V846ME03 PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Direct Broadcast • Satellite Up/Down Conversion • Microwave Radios £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3370 Typ Max Units 3540 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -90 dBc/Hz Harmonic Suppression (2nd) -25 dBc Tuning Voltage 1.5 11 MHz/V 55 Tuning Sensitivity (avg.) 4 dBm Input Capacitance 50 pF Pushing 10 MHz/V Pulling (14 dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Power Output -2 Load Impedance Operating Temperature Range 50 -35 Package Style Power Supply Requirements 1 Vdc MINI-14H-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 25 Vdc 30 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V846ME03 Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 3800 3700 3600 3500 3300 85 °C 25 °C 3200 -35 °C 3400 3100 3000 2900 0 1 2 3 4 5 6 7 8 9 10 11 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 9 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 7 5 3 0.030 MIN. CUTBACK FROM LIVE PADS 1 -1 -3 -5 3035 3131 3203 3265 3323 3378 3431 3484 3537 3592 3649 3708 FREQUENCY (MHz) 85 °C 25 °C -35 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B