PX-209 Hi-Reliability Crystal Oscillator PX-209 Features • • • • Applications Hybrid Sinewave design Processed in accordance with MIL-PRF-55310D, Class S Frequency Range: 10 MHZ to 300 MHZ Previous Model: 487Y(EEEE) • Performance Specifications Parameter Min Typ Max Units Condition 1 Frequency Stabilities vs. operating temperature range (referenced to +25°C) -40 +40 ppm vs. aging / 1 year vs. aging / year (following years) -3 -2 +3 +2 ppm ppm -20… +65°C (custom number required) Supply Voltage (Vs) Supply voltage 14.25 Power consumption 15.0 15.75 VDC 50 mA RF Output Sinewave Signal Output Power Harmonics Sub-Harmonics 0 +7 dBm dBm -20 -20 50 Ohm load 50 Ohm load dBc dBc Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Parameter Min Typ Max Units Condition Additional Parameters Crystal: Swept quartz, AT, 3 point mount Components: Class “S” Microelectronic element evaluation per Appendix B of MIL-PRF-55310D Rework: In accordance with MIL-PRF-55310D, Class S Class “S” screened: In accordance with MIL-PRF-55310D, Table III, including internal visual inspection per MIL-STD-883, Method 2017, and PIND testing 100% PIND testing: In accordance with MIL-STD-883, Method 2020, Condition B. We may use a VI approved material as a “getter” in our manufacturing process to help pass PIND. Group A & B: 100% Group A and 100% Group B testing Leads: Must meet solderability requirements of MIL-STD-202, Method 208 Salt Spray: Salt spray/salt atmosphere not included in this specification. Radiation: Active die are of bi-polar technology inherently radiation tolerant. If required, VI will provide a parts list and schematic (NDA required) for review of radiation hardness. Standard shock and vibration (survive; met by design, not tested): Shock: 100G, 6 ms per MIL-STD-202, Method 213, Condition C Vibration: Sine: 20G to 2 kHz per MIL-STD-202, Method 204, Condition D Random: 20 Grms overall to 2 kHz per MIL-STD-202, Method 214, Condition I-F 1. Notes: Engineering models are fit, form and function representative of Flight Models and of commercial construction using commercial parts of same generic type as Flight Models. Completed oscillators are not screened, will not contain swept quartz, and are not suitable for flight, DPA, or RGA. Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Type C Code Height “H” Pin Length 0 0.17” 0.40” Pin Connections 8 Ground (Case) 9 RF Output 11 RF Return (Case) 16 Supply others Do Not Use (may be used internally) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information PX - 209 0 - A E X - J J X S - 10M0000000 Frequency Product Family PX: PXO Package 25 x 25 mm Platform Code Output Power 0: 0 dBm 1: +7 dBm Height 0: C0.17” Screening Option S: “S” Level Screening Supply Voltage A: 15 Vdc Temp. Stability Code J: ±40ppm RF Output Code E: Sinewave Accuracy Code J: ±40ppm Temperature Range X: -20… +65°C (custom number required) Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 1/27/2009 daf Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com