 1. Unused inputs must be held HIGH or LOW. They may not float. ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 www.fairchildsemi.com 3 74VHC08 — Quad 2-Input AND Gate Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = –40°C to +85°C TA = 25°C Symbol Parameter VCC (V) VIH HIGH Level Input Voltage 2.0 Conditions Min. 1.50 3.0–5.5 0.7 x VCC VIL LOW Level Input Voltage VOH HIGH Level Output Voltage 3.0 LOW Level Output Voltage Min. IOH = –50µA 2.0 1.9 2.9 3.0 2.9 4.4 4.5 4.4 IOH = –4mA 2.58 2.48 IOH = –8mA 3.94 3.80 VIN = VIH or VIL IOL = 50µA 4.5 3.0 4.5 IOL = 8mA V 0.0 0.1 0.1 0.0 0.1 0.1 0.0 IOL = 4mA V 0.3 x VCC 1.9 4.5 3.0 V 0.50 0.3 x VCC VIN = VIH or VIL Units 0.7 x VCC 3.0 2.0 Max. 0.50 3.0–5.5 2.0 Max. 1.50 2.0 4.5 VOL Typ. 0.1 0.1 0.36 0.44 V 0.36 0.44 IIN Input Leakage Current 0–5.5 VIN = 5.5V or GND ±0.1 ±1.0 µA ICC Quiescent Supply Current 5.5 VIN = VCC or GND 2.0 20.0 µA Noise Characteristics TA = 25°C Symbol Parameter VCC (V) Conditions Typ. Limits Units Quiet Output Maximum Dynamic VOL 5.0 CL = 50pF 0.3 0.8 V VOLV(2) Quiet Output Minimum Dynamic VOL 5.0 CL = 50pF –0.3 –0.8 V VIHD(2) Minimum HIGH Level Dynamic Input Voltage 5.0 CL = 50pF 3.5 V VILD2) Maximum LOW Level Dynamic Input Voltage 5.0 CL = 50pF 1.5 V VOLP (2) Note: 2. Parameter guaranteed by design. ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 www.fairchildsemi.com 4 74VHC08 — Quad 2-Input AND Gate DC Electrical Characteristics TA = –40°C to +85°C TA = 25°C Symbol tPHL, tPLH Parameter Propagation Delay VCC (V) 3.3 ± 0.3 5.0 ± 0.5 CIN Input Capacitance CPD Power Dissipation Capacitance Conditions Typ. Max. Min. Max. Units CL = 15pF 6.2 8.8 1.0 10.5 ns CL = 50pF 8.7 12.3 1.0 14.0 CL = 15pF 4.3 5.9 1.0 7.0 CL = 50pF 5.8 7.9 1.0 9.0 4 10 VCC (3) = Open Min. ns 10 pF 18 pF Note: 3. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) = CPD • VCC • fIN + ICC / 4 (per gate). ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 www.fairchildsemi.com 5 74VHC08 — Quad 2-Input AND Gate AC Electrical Characteristics 8.75 8.50 0.65 A 7.62 14 8 B 5.60 4.00 3.80 6.00 PIN ONE INDICATOR 1 1.70 7 0.51 0.35 1.27 0.25 1.27 LAND PATTERN RECOMMENDATION M C B A (0.33) 1.75 MAX 1.50 1.25 SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD GAGE PLANE FLASH OR BURRS. D) LANDPATTERN STANDARD: SOIC127P600X145-14M 0.36 E) DRAWING CONFORMS TO ASME Y14.5M-1994 F) DRAWING FILE NAME: M14AREV13 0.50 X 45° 0.25 R0.10 R0.10 8° 0° 0.90 0.50 (1.04) SEATING PLANE DETAIL A SCALE: 20:1 Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 www.fairchildsemi.com 6 74VHC08 — Quad 2-Input AND Gate Physical Dimensions 74VHC08 — Quad 2-Input AND Gate Physical Dimensions (Continued) Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 www.fairchildsemi.com 7 74VHC08 — Quad 2-Input AND Gate Physical Dimensions (Continued) 0.65 0.43 TYP 1.65 6.10 0.45 12.00° TOP & BOTTOM R0.09 min A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 1982 E. LANDPATTERN STANDARD: SOP65P640X110-14M F. DRAWING FILE NAME: MTC14REV6 1.00 R0.09min Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 www.fairchildsemi.com 8 ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EZSWITCH™ * ™ PDP-SPM™ SyncFET™ ® Power220® ® Power247 The Power Franchise® POWEREDGE® Power-SPM™ PowerTrench® TinyBoost™ Programmable Active Droop™ TinyBuck™ ® QFET TinyLogic® QS™ TINYOPTO™ QT Optoelectronics™ TinyPower™ ® Quiet Series™ TinyPWM™ RapidConfigure™ TinyWire™ Fairchild® SMART START™ Fairchild Semiconductor® µSerDes™ ® SPM FACT Quiet Series™ UHC® STEALTH™ FACT® Ultra FRFET™ SuperFET™ FAST® UniFET™ SuperSOT™-3 FastvCore™ VCX™ ® ®* SuperSOT™-6 FlashWriter SuperSOT™-8 * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I32 ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.4.0 www.fairchildsemi.com 9 74VHC08 — Quad 2-Input AND Gate TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.