CERAMIC CHIP CAPACITORS FEATURES • C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics • 10, 16, 25, 50, 100 and 200 Volts • Standard End Metalization: Tin-plate over nickel barrier • Available Capacitance Tolerances: ±0.10 pF; ±0.25 pF; ±0.5 pF; ±1%; ±2%; ±5%; ±10%; ±20%; and +80%-20% • Tape and reel packaging per EIA481-1. (See page 92 for specific tape and reel information.) Bulk Cassette packaging (0402, 0603, 0805 only) per IEC60286-6 and EIAJ 7201. • RoHS Compliant CAPACITOR OUTLINE DRAWINGS TIN PLATE L W B T NICKEL PLATE S ELECTRODES CONDUCTIVE METALLIZATION DIMENSIONS—MILLIMETERS AND (INCHES) METRIC SIZE CODE METRIC (Ref only) 0603 1608 0.6 (.024) ± .03 (.001) 0.3 ± (.012) ± .03 (.001) 0.15 (.006) ± .05 (.002) N/A 1005 2012 1.0 (.04) ± .05 (.002) 0.5 (.02) ± .05 (.002) 0.20 (.008) -.40 (.016) 0.3 (.012) 0201* 0603* 0402* 0805* 1005 B - BANDWIDTH S SEPARATION minimum W - WIDTH SIZE CODE 0402* T THICKNESS L - LENGTH CODE 0603 1206* 1608 3216 1.6 (.063) ± .15 (.006) 0.8 (.032) ± .15 (.006) 0.35 (.014) ± .15 (.006) 0.7 (.028) 0805* 1210* 2012 3225 2.0 (.079) ± .20 (.008) 1.25 (.049) ± .20 (.008) 0.50 (.02) ± .25 (.010) 0.75 (.030) 1206* 3216 3.2 (.126) ± .20 (.008) 1.6 (.063) ± .20 (.008) 0.50 (.02) ± .25 (.010) N/A 1210* 3225 3.2 (.126) ± .20 (.008) 2.5 (.098) ± .20 (.008) 1812 4532 4.5 (.177) ± .30 (.012) 3.2 (.126) ± .30 (.012) 4564 4.5 (.177) ± .30 (.012) 1812 1825* 2220 1825* 2225 4532 4564 5650 See page 78 for thickness dimensions. 0.50 (.02) ± .25 (.010) N/A 0.60 (.024) ± .35 (.014) N/A 6.4 (.252) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A 2220 5650 5664 5.6 (.220) ± .40 (.016) 5.0 (.197) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A 2225 5664 5.6 (.220) ± .40 (.016) 6.3 (.248) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A MOUNTING TECHNIQUE Solder Reflow or Solder Wave + or Solder Reflow Solder Reflow Solder Reflow * Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk bassette, see page 96.) + For extended value 1210 case size - solder reflow only. CAPACITOR ORDERING INFORMATION (Standard Chips - For C 0805 C 103 K 5 R A C* CERAMIC SIZE CODE SPECIFICATION C - Standard CAPACITANCE CODE Expressed in Picofarads (pF) First two digits represent significant figures. Third digit specifies number of zeros. (Use 9 for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF) (Example: 2.2pF = 229 or 0.50 pF = 508) CAPACITANCE TOLERANCE B – ±0.10pF J – ±5% C – ±0.25pF K – ±10% D – ±0.5pF M – ±20% F – ±1% P – (GMV) – special order only G – ±2% Z – +80%, -20% 72 Military see page 87) END METALLIZATION C-Standard (Tin-plated nickel barrier) FAILURE RATE LEVEL A- Not Applicable TEMPERATURE CHARACTERISTIC Designated by Capacitance Change Over Temperature Range G – C0G (NP0) (±30 PPM/°C) R – X7R (±15%) (-55°C + 125°C) P– X5R (±15%) (-55°C + 85°C) U – Z5U (+22%, -56%) (+10°C + 85°C) V – Y5V (+22%, -82%) (-30°C + 85°C) VOLTAGE 1 - 100V 3 - 25V 2 - 200V 4 - 16V 5 - 50V 8 - 10V * Part Number Example: C0805C103K5RAC (14 digits - no spaces) 7 - 4V 9 - 6.3V ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Ceramic Surface Mount EIA EIA SIZE SIZE CODE CERAMIC CHIP/STANDARD X5R CAPACITANCE RANGE Cap pF 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1,000,000 1,200,000 1,500,000 1,800,000 2,200,000 2,700,000 3,300,000 4,700,000 5,600,000 6,800,000 8,200,000 10,000,000 12,000,000 15,000,000 18,000,000 22,000,000 27,000,000 33,000,000 39,000,000 47,000,000 100,000,000 Cap Code Cap Tolerance 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 475 565 685 825 106 126 156 186 226 276 336 396 476 107 K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M 0201 C0402* 6.3V 16V 6.3V AA~ BB BB BB BB BB BB BB BB BB BB BB AA~ BB C0603* 10V 16V BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB 6.3V 10V 16V CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC C0805* 25V 4V C1206* 6.3V 10V 16V 25V 6.3V C1210* 10V 16V 25V 6.3V 10V 16V 25V 50V BB BB BB BB° CD CC+ CC+ CC+ DG DD DE DH DD DG DD DE DH DG DG DD DE DH DD CD+ DE DH DE DH CD°+ DJ+ DH°+ DJ°+ DC DD DE DF DG DH DH EC EC EE EF EH EH EC EC EE EF EH EH EC EC EE EF EH EH DJ+ DK+ ED ED EH ED ED EH EH EH EH EH+ EH°+ EH°+ EB EB EB EC ED EE EF EH EC EC EC EE EF EH EH FK+ FH+ FD+ FD+ FD+ FG+ FG+ FH+ FK+ FK+ FH+ FH+ FD+ FD+ FD+ FG+ FG+ FH+ FK+ FJ+ FJ+ FJ+ FF+ FK+ FK+ FK+ FG+ EH+ FK+ FK+ FK+ FH+ FD+ FD+ FG+ FD+ FD+ FL+ FL+ FL+ FH+ FH+ FH+ FJ+ FQ°+ FQ°+ NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. +Reflow only ° Available M ±20% tolerance only Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option. Reels with such substitutions will be marked with the improved KEMET part numbers. Cap CAP. PF pF 6800 6,800 8200 8,200 10,000 10,000 12,000 12,000 15,000 15,000 18,000 18,000 22,000 22,000 27,000 27,000 33,000 33,000 39,000 39,000 47,000 47,000 56,000 56,000 68,000 68,000 82,000 82,000 100,000 100,000 120,000 120,000 150,000 150,000 180,000 180,000 220,000 220,000 270,000 270,000 330,000 330,000 390,000 390,000 470,000 470,000 560,000 560,000 680,000 680,000 820,000 820,000 1,000,000 1,000,000 1,200,000 1,200,000 1,500,000 1,500,000 1,800,000 1,800,000 2,200,000 2,200,000 2,700,000 2,700,000 C1206* C1210* C1812* C1825* C0805* C1206* C1210* C1812* C1825* Cap CAP Cap CAP C0805* 50V 100V 100V 50V 50V 100V 100V 50V 100V 100V 50V 50V 100V 100V 50V 50V 100V 100V 50V CODETol. TOL 50V Code M,Z DC DC DC DC 682682 M,Z M,Z DC DC DC DC 822822 M,Z EB M,Z DC DC DC DC EB EB EB 103103 M,Z EB M,Z DC DC EB EB 123123 M,Z EB EB M,Z DC DC EB EB 153153 M,Z EB EB M,Z DC DC EB EB 183183 M,Z EB EB M,Z DC DC EB EB 223223 M,Z EB EB 273 M,Z DC EB 273 M,Z DC EB EB EB M,Z DC DC EB EB 333333 M,Z EB EC M,Z DD DD EB EC 393393 M,Z EB FB FB FB EC FB M,Z DD DD EB EC 473473 M,Z EB FB FB FB EB FB M,Z DD DD EB EB 563563 M,Z EB FB FB FB EB FB M,Z DD DD EB EB 683683 M,Z EB GB GB GB FC GB FB FC EB FB M,Z DD DD EB EB 823823 M,Z EB GB GB GB FD GB FB FD EB FB 104104 M,Z EB M,Z DD DD EB EB GB GB GB FD GB FB FD 124124 M,Z EC FB M,Z EC GB GB GB FD GB 154154 M,Z EC FC FC FD M,Z EC HB HB HB 184184 M,Z EC FC GB HB GB FC M,Z EC 224224 M,Z EC FC GB HB HB HB HB GB FC M,Z EC 274274 M,Z FC GB HB HB HB HB GB FC M,Z 334334 M,Z FD GB HB HB HB HB GB FD M,Z 394394 M,Z FD GB HB HD HB HD GB FD M,Z 474474 M,Z FD GB HB HB GB FD M,Z 564564 M,Z FD GC HB HB GC FD M,Z 684684 M,Z FD GC HB HB GC FD M,Z 824824 M,Z FF GE HB HB GE FF M,Z 105105 M,Z FH GE HB HB GE FH M,Z 125125 M,Z HB HB M,Z 155155 M,Z HB HB M,Z 185185 M,Z HB HB M,Z 225225 M,Z HB HB M,Z 275275 M,Z M,Z C2225 C2225 50V 100V 100V 50V KB KB KB KB KB KB KB KB KB KB KB KB KB KB KB KB KC KC KD KD KD KD KD KD KC KC KC KC KC KC NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. 50 Volt Ceramic Chips can be used for 63 volt applications. * EIA preferred chip sizes See page 78 for Thickness Code Reference Chart. 76 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Ceramic Surface Mount Z5U CAPACITANCE RANGE (KEMET's Z5U also meets Y5V Characteristics) CERAMIC CHIP CAPACITORS Thickness Code Reference Chart Packaging Quantity Based on Finished Chip Thickness Specifications Thickness Code Chip Size AA BB CB CC CD DB DC DD DE DF DG DH DJ DK EB EC ED EE EF EG EH EJ EK EL EM EN FB FC FD FE FF FG FH FJ FK FL FM FN FO FP FQ FR FS GB GC GD GE GF GG GH GJ GK GL GM GN HB HC HD HE HF JB JC JD JE JF KB KC KD KE 0201 0402 0603 0603 0603 0805 0805 0805 0805 0805 0805 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1825 1825 1825 1825 1825 2220 2220 2220 2220 2220 2225 2225 2225 2225 Chip Thickness Range (mm) .30 ± .03 .50 ± .05 .80 ± .07 .80 ± .10 .80 ± .15 .60 ± .10 .78 ± .10 .90 ± .10 1.00 ± .10 1.10 ± .10 1.25 ± .15 1.25 ± .20 1.25 ± .20 1.25 ± .15 .78 ± .10 .90 ± .10 1.00 ± .10 1.10 ± .10 1.20 ± .15 1.60 ± .15 1.60 ± .20 1.70 ± .20 .80 ± .10 1.15 ± .15 1.25 ± .15 0.95 ± .10 .78 ± .10 .90 ± .10 .95 ± .10 1.00 ± .10 1.10 ± .10 1.25 ± .15 1.55 ± .15 1.85 ± .20 2.10 ± .20 1.40 ± .15 1.70 ± .20 1.85 ± .20 1.50 ± .20 1.60 ± .20 2.5 ± .20 2.25 ± .20 2.50 ± .20 1.00 ± .10 1.10 ± .10 1.25 ± .15 1.30 ± .10 1.50 ± .10 1.55 ± .10 1.40 ± .15 1.70 ± .15 1.60 ± .20 1.90 ± .20 2.00 ± .20 1.70 ± .20 1.10 ± .15 1.15 ± .15 1.30 ± .15 1.40 ± .15 1.50 ± .15 1.00 ± .15 1.10 ± .15 1.30 ± .15 1.40 ± .15 1.50 ± .15 1.00 ± .15 1.10 ± .15 1.30 ± .15 1.40 ± .15 Qty per Reel 7" Plastic Qty per Reel 13" Plastic Qty per Reel 7" Paper Qty per Reel 13" Paper Qty per Bulk Cassette N/A N/A N/A N/A N/A N/A 4,000 4,000 2,500 2,500 2,500 2,500 3,000 3,000 4,000 4,000 2,500 2,500 2,500 2,000 2,000 2,000 2,000 2,000 2,500 4,000 4,000 4,000 4,000 2,500 2,500 2,500 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 1,500 2,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 N/A N/A N/A N/A N/A N/A 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 8,000 8,000 8,000 8,000 8,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 8,000 8,000 8,000 8,000 8,000 8,000 8,000 8,000 8,000 8,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 15,000 10,000 4,000 4,000 4,000 N/A 4,000 N/A N/A N/A N/A N/A N/A N/A 4,000 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 50,000 10,000 10,000 10,000 N/A 10,000 N/A N/A N/A N/A N/A N/A N/A 10,000 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 50,000 15,000 N/A N/A 10,000 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A This chart refers to ceramic chip thickness codes on pages 73-76. 78 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP CAPACITORS Packaging Information Tape & Reel Packaging KEMET offers Multilayer Ceramic Chip Capacitors packaged in 8mm and 12mm plastic tape on 7" and 13" reels in accordance with EIA standard 481-1: Taping of surface mount components for automatic handling. This packaging system is compatible with all tape fed automatic pick and place systems. See page 78 for details on reeling quantities for commercial chips and page 87 for MIL-PRF-55681 chips. g handling. This packaging system is compatible with all tape fed automatic pick and place systems. See page 81 for details on reeling quantities for commercial chips and page 90 for MIL-PRF-55681 chips. Anti-Static Reel Embossed Carrier* 0402 and 0603 case sizes available on punched paper only. ® T ME KE Chip Orientation in Pocket (except 1825 Commercial, and 1825 & 2225 Military) Embossment 8mm ±.30 (.315 ±.012") or 12mm ±.30 (.472 ±.012") 178mm (7.00") or 330mm (13.00") Anti-Static Cover Tape (.10mm (.004") Max Thickness) * Punched paper carrier used for 0402 and 0603 case size. SURFACE MOUNT LAND DIMENSIONS - CERAMIC CHIP CAPACITORS - MM Reflow Solder Dimension 0402 0603 0805 1206 1210 1812 1825 2220 2225 CourtyardC C X X GG Y Z Z Y Z 2.14 2.78 3.30 4.50 4.50 5.90 5.90 7.00 7.00 G 0.28 0.68 0.70 1.50 1.50 2.30 2.30 3.30 3.30 X Y(ref) C(ref) 0.74 0.93 1.21 1.08 1.05 1.73 1.60 1.30 2.00 2.00 1.50 3.00 2.90 1.50 3.00 3.70 1.80 4.10 6.90 1.80 4.10 5.50 1.85 5.15 6.80 1.85 5.15 Wave Solder Z G X Y(ref) Smin Not Recommended 3.18 3.70 4.90 4.90 0.68 0.70 1.50 1.50 0.80 1.10 1.40 2.00 1.25 1.50 1.70 1.70 1.93 2.20 3.20 3.20 Not Recommended Packaging Grid Grid placement courtyard Placement Calculation Formula Z = Lmin + 2Jt + Tt G = Smax - 2Jh -Th X = Wmin + 2Js + Ts Tt, Th, Ts = Combined tolerances ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 93 TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size 8 mm and 12 mm D0 E 1.5 1.75 ±0.10 +0.10 -0.0 (0.059 (0.069 ±0.004) +0.004, -0.0) P0 P2 T Max T1 Max 4.0 ±0.10 2.0 ±0.05 0.600 0.100 (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Max. Note 1 D1 Min. Note 2 F P1 R Min. Note 3 T2 Max W 8 mm Single (4 mm) 4.4 1.0 3.5 ±0.05 4.0 ±0.10 25.0 2.5 8.0 ±0.30 (.315 ±0.012) 12 mm Double (8 mm) (0.173) (0.039) (0.138 ±0.002) (0.157 ±0.004) (0.984) (0.098) 8.2 (0.323) 1.5 5.5 ±0.05 (0.059) (0.217 ±0.002) 8.0 ±0.10 30.0 (0.315 ±0.004) (1.181) 4.6 12.0 ±0.30 (0.181) (0.472 ±0.012) A0B0K0 Note 4 NOTES 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not protrude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) 94 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Embossed Carrier Tape Configuration (cont.) 20° Sketch D: Tape Camber (Top View) 1mm (0.039) Max. 1mm (0.039) Max. 250mm (9.843) Allowable camber to be 1 mm/250 mm. 400mm (15.75) Min. Figure 2: Tape Leader & Trailer Dimensions (Metric Dimensions Will Govern) Packaging Figure 3: Reel Dimensions (Metric Dimensions will govern) Table 2 – REEL DIMENSIONS (Metric will govern) Tape Size 8 mm A Max 330.0 (12.992) B* Min 1.5 (0.059) C 13.0 ± 0.20 (0.512 ± 0.008) D* Min 20.2 (0.795) 12 mm 330.0 (12.992) 1.5 (0.059) 13.0 ± 0.20 (0.512 ± 0.008) 20.2 (0.795) N Min 50.0 (1.969) See Note 3 Table 1 W1 8.4 +1.5, -0.0 (0.331 +0.059, -0.0) 12.4 +2.0, -0.0 (0.488 +0.078, -0.0) W2 Max 14.4 (0.567) 18.4 (0.724) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 W3 7.9 Min (0.311) 10.9 Max (0.429) 11.9 Min (0.469) 15.4 Max (0.606) 95 CERAMIC CHIP CAPACITORS Packaging Information Punched Carrier (Paper Tape) Configuration (Ceramic Chips Only): 10 pitches cumulative tolerance on tape ±0.2 (±0.008) P0 T P2 D0 E Top Tape Cover Bottom Tape Cover A0 F W B0 G2 T1 P1 User Direction of Feed Center lines of cavity Max. Cavity Size See Note 1 Table 1 Table 1: 8 & 12mm Punched Tape (Metric Dimensions Will Govern) Constant Dimensions - Millimeters (Inches) Tape Size D0 P0 E T1 P2 G1 G2 R Min. 8mm 1.5 1.75 ±0.10 4.0 ± 0.10 2.0 ± 0.05 0.10 0.75 0.75 25 (.984) and +0.10, -0.0 (.004) (.030) (.030) See Note 2 12mm (.059 (.069 ±0.004) (.157 ± 0.004) (.079 ± 0.002) Max. Min. Min. Table 1 +0.004, -0.0) Table 1: 8 & 12mm Punched Tape (Metric Dimensions Will Govern) Variable Dimensions - Millimeters (Inches) Tape Size 8mm 1/2 Pitch P1 2.0 ± 0.10 (.079 ±.004) 3.5 ± 0.05 See Requirements Section 3.3 (d) (.138 ± .002) 8mm 4.0 ± 0.10 (0.157 ± .004) 12mm 4.0 ± 0.10 (0.157 ± .004) A0B0 W F 5.5 ± 0.05 12mm 8.0 ± 0.10 (.217 ± .002) Double (0.315 ± .004) Pitch 8.0 ± 0.3 (.315 ± 0.012) See Note 1 Table 1 12.0 ± 0.3 T 1.1mm (.043) Max. for Paper Base Tape and 1.6mm (.063) Max. for NonPaper Base Compositions. See Note 3. (.472 ± .012) Note: 1. A0, B0 and T determined by the maximum dimensions to the ends of the terminals extending from the body and/or the body dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A0, B0 and T) must be within 0.05mm (.002) minimum and 0.50mm (.020) maximum. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20 degrees (see sketches A and B). 2. Tape with components shall pass around radius "R" without damage. 3. KEMET nominal thicknesses are: 0402 = 0.6mm and all others 0.95mm minimum. Sketch A: Bending Radius See Note 2 Table 1 Sketch B: Max. Component Rotation - Front Cross Sectional View R (Min.) 20° 96 Sketch C: Component Rotation - Top View Maximum 20° component rotation. Typical component center line ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP CAPACITORS Packaging Information Bulk Cassette Packaging (Ceramic Chips only) Table 2 – Capacitance Values Available In Bulk Cassette Packaging 6.8 ± 0.1 8.8 ± 0.1 12.0 ± 0.1 (Meets Dimensional Requirements IEC-286-6 and EIAJ 7201) 53.3* 2.0 ± 31.5 ± 0.2 0 3.0 ± 0.1 0 0 0.1 0.2 0 0402 All All All All 0603 All All All All 0805 C0G 200 100 50 109 109 109 181 331 102 X7R 200 100 50 25 16 221 221 221 221 221 392 103 273 104 104 Y5V 25 16 104 104 224 224 19.0* 1.5 ± Unit: mm * Reference 36 ± 00.2 10* Min. Max. Case Cap Cap Size Dielectric Voltage Value Value 5.0* 110 ± 0.7 Table 1 – Capacitor Dimensions for Bulk Cassette Packaging – Millimeters Metric Size Code EIA Size Code 1005 1608 2012 0402 0603 0805 Length L Width W Thickness Bandwidth T B 1.0 ± 0.05 0.5 ± 0.05 1.6 ± 0.07 0.8 ± 0.07 2.0 ± 0.10 1.25 ± 0.10 0.5 ± .05 0.8 ± .07 0.6 ± .10 0.2 to 0.4 0.2 to 0.5 0.5 to 0.75 Minimum Separation S Number of Pcs/Cassette 0.3 0.7 0.75 50,000 15,000 10,000 Terminations: KEMET nickel barrier layer with a tin overplate. CAPACITOR MARKING TABLE (Marking Optional - Not Available for 0402 Size or Y5V Dielectric) 9 0 1 2 3 4 5 6 7 A B C D E F G H J K L M N P Q R S T U V W X Y Z a b d e f m n t y 0.10 0.11 0.12 0.13 0.15 0.16 0.18 0.20 0.22 0.24 0.27 0.30 0.33 0.36 0.39 0.43 0.47 0.51 0.56 0.62 0.68 0.75 0.82 0.91 0.25 0.35 0.40 0.45 0.50 0.60 0.70 0.80 0.90 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 2.5 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 25 35 40 45 50 60 70 80 90 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 250 350 400 450 500 600 700 800 900 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 2500 3500 4000 4500 5000 6000 7000 8000 9000 10,000 11,000 12,000 13,000 15,000 16,000 18,000 20,000 22,000 24,000 27,000 30,000 33,000 36,000 39,000 43,000 47,000 51,000 56,000 62,000 68,000 75,000 82,000 91,000 25,000 35,000 40,000 45,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 150,000 160,000 180,000 200,000 220,000 240,000 270,000 300,000 330,000 360,000 390,000 430,000 470,000 510,000 560,000 620,000 680,000 750,000 820,000 910,000 250,000 350,000 400,000 450,000 500,000 600,000 700,000 800,000 900,000 1,000,000 1,100,000 1,200,000 1,300,000 1,500,000 1,600,000 1,800,000 2,000,000 2,200,000 2,400,000 2,700,000 3,000,000 3,300,000 3,600,000 3,900,000 4,300,000 4,700,000 5,100,000 5,600,000 6,200,000 6,800,000 7,500,000 8,200,000 9,100,000 2,500,000 3,500,000 4,000,000 4,500,000 5,000,000 6,000,000 7,000,000 8,000,000 9,000,000 10,000,000 11,000,000 12,000,000 13,000,000 15,000,000 16,000,000 18,000,000 20,000,000 22,000,000 24,000,000 27,000,000 30,000,000 33,000,000 36,000,000 39,000,000 43,000,000 47,000,000 51,000,000 56,000,000 62,000,000 68,000,000 75,000,000 82,000,000 91,000,000 25,000,000 35,000,000 40,000,000 45,000,000 50,000,000 60,000,000 70,000,000 80,000,000 90,000,000 Laser marking is available as an extra-cost option for most KEMET ceramic chips. Such marking is two sided, and includes a K to identify KEMET, followed by two characters (per EIA-198 - see table below) to identify the capacitance value. Note that marking is not available for size 0402 nor for any Y5V chip. In addition, the 0603 marking option is limited to the K only. KA3 Example shown is 1,000 pF capacitor. ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Packaging Capacitance (pF) For Various Numeral Identifiers Numeral Alpha Character 97