1794 Series ELECTRICAL CHARACTERISTICS Nominal Frequency 10 to 40 MHz Initial Frequency Accuracy @+25 C with the Control Voltage @ +2.50 VDC Temperature Stability including ±10% Load Change and ±5% Input Voltage change Input Voltage ±20 PPM See Table I +5Vdc ± 5% 25 mA max CMOS Squarewave RF Output Duty Cycle VCXO 40 / 60%measured at 50% amplitude level Logic 0 0.5 V MAX Logic 1 4.0 V MIN Rise Time 5 nsec max measured from 10% to 90% levels Fall Time 5 nsec measured from 90% to 10% levels Load Tested with 2 CMOS Loads but capable of driving up to 10. Voltage Control Function Control Voltage Range 0.50 to 4.50 VDC Frequency Deviation (with respect to nominal frequency) Linearity See Table I ±20% maximum Input Impedance Aging: 10 to 25 MHz 26 to 40 MHz >10K ±2 PPM 1st year & ±10 PPM for 10 years ±3 PPM 1st year & ±15 PPM for 10 years ABOLUTE MAXIMUM RATINGS Supply Voltage -0.5 to +6.00 VDC DC Input Current 50 mA maximum Storage Temperature range -62 C to +125 C Lead Temperature (Soldering, 10 seconds) 300 C Vectron International Custom Datasheet Revision Date : 6-14-05 SEM Date Printed: 2005-07-08 1/5 Vectron International LLP 100 Watts Street Mount Holly Springs, Pennsylvania 17065, USA Tel 1-717-486-3411 Fax 1-717-486-5920 www.vectron.com Vectron International Landstrasse D-74924 Neckarbischofsheim, Germany Tel +49-7268-801-0 Fax +49-07268-801-281 www.corningfrequency.de 1794 Series VCXO ENVIRONMENTAL CHARACTERISTICS Sine Vibration Mil-STD-202, Method 204, TC D Random Vibration Mil-STD-202, Method 214 TC I-K (15 minutes per axis) Shock Mil-STD-202, Method 213, TC F Acceleration Mil-STD-883, Method 2001, TC A Altitude 50,000 feet minimum to deep space Radiation Radiation testing is not performed, but these VCXOs have been acceptable for use in environments up to 100K rads by analysis of the components used. They are assembled with all bipolar semiconductors with the exception of the ACMOS chip used for the CMOS output which is purchased from a wafer that has been tested to a minimum of 100K rads total dose. A copy of the parts list and materials can be provided for review. TABLE I FREQUENCY STABILITY and FREQUENCY DEVIATION OPTIONS These limits guarantee that under the worse case conditions of temperature, supply voltage, load stability and 10 years aging, that the oscillator can be pulled back on to nominal frequency with the Control Voltage function. OPTION FREQUENCY STABILITY FREQUENCY DEVIATION A 20 PPM 0oC to +50oC 65 PPM minimum B 25 PPM -20oC to +70oC 70 PPM minimum o o C 30 PPM -40 C to +85 C 75 PPM minimum D 40 PPM -55oC to +105oC 85 PPM minimum Vectron International Custom Datasheet Revision Date : 6-14-05 SEM Date Printed: 2005-07-08 2/5 Vectron International LLP 100 Watts Street Mount Holly Springs, Pennsylvania 17065, USA Tel 1-717-486-3411 Fax 1-717-486-5920 www.vectron.com Vectron International Landstrasse D-74924 Neckarbischofsheim, Germany Tel +49-7268-801-0 Fax +49-07268-801-281 www.corningfrequency.de 1794 Series VCXO TABLE II CONSTRUCTION, SCREENING & TESTING OPTIONS NOTE: For Engineering or Prototype VCXOs requiring basic electrical testing only and no Screening, or Groups A and B Testing, use the code letter E . Option Code S R C B Operation Mil-PRF-55310 Mil-PRF-55310 Mil-PRF-55310 Mil-PRF-55310 Design, Construction Class S Class B Class B Class B & Component Screen (see Mfging Section) M883, Method 2017 M883, Method 2017 M883, Method 2017 M883, Method 2017 Workmanship for Class S for Class B for Class B for Class B Mil-PRF-55310 Mil-PRF-55310 Mil-PRF-55310 Mil-PRF-55310 Screening Class S Class S Class B modified Class B Non-Destruct Wire 100% 100% N/A N/A Bond Pull Internal Visual M883, Method 2017 M883, Method 2017 M883, Method 2017 M883, Method 2017 for Class S for Class B for Class B for Class B Stabilization Bake 48 hrs minimum @ 48 hrs minimum @ 48 hrs minimum @ 48 hrs minimum @ +150 C +150 C +150 C +150 C Thermal Shock M883, Method 1011, M883, Method N/A N/A TC A 1011, TC A Temperature Cycling M883, Method 1010, M883, Method M883, Method 1010, M883, Method 1010, TC B 1010, TC B TC B TC B Constant Acceleration M883, Method 2001, M883, Method M883, Method 2001, M883, Method 2001, TC A (5000 gs, Y1 2001, TC A (5000 TC A (5000 gs, Y1 TC A (5000 gs, Y1 Axis only) gs, Y1 Axis only) Axis only) Axis only) Seal Test 100% 100% 100% 100% (fine & gross) PIND M883, Method 2020, M883, Method M883, Method 2020, N/A TC B 2020, TC B TC B Electrical Test @ +25 C only @ +25 C only @ +25 C only @ +25 C only Frequency, Output levels, Input Current Burn-In +125 C for 240 +125 C for 240 +125 C for 160 hours +125 C for 160 hours (Powered with load) hours hours Electrical Test @ +25 C & Temp @ +25 C & Temp @ +25 C & Temp @ +25 C & Temp Frequency, Output Extremes specified Extremes specified Extremes specified Extremes specified levels, Input Current in Table II in Table II in Table II in Table II PDA 2% applies to Input 2% applies to Input 10% applies to Input 10% applies to Input Current @ +25 C Current @ +25 C Current @ +25 C Current @ +25 C Radiographic M883, Method 2012 M883, Method 2012 N/A N/A Group A 100% 100% Group B (30 day Aging @ +70 C) 100% 100% Vectron International Custom Datasheet Revision Date : 6-14-05 SEM Sample per Mil-PRF-55310 Sample per Mil-PRF-55310 Sample per Mil-PRF-55310 Sample per Mil-PRF-55310 Date Printed: 2005-07-08 Vectron International LLP 100 Watts Street Mount Holly Springs, Pennsylvania 17065, USA Tel 1-717-486-3411 Fax 1-717-486-5920 www.vectron.com Vectron International Landstrasse D-74924 Neckarbischofsheim, Germany Tel +49-7268-801-0 Fax +49-07268-801-281 www.corningfrequency.de 3/5 1794 Series VCXO MANUFACTURING INFORMATION TRAVELLERS Travellers or Process Cards are used in the manufacturing and testing of all of the 1794 Series VCXOs and are available for customer review. Copies of these Travellers can be provided with the VCXOs at time of shipment if so specified on the purchase order. TRACEABILITY and HOMOGENEOUS MATERIAL Option Codes S & R only Manufacturing lot and date code information shall be recorded, by VCXO serial number, of every component and all materials used in the manufacture of that VCXO. Also all semiconductors used in the manufacture of any given Production Lot of VCXOs, shall be from the wafer and have the same manufacturing lot date code. A Production Lot, as defined by Corning, is all oscillators that have been kitted and assembled as a single group. After the initial kitting and assembly, this Production Lot may be divided into multiple sublots to facilitate alignment and test capacity and may be sealed at multiple times within a 13 week window. TEST DATA All Test Data is recorded by VCXO serial number. Copies of this data can be provided with the VCXOs at time of shipment if so specified on the purchase order. REWORK All rework follows the requirements of Mil-PRF-55310 Class S for Option Code S and Class B for Option Codes R , B and C . The only exception is the Select-At-Test components may be replaced up to four times. PART NUMBER BREAKDOWN 1794 E 25M000000 S N MMSeries Model # N No special requirements S Special requirements specified on P. O. Screening Option from Table III Frequency (total of 9 characters) Frequency Stability Vectron International Custom Datasheet Revision Date : 6-14-05 SEM Date Printed: 2005-07-08 Vectron International LLP 100 Watts Street Mount Holly Springs, Pennsylvania 17065, USA Tel 1-717-486-3411 Fax 1-717-486-5920 www.vectron.com Vectron International Landstrasse D-74924 Neckarbischofsheim, Germany Tel +49-7268-801-0 Fax +49-07268-801-281 www.corningfrequency.de 4/5 1794 Series VCXO Mechanical Outline and Pin Connections Vectron International Custom Datasheet Revision Date : 6-14-05 SEM Date Printed: 2005-07-08 Vectron International LLP 100 Watts Street Mount Holly Springs, Pennsylvania 17065, USA Tel 1-717-486-3411 Fax 1-717-486-5920 www.vectron.com Vectron International Landstrasse D-74924 Neckarbischofsheim, Germany Tel +49-7268-801-0 Fax +49-07268-801-281 www.corningfrequency.de 5/5