FNS Series DIN41612 - IDC Type Socket, 64 Leads Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range: 106MΩ min. at 500V DC 1,000V AC rms for 1 minute 20mΩ max. at 10mA 1A –65°C to +85°C Materials and Finish Housing: PBT (glass filled), UL 94V-0 rated Contacts: Copper Alloy Plating: Mating Face Contacts - Au over Nickel IDC Terminals - Flash Au over Nickel Features 2.54mm pitch IDC type connectors for 1.27mm cable, conforming to DIN41612 standards of compatibility FNS12 - 064 00-00 B F Series No. No. of Leads Terminal Type 00 = IDC Contact Plating in Mating Area: B = Au 0.3µm min. over Ni Contact Plating in IDC Area: F = Flash Au over Ni Part Number for Strain Relief: FNS13-06400-1000 Applicable Cables (see Section D) AWG 28 stranded wire, AWG 30 solid wire, with 1.27mm pitch Outline Dimensions 2.54 +– 0.1 0.80 (1.80) Hand press: FX-003 Positioning Tool for FNS12 = Part No. FN-106 Contact Details (contacts in rows A and B) SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER (15.20) Applicable Tool for FNS Series Sockets and Connectors FNS Series DIN41612 - IDC Type Socket, 64 Leads Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range: 106MΩ min. at 500V DC 1,000V AC rms for 1 minute 20mΩ max. at 10mA 1A –65°C to +85°C Materials and Finish Housing: PBT (glass filled), UL 94V-0 rated Contacts: Copper Alloy Plating: Mating Face Contacts - Au over Nickel IDC Terminals - Flash Au over Nickel Features 2.54mm pitch IDC type connectors for 1.27mm cable, conforming to DIN41612 standards of compatibility FNS13 - 064 00-00 B F Series No. No. of Leads Terminal Type 00 = IDC Contact Plating in Mating Area: B = Au 0.3µm min. over Ni Contact Plating in IDC Area: F = Flash Au over Ni Part Number for Strain Relief: FNS13-06400-1000 Applicable Cables (see Section D) AWG 28 stranded wire, AWG 30 solid wire, with 1.27mm pitch Outline Dimensions Applicable Tool for FNS Series Hand press: FX-003 Contact Details (contacts in rows A and C) 5.08 + – 0.1 Positioning Tool for FNS13 = Part No. 2.54 + – 0.1 0.80 Sockets and Connectors SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER (15.20) (1.80) FN-105 FNS Series DIN41612 - IDC Type Socket, 96 Leads Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range: 106MΩ min. at 500V DC 1,000V AC rms for 1 minute 20mΩ max. at 10mA 1A –65°C to +85°C Materials and Finish Housing: PBT (glass filled), UL 94V-0 rated Contacts: Copper Alloy Plating: Mating Face Contacts - Au over Nickel IDC Terminals - Au over Nickel Features 2.54mm pitch IDC type connectors for 0.847mm cable, conforming to DIN41612 standards of compatibility FNS13 - 096 00 -00 B F Series No. No. of Leads Terminal Type 00 = IDC Contact Plating in Mating Area: B = Au 0.3µm min. over Ni Contact Plating in IDC Area: F =Flash Au over Ni Part Number for Strain Relief: FNS13-06400-1000 Applicable Cables (see Section D) AWG 28 stranded wire, AWG 30 solid wire, with 1.27mm pitch Outline Dimensions Applicable Tool for FNS Series Contact Details (contacts in rows A, B and C) Hand press: FX-003 Positioning Tool for FNS13 = Part No. FN-105 SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Sockets and Connectors FNS Series (Cable) 33MIL (0.847mm), Hitachi Cable (150V, 105°C) Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Current Rating: Voltage Rating: Conductor Resistance: Characteristic Impedance: Capacity: Dimension: Operating Temp. Range: 5MΩ / km min. at 20°C 1,500V AC / min. 0.5A 150V max. 362Ω / km max. at 20°C 89Ω approx. (ground- signal- ground) 65pF / m at 1kHz (ground- signal- ground) AWG 30 –20°C to +105°C TFC30 - 96 (0.847) * Series No. No. of Conductors: 96 Packing Sizes: – = In Rolls (30.5 meters) / M = 1 meter Standard Cable Length Features 33MIL, 0.847mm pitch flat cable designed for termination with DIN41612 IDC connectors (96 pos.) ➭ AWG 30 (7/0.1mm) stranded Cu-wire ➭ UL Style No. 2678 see Part Number (Details) Applicable Tools for FNS Series Hand press: FX-003 Positioning Tools for FNS12: FN-106 FNS13: FN-105 Outline Cable Dimensions 80.47±0.2 (96 conductors) 81.31±0.25 (96 conductors) Sockets and Connectors SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER