NF Series IDC Transition Header (1.27mm Pitch) Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range: Soldering Temperature: 1,000MΩ min. at 500V DC 500V AC rms for 1 minute 15mΩ max. at 10mA 1A –20°C to +85°C 260°C / 5 sec. NFP - 10G - 0100 BF Series (plug) No. of Leads Type of Plating: Materials and Finish Housing: PBT (glass filled), UL 94V-0 rated Contacts: Beryllium Copper Plating: Au over Ni Base Mating Face Solder Terminals BF Ni 2.5~4.5µm Au 0.3µm min. Au 0.05µm min. FF Ni 2.5~4.5µm Au 0.5µm min. Au 0.05µm min. Applicable Cables Features Contact pitch 1.27mm connectors for high-density mounting Variations include cable connection and board-to-board connection types Unique three-fork contact of IDC type allows termination of 0.635mm pitch flat cable AWG 30 stranded wire, AWG 30 solid wire, 0.635mm pitch (e.g. FLEX-*S, see Section E) Jigs and Tools Hand press: FX-003 Applicable jig: NFG-105 Platen: Standard platen Outline Dimensions View ‘A’ Recommended PCB Layout Top View from Socket View ‘A’ Standard types Part Number No. of Leads A NFP-10G-0100BF NFP-16G-0100BF NFP-20G-0100BF NFP-20G-0100FF NFP-26G-0100BF NFP-26G-0100FF NFP-34G-0100BF NFP-34G-0100FF NFP-40G-0100BF NFP-40G-0100FF 10 16 20 20 26 26 34 34 40 40 11.08 14.89 17.43 17.43 21.24 21.24 26.32 26.32 30.13 30.13 B 5.08 8.89 11.43 11.43 15.24 15.24 20.32 20.32 24.12 24.12 Part Number No. of Leads NFP-50G-0100BF NFP-50G-0100FF NFP-60G-0100BF NFP-64G-0100BF NFP-64G-0100FF NFP-80G-0100BF NFP-80G-0100FF NFP-100G-0100BF NFP-100G-0100FF 50 50 60 64 64 80 80 100 100 A B 36.48 36.48 42.83 45.37 45.37 55.53 55.53 68.23 68.23 30.48 30.48 36.83 39.37 39.37 49.53 49.53 62.23 62.23 For the following versions below please contact Yamaichi, minimum order quantity may be required NFP-10G-0100FF NFP-16G-0100FF NFP-60G-0100BF Sockets and Connectors 10 16 60 11.08 14.89 42.83 5.08 8.89 36.83 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER