V512MEM2-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • RF Modems • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 480 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -113 Harmonic Suppression (2nd) -12 Tuning Voltage 0.5 Max Units 512 MHz dBc/Hz -11 dBc 2.5 Vdc MHz/V 23 Tuning Sensitivity (avg.) 2 dBm Input Capacitance 50 pF Pushing 2 MHz/V Pulling (12 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output -2 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 0 MINI-16M-LOW Min Typ Supply Voltage (Vcc, nom.) 3.3 Supply Current (Icc) 11 Vdc 14 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V512MEM2-LF Rev A1 Tuning Curve, typ. 525 520 FREQUENCY (MHz) 515 510 505 500 490 85 °C 25 °C 485 -40 °C 495 480 475 470 465 460 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 5 RECOMMENDED FOOTPRINT 4 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 3 2 1 0 -1 0.030 MIN. CUTBACK FROM LIVE PADS -2 -3 -4 -5 467 471 475 479 483 488 493 499 505 512 518 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 P4 REST Vt RF OUT Vcc MOD GROUND PACKAGE H MINI-16M 0.220 MINI-16M-LOW 0.160 MINI-16M-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B