VCC1
CMOS Crystal Oscillator
VCC1
Description
Vectron’s VCC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The VCC1 uses a fundamental or 3rd
overtone crystal resulting in very low jitter performance, and a monolithic IC which improves reliability and reduces cost.
Features
Applications
•
•
•
•
•
•
•
•
Ultra Low Jitter, Fundamental or 3rd OT Crystal Design
CMOS Output Crystal Oscillator
Output Frequencies from 1.024 MHz to 190.000 MHz
5.0, 3.3, 2.5 or 1.8 V Operation
Output Disable Feature
Excellent 20ppm temperature stability
-10/70°C , -40/85°C or -55/125°C operating temperature
Small Industry Standard Package, 5x7mm
•
Product is compliant to RoHS directive
and fully compatible with lead free assembly
•
•
•
•
•
•
•
•
•
•
SONET/SDH/DWDM
Ethernet, GE, SynchE
Storage Area Networking
Fiber Channel
Digital Video
Broadband Access
Base Stations, Picocells
Driving A/D’s, D/A’s, FPGA’s
Test and Measurement
COTS
Block Diagram
Output
VDD
Crystal
Oscillator
GND
E/D
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page1
Performance Specifications
Table 1. Electrical Performance, 5V Option
Parameter
Symbol
Minimum
Typical
Maximum
Units
5.0
5.5
V
Supply
Voltage1
VDD
Max Voltage
4.5
-0.7
Current2
≤20.000MHz
20.001 to 50.000MHz
50.001 to 85.000MHz
85.001 to 125.000MHz
7
IDD
V
mA
10
30
50
60
Current, Output Disabled
30
uA
125.000
MHz
Frequency
Nominal Frequency3
fN
1.544
4
Stability , (Ordering Option)
±20, ±25, ±32, ±50, ±100
ppm
Outputs
2
Output Logic Levels
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
VOH
VOL
IOH
IOL
Load
IOUT
2
Output Rise /Fall Time
<20.000MHz
20.000 to 50.000MHz
50.001 to 125.000MHz
Output Leakage, Output Disabled
V
V
mA
mA
15
pF
16
16
ns
8
5
2
IZ
45
6
0.1*VDD
tR/tF
Duty Cycle2,5
Period Jitter
RMS
Peak-Peak
0.9*VDD
50
±10
uA
55
%
фJ
ps
2.5
18
RMS Jitter, 12k-20MHz
фJ
0.5
1
ps
0.8
V
V
100
ns
Enable/Disable
Output Enable/Disable7
Output Enable
Output Disable
VIH
VIL
Disable time
tD
4.0
Enable Internal Pull-Up Resistor
100
Start-Up Time
tSU
Operating Temp, (Ordering Option)
TOP
1]
2]
3]
4]
5]
6]
7]
Kohm
10
-10/70, -40/85, -55/125
ms
°C
The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF
Parameters are tested with the test circuit shown in Figure 1.
See Standard Frequencies and Ordering Information tables for more specific information
Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and 10 years aging.
Duty Cycle is measured as On Time/Period, see Fig 2.
Broadband Period Jitter measured using a LeCroy Wavemaster 8600A, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance
The Output is Enabled if the Enable/Disable is left open.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page2
Performance Specifications
Table 2. Electrical Performance, 3.3V Option
Parameter
Symbol
Mininum
Typical
Maximum
Units
3.3
3.63
V
5
V
Supply
Voltage1
VDD
Maximum Voltage
2.97
-0.5
2
IDD
Current
≤20.000
20.001 to 50.000
50.001 to 85.000
85.001 to 190.000
mA
7
20
30
50
Current, Output Disabled
30
uA
Frequency
3
Nominal Frequency
fN
1.544
Stability4, (Ordering Option)
190.000
±20, ±25, ±32, ±50, ±100
MHz
ppm
Outputs
2
Output Logic Levels
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
VOH
VOL
IOH
IOL
Load
IOUT
2
Output Rise /Fall Time
<20.000MHz
20.000 to 50.000MHz
50.001 to 90.000MHz
90.001 to 190.000MHz
Output Leakage, Output Disabled2,5
Duty Cycle
0.9*VDD
Period Jitter
RMS
Peak-Peak
V
V
mA
mA
15
pF
8
8
tR/tF
ns
6
4
3
2
IZ
2,5
45
6
0.1*VDD
50
±10
uA
55
%
фJ
ps
2.5
18
RMS Jitter, 12k-20M
фJ
0.5
1
ps
0.5
V
V
100
ns
Enable/Disable
Output Enable/Disable7
Output Enable
Output Disable
VIH
VIL
Disable time
tD
2.0
Enable Internal Pull-Up Resistor
100
Start-Up Time
tSU
Operating Temp, (Ordering Option)
TOP
1]
2]
3]
4]
5]
6]
7]
Kohm
10
-10/70, -40/85, -55/125
ms
°C
The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF
Parameters are tested with the test circuit shown in Figure 1.
See Standard Frequencies and Ordering Information tables for more specific information
Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and 10 years aging.
Duty Cycle is measured as On Time/Period, see Fig 2.
Broadband Period Jitter measured using a LeCroy Wavemaster 8600A, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance
The Output is Enabled if the Enable/Disable is left open.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page3
Performance
Specifications
Table 3. Electrical Performance, 2.5V
Option
Parameter
Symbol
Mininum
Typical
Maximum
Units
2.5
2.75
V
5
V
Supply
Voltage1
VDD
Maximum Voltage
2.25
-0.5
2
Current
≤20.000MHz
20.001 to 50.000MHz
50.001 to 110.000MHz
110.001 to 190.000MHz
IDD
mA
7
15
20
30
Current, Output Disabled
30
uA
Frequency
3
Nominal Frequency
fN
1.544
Stability4, (Ordering Option)
190.000
±20, ±25, ±32, ±50, ±100
MHz
ppm
Outputs
2,3
Output Logic Levels
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
Output Logic High Drive5
Output Logic Low Drive5
0.9*VDD
0.1*VDD
VOH
VOL
IOH
IOL
Load
IOUT
Output Rise /Fall Time2
<20.000MHz
20.000 to 50.000MHz
50.001 to 90.000MHz
90.001 to 190.000MHz
tR/tF
4
4
8
8
15
Duty Cycle2,6
Period Jitter
RMS
Peak-Peak
pF
ns
10
6
3
2
Output Leakage, Output Disabled
45
7
V
V
mA
mA
mA
mA
50
±10
uA
55
%
фJ
ps
2.5
18
RMS Jitter, 12k-20MHz
фJ
0.5
1
ps
0.5
V
V
Enable/Disable
Output Enable/Disable
Output Enable
Output Disable
8
Disable time
VIH
VIL
1.75
100
tD
Enable Internal Pull-Up Resistor
100
Start-Up Time
tSU
Operating Temp, (Ordering Option)
TOP
1]
2]
3]
4]
5]
6]
7]
ns
Kohm
10
-10/70, -40/85, -55/125
ms
°C
The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF
Parameters are tested with the test circuit shown in Figure 1.
See Standard Frequencies and Ordering Information tables for more specific information
Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and 10 years aging.
Duty Cycle is measured as On Time/Period, see Fig 2.
Broadband Period Jitter measured using a LeCroy Wavemaster 8600A, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance
The Output is Enabled if the Enable/Disable is left open.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page4
Performance Specifications
Table 4. Electrical Performance, 1.8V Option
Parameter
Symbol
Mininum
Typical
Maximum
Units
1.8
1.89
V
3.6
V
Supply
1
Voltage
VDD
Maximum Voltage
1.71
-0.5
2
Current
≤20.000MHz
20.001 to 70.000MHz
70.001 to 96.000MHz
96.001 to 125.000MHz
125.001 to 172.000MHz
IDD
mA
5
15
20
25
30
Current, Output Disabled
30
uA
172.000
MHz
Frequency
3
Nominal Frequency
fN
1.544
4
Stability , (Ordering Option)
±20, ±25, ±32, ±50, ±100
ppm
Outputs
Output Logic Levels2,3
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
Output Logic High Drive5
Output Logic Low Drive5
VOH
VOL
IOH
IOL
IOH
IOL
Load
IOUT
2
Output Rise /Fall Time
<20.000MHz
20.000 to 50.000MHz
50.001 to 90.000MHz
90.000 to 172.000MHz
Output Leakage, Output Disabled
Duty Cycle
V
V
mA
mA
15
pF
2.8
2.8
8
8
ns
4
4
3
2
IZ
45
7
0.1*VDD
tR/tF
2,6
Period Jitter
RMS
Peak-{eak
0.9*VDD
50
±10
uA
55
%
фJ
ps
2.5
18
RMS Jitter, 12kHz-20MHz
фJ
0.5
1
ps
0.5
V
V
100
ns
Enable/Disable
Output Enable/Disable8
Output Enable
Output Disable
VIH
VIL
Disable time
tD
1.26
Enable Internal Pull-Up Resistor
1
Start-Up Time
tSU
Operating Temp, Ordering Option
TOP
1]
2]
3]
4]
5]
6]
7]
Mohm
10
-10/70, -40/85, -55/125
ms
°C
The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF
Parameters are tested with the test circuit shown in Figure 1.
See Standard Frequencies and Ordering Information tables for more specific information
Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and 10 years aging.
Duty Cycle is measured as On Time/Period, see Fig 2.
Broadband Period Jitter measured using a LeCroy Wavemaster 8600A, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance
The Output is Enabled if the Enable/Disable is left open.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page5
Test Diagram and Waveform
tR
IDD
+
VDD
tF
VOH
.1μF
.01μF
4
3
1
2
50%
VOL
15pF
On Time
+
Period
Fig 1: Test Circuit
Fig 2: Waveform
Outline Drawing & Pad Layout
Part Number
Frequency
Date Code
1.6±0.3
Recommended Soldering Pad Layout
Dimensions in mm
Part Number
Frequency
Date Code
Table 5. Pin Out
Pin
Alternate Package Design
Symbol
Function
1
E/D
Enable Disable
2
GND
Case and Electrical Ground
3
Output
Output
4
VDD
Power Supply Voltage
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page6
Reliability
VI qualification includes aging at various extreme temperatures, shock and vibration, temperature cycling, and IR reflow
simulation. The VCC1 family is capable of meeting the following qualification tests:
Table 6. Environmental Compliance
Parameter
Conditions
Mechanical Shock
MIL-STD-883, Method 2002
Mechanical Vibration
MIL-STD-883, Method 2007
Temperature Cycle
MIL-STD-883, Method 1010
Solderability
MIL-STD-883, Method 2003
Gross and Fine Leak
MIL-STD-883, Method 1014
Resistance to Solvents
MIL-STD-883, Method 2015
Moisture Sensitivity Level
MSL 1
Contact Pads
Gold over Nickel
Although ESD protection circuitry has been designed into the VCC1 proper precautions should be taken when handling
and mounting. VI employs a human body model (HBM) and a charged device model (CDM) for ESD susceptibility testing
and design protection evaluation.
Table 7. ESD Ratings
Model
Minimum
Conditions
Human Body Model
1500V
MIL-STD-883, Method 3015
Charged Device Model
1000V
JESD22-C101
Typical
Characteristics
- Phase
Noise
andthe
Gain
Curve
Stresses in excess of
the absolute
maximum ratings can
permanently
damage
device.
Functional operation is not
implied at these or any other conditions in excess of conditions represented in the operational sections of this datasheet.
Exposure to absolute maximum ratings for extended periods may adversely affect device reliability. Permanent damage is
also possible if E/D is applied before VDD.
Table 8. Absolute Maximum Ratings
Parameter
Symbol
Ratings
Unit
Storage Temperature
TS
-55 to 125
°C
Soldering Temp/Time
TLS
260 / 30
°C / sec
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page7
IR Reflow
The VCC1 is qualified to meet the JEDEC
standard for Pb-Free assembly. The
temperatures and time intervals listed
are based on the Pb-Free small body
requirements. The VCC1 device is
hermetically sealed so an aqueous wash is
not an issue.
Table 9. Reflow Profile
Parameter
Symbol
Value
PreHeat Time
Ts-min
Ts-max
tS
60 sec Min, 260 sec Max
150°C
200°C
Ramp Up
RUP
3 °C/sec Max
Time Above 217 °C
tL
60 sec Min, 150 sec Max
Time To Peak Temperature
TAMB-P
480 sec Max
Time at 260 °C
tP
30 sec Max
Ramp Down
RDN
6 °C/sec Max
Tape and Reel
Tape & Reel (EIA-481-2-A)
Table 10. Tape and Reel Information
Tape Dimensions (mm)
Reel Dimensions (mm)
Dimension
W
F
Do
Po
P1
A
B
C
D
N
W1
W2
Tolerance
Typ
Typ
Typ
Typ
Typ
Typ
Min
Typ
Min
Min
Typ
Max
# Per
Reel
VCC1
16
7.5
1.5
4
8
180
2
13
21
60
17
21
1000
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page8
Table 11. Standard Output Frequencies (MHz)
1.544
1.843
2.000
2.048
2.560
3.080
3.686
4.000
4.032
4.096
4.9152
5.000
6.000
6.176
7.3728
7.680
8.000
8.192
9.216
9.600
9.830
10.000
10.240
10.486
12.000
12.222
12.2725
12.288
12.352
12.500
12.544
12.624
12.729
12.800
12.81089
12.960
13.000
13.070
13.107
13.200
13.248
13.400
13.401
13.500
13.560
13.711
13.824
14.000
14.284
14.2848
14.285
14.318
14.31818
14.336
14.400
14.500
14.5152
14.720
14.736
14.745
14.746
15.000
15.211
15.360
15.555
15.625
15.748
15.74886
15.974
16.000
16.016
16.128
16.368
16.384
16.388
16.500
16.588
16.610
16.660
16.666
16.667
16.670
16.776
16.780
16.896
16.9344
17.000
17.0664
17.37476
17.408
17.600
17.664
17.734
17.73448
17.920
17.992
18.000
18.333
18.400
18.432
18.688
18.750
19.000
19.022
19.200
19.268
19.286
19.392
19.440
19.456
19.530
19.654
19.660
19.6608
19.752
19.774
19.872
19.968
20.000
20.00271
20.141
20.200
20.2752
20.480
20.516
20.712
20.736
20.769
20.7692
20.800
20.828
20.829
20.829
20.830
20.875
20.950
20.971
21.000
21.333
21.400
21.500
21.504
21.616
21.71055
21.711
22.000
22.118
22.174
22.184
22.217
22.500
22.579
22.5792
22.600
22.855
22.85568
23.000
23.040
23.732
24.000
24.431
24.444
24.540
24.545
24.5454
24.576
24.704
24.832
25.000
25.088
25.175
25.180
25.272
25.920
26.000
26.25641
26.664
26.6649
26.666
27.000
27.120
27.500
28.000
28.224
28.60489
28.636
28.63636
28.65645
28.672
28.800
29.000
29.265
29.491
29.49893
29.500
30.000
30.150
30.200
30.720
30.880
31.000
31.104
31.250
31.307
31.500
31.680
31.948
31.949
32.000
32.250
32.256
32.270
32.500
32.764
32.768
32.768
32.800
33.000
33.1776
33.300
33.333
33.792
33.810
33.860
33.8688
34.368
34.450
34.560
34.816
35.000
35.280
35.46895
35.500
35.600
35.840
35.984
36.000
36.500
36.666
36.860
36.864
36.923
37.000
37.056
37.140
37.376
37.500
37.643
38.000
38.3107
38.800
38.810
38.880
38.912
39.0625
39.497
39.9278
40.000
40.010
40.079
40.500
40.550
40.632
40.63232
40.920
40.960
41.472
41.500
41.657
41.660
41.670
41.750
41.895
41.931
42.000
42.400
42.500
42.620
43.000
43.560
44.000
44.137
44.236
44.250
44.267
44.330
44.434
44.539
44.732
44.736
44.928
45.000
45.135
45.158
45.818
46.080
46.232
46.2321
46.320
46.796
46.864
47.13333
47.16602
47.197
47.404
47.40437
48.000
48.33008
48.587
48.58736
48.600
48.81441
49.127
49.152
49.36221
49.408
49.512
49.58632
49.867
49.980
50.000
51.156
51.200
51.840
51.840
52.000
52.416
52.500
52.560
53.125
53.330
54.000
54.072
54.125
54.2174
54.500
55.000
55.289
55.500
56.000
56.064
56.446
56.448
56.666
57.272
57.344
57.600
57.800
58.000
58.250
58.320
58.982
58.982
59.000
60.000
60.480
61.000
61.250
61.440
62.000
62.208
62.500
62.800
63.000
63.8976
64.000
64.512
65.000
65.520
65.536
66.000
66.600
66.660
66.666
66.667
66.670
67.500
67.584
68.000
68.680
68.736
69.632
70.000
70.626
70.656
70.660
70.676
70.833
71.680
72.000
73.728
74.176
74.250
75.000
76.800
77.680
77.760
78.000
78.336
79.452
80.000
81.000
81.920
83.000
83.300
83.333
85.000
87.040
87.182
87.472
89.472
89.512
89.97804
90.000
91.008
92.000
95.000
96.000
97.776
98.304
100.000
102.400
103.680
104.000
106.250
110.000
112.500
114.000
115.200
116.640
120.000
125.000
125.010
127.000
128.000
133.000
135.000
144.600
150.000
155.520
156.250
157.000
166.000
167.000
189.000
190.000
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page9
Ordering Information
VCC1- B3B- xxMxxxxxxx
Product
5x7 Crystal Oscillator
Frequency in MHz
Power Supply
A: +5.0 Vdc, 15pF
B: +3.3 Vdc, 15pF
C: +3.0 Vdc, 15pF
E: +5.0 Vdc, 50pF
F: +3.3 Vdc, 50pF
G: +2.5 Vdc, 15pF
H: +1.8 Vdc, 15pF
Stability
A: ±100ppm over -10/70°C
B: ±50ppm over -10/70°C
C: ±100ppm over -40/85°C
D: ±50ppm over -40/85°C
E: ±25ppm over -10/70°C
F: ±25ppm over -40/85°C
K: ±32ppm over -10/70°C
O: ±32ppm over -40/85°C
P: ±100ppm over -55/125°C
R: ±50ppm over -55/125°C
Electrical Options:
3: Tri-state 45/55% Duty Cycle
The following codes are not recommended for new designs
0: No Tri-state, 40/60% Duty
1: Tri-state, 40/60% Duty
2: No tri-state, 45/55% Duty
5: Enable, 40/60% Duty
6: Enable, 45/55% Duty
Example: VCC1-B3B-125M000000
*Note: not all combination of options are available.
Other specifications may be available upon request.
20ppm Stability Ordering Information
VCC1-105-frequency = ±20ppm over -10/70°C, +5.0Vdc, 45/55% Duty Cycle, 15pF load
VCC1-103-frequency = ±20ppm over -10/70°C, +3.3Vdc, 45/55% Duty Cycle, 15pF load
VCC1-118-frequency = ±20ppm over -10/70°C, +2.5Vdc, 45/55% Duty Cycle, 15pF load
VCC1-119-frequency = ±20ppm over -10/70°C, +1.8Vdc, 45/55% Duty Cycle, 15pF load
For Additional Information, Please Contact
USA:
Europe:
Asia:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
VI Shanghai
1589 Century Avenue, the 19th Floor
Chamtime International Financial Center
Shanghai, China
Tel: 86.21.6081.2888
Fax: 86.21.6163.3598
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 09/24/2010
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page10