SF10A01 THRU SF10A06 Glass Passivated Super Fast Recovery Rectifier Voltage Range 50 to 600 V Current 10.0 Ampere TO-220AC .06(1.52) .05(1.27) .148(3.74) .594(15.1) .587(14.9) PIN 1 .037(0.94) .027(0.68) .185(4.70) .175(4.44) 2 1 .56(14.22) .53(13.46) .11(2.79) .10(2.54) .025(0.64) .014(0.35) .205(5.20) .195(4.95) 2 .055(1.40) .045(1.14) .27(6.86) .23(5.84) DIA MAX.412(10.5) .154(3.91) MAX.05(1.5) Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic TO-220AC Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity:Color band denotes cathode Mounting position: Any Weight: 2.07 grams .16(4.06) .14(3.56) YENYO Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTIC SYMBOL SF 10A01 SF 10A02 SF 10A03 SF 10A04 SF 10A05 SF 10A06 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 600 V Maximum RMS Voltage VRMS 35 70 140 210 280 420 V VDC 50 100 200 300 400 600 V Maximum DC Blocking Voltage Maximum Average Forward Rectified 10.0 IF(AV) o Current TC=100 C A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load IFSM 200 VF 0.95 175 A (JEDEC method) Maximum Instantaneous Forward Voltage @ 10.0 A o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR 1.3 uA 250 uA nS Trr 35 Typical junction Capacitance (Note 2) CJ 65 Operating Junction and Storage Temperature Range V 10.0 Maximum Reverse Recovery Time (Note 1) Typical Thermal Resistance (Note 3) 1.7 R JC 2.2 TJ, TSTG -55 to +150 pF o CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to case. 1/2 R2, JUL-11 RATINGS AND CHARACTERISTIC CURVES SF10A01 THRU SF10A06 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 200 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 10.0 8.0 6.0 4.0 2.0 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 175 SF10A01-SF10A03 150 125 100 SF10A04-SF10A06 75 50 25 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o LEAD TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 SF10A01-SF10A03 SF10A04-SF10A05 10 SF10A06 1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 o TJ=125 C 100 10 o TJ=25 C 1 0.1 0 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R2, JUL-11