V805ME03-LF PHASE NOISE (1 Hz BW, typical) Rev D4 Voltage-Controlled Oscillator Surface Mount Module Applications • Broadcast Communications • Satellite Communications • Earthstations £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2300 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -96 Harmonic Suppression (2nd) -15 Tuning Voltage 2 Max Units 2650 MHz dBc/Hz -13 dBc 9 Vdc MHz/V 64 Tuning Sensitivity (avg.) 8 dBm Input Capacitance 50 pF Pushing 4 MHz/V Pulling (14 dB Return Loss, Any Phase) 11 MHz 85 °C Max Units Power Output 2 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 5 MINI-14H Min Typ Supply Voltage (Vcc, nom.) 10 Supply Current (Icc) 17 Vdc 21 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V805ME03-LF Voltage-Controlled Oscillator Surface Mount Module Rev D4 Tuning Curve, typ. FREQUENCY (MHz) 2700 2660 2620 2580 2540 2500 2460 2420 2380 2340 2300 2260 2220 2180 2140 2100 2060 2020 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 12 11 10 9 8 7 6 5 4 3 2 1 0 2058 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS 2187 2279 2356 2425 2487 2546 2602 2655 2705 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B