NC7WZ04 TinyLogic® UHS Dual Inverter Features Description Ultra-High Speed: tPD 2.3ns (Typical) into 50pF at 5V VCC High Output Drive: ±24mA at 3V VCC Power Down High Impedance Inputs/Outputs The NC7WZ04 is a dual inverter from Fairchild’s UltraHigh Speed (UHS) series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs tolerate voltages up to 7V independent of VCC operating voltage. Proprietary Noise/EMI Reduction Circuitry Related Resources Ultra-Small MicroPak™ Packages Broad VCC Operating Range: 1.65V to 5.5V Matches Performance of LCX when Operated at 3.3V VCC Over-Voltage Tolerance Inputs Facilitate 5V to 3V Translation Space-Saving SC70 6-Lead Package MS-503 — Family Characteristics TinyLogic HS/HST and UHS Series ® Ordering Information Part Number Top Mark Eco Status Package Packing Method NC7WZ04P6X Z04 RoHS 6-Lead SC70, EIAJ SC88 1.25mm Wide 3000 Units on Tape & Reel NC7WZ04L6X A7 RoHS 6-Lead MicroPak™, 1.00mm Wide 5000 Units on Tape & Reel NC7WZ04FHX A7 Green 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 www.fairchildsemi.com NC7WZ04 — TinyLogic® UHS Dual Inverter December 2009 IEEE/IEC Figure 1. Logic Symbol Pin Configurations Figure 2. SC70 (Top View) Figure 3. MicroPak (Top Through View) NC7WZ04 — TinyLogic® UHS Dual Inverter Connection Diagrams Figure 4. Pin 1 Orientation Notes: 1. AAA represents product code top mark (see Ordering Information). 2. Orientation of top mark determines pin one location. 3. Reading the top mark left to right, pin one is the lower left pin. Pin Definitions Pin # SC70 Pin # MicroPak Name Description 1 1 A 2 2 GND 3 3 A Input 4 4 Y Output 5 5 VCC 6 6 Y Input Ground Supply Voltage Output Function Table Y= /A Inputs Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VIN VOUT IIK Parameter Min. Max. Unit Supply Voltage -0.5 7.0 V DC Input Voltage -0.5 7.0 V DC Output Voltage -0.5 7.0 V -50 mA DC Input Diode Current VIN < -0V IOK DC Output Diode Current VOUT < 0V -50 mA IOUT DC Output Source / Sink Current ±50 mA DC VCC or Ground Current ±100 mA +150 °C ICC or IGND TSTG Storage Temperature Range -65 TJ Junction Temperature Under Bias +150 °C TL Junction Lead Temperature (Soldering, 10 Seconds) +260 °C PD ESD Power Dissipation at +85°C SC70-6 180 MicroPak-6 130 MicroPak2-6 120 Human Body Model, JEDEC:JESD22-A114 4000 Charge Device Model, JEDEC:JESD22-C101 2000 NC7WZ04 — TinyLogic® UHS Dual Inverter Absolute Maximum Ratings mW V Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VCC VIN VOUT tr , tf TA Parameter Conditions Min. Max. Supply Voltage Operating 1.65 5.50 Supply Voltage Data Retention 1.5 5.5 V Input Voltage 0 5.5 V Output Voltage 0 VCC V VCC at 1.8V, 2.5V ±0.2V 0 20 VCC at 3.3V ± 0.3V 0 10 VCC at 5.0V ± 0.5V 0 5 -40 +85 Input Rise and Fall Times Operating Temperature SC70-6 θJA Unit Thermal Resistance ns/V °C 350 MicroPak-6 500 MicroPak2-6 560 °C/W Note: 4. Unused inputs must be held HIGH or LOW. They may not float. © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 www.fairchildsemi.com 3 Symbol Parameter VIH HIGH Level Input Voltage VIL LOW Level Input Voltage VCC TA=+25°C Conditions Min. 0.75VCC 2.30 to 5.50 0.70VCC 0.70VCC 0.25VCC 2.30 to 5.50 0.30VCC 0.30VCC 1.55 1.65 1.55 1.80 1.70 1.80 1.70 2.20 2.30 2.20 2.90 3.00 2.90 VIN=VIL, IOH=-100µA 4.50 HIGH Level Output Voltage 4.40 4.50 4.40 1.65 IOH=-4mA 1.29 1.52 1.29 2.30 IOH=-8mA 1.90 2.14 1.90 3.00 IOH=-16mA 2.40 2.75 2.40 3.00 IOH=-24mA 2.30 2.62 2.30 4.50 IOH=-32mA 3.80 4.13 LOW Level Output Voltage Input Leakage Current Power Off Leakage Current ICC Quiescent Supply Current 0.10 0.00 0.10 0.10 0.00 0.10 0.10 3.00 0.00 0.10 0.10 4.50 0.00 0.10 0.10 VIN=VIH, IOL=100µA V 1.65 IOL=4mA 0.80 0.24 0.24 2.30 IOL=8mA 0.10 0.30 0.30 3.00 IOL=16mA 0.16 0.40 0.40 3.00 IOL=24mA 0.24 0.55 0.55 4.50 IOL=32mA 0.25 0.55 0.55 0 ≤ VIN ≤ 5.5V ±1 ±1.0 µA VIN or VOUT=5.5V 1 10 µA 1 10 µA 0 to 5.5 0 1.65 to 5.50 VIN=5.5V, GND © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 3.80 0.10 2.30 V V 0.10 1.80 IOFF V 0.25VCC 1.65 Units Max. 1.65 to 1.95 1.65 IIN Min. 0.75VCC 3.00 VOL Max. 1.65 to 1.95 2.30 VOH Typ. TA=-40 to +85°C NC7WZ04 — TinyLogic® UHS Dual Inverter DC Electrical Characteristics www.fairchildsemi.com 4 Symbol Parameter VCC Propagation Delay Typ. Max. Min. Max. 1.65 1.8 5.3 9.2 1.8 11.0 1.80 1.8 4.4 7.6 1.8 8.4 1.2 3.0 5.1 1.2 5.6 0.8 2.2 3.4 0.8 3.8 CPD CL=15pF, RL=1MΩ 3.30 ± 0.30 5.00 ± 0.50 0.5 1.8 2.8 0.5 3.1 3.30 ± 0.30 1.2 2.9 4.5 1.2 5.0 0.8 2.3 3.6 0.8 4.0 5.00 ± 0.50 CIN Conditions Min. 2.50 ± 0.20 tPLH, tPHL TA=-40 to +85°C TA=+25°C CL=50pF, RL=500Ω Input Capacitance 0.00 2.5 Power Dissipation Capacitance(5) 3.30 9 5.00 11 Units Figure ns Figure 5 Figure 6 pF pF Figure 7 Note: 5. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic operating current by the expression: ICCD=(CPD)(VCC)(fIN)+(ICCstatic). NC7WZ04 — TinyLogic® UHS Dual Inverter AC Electrical Characteristics Notes: 6. CL includes load and stray capacitance. 7. Input PRR = 1.0MHz, tW = 500ns. Figure 5. AC Test Circuit Figure 6. AC Waveforms Note: 8. Input=AC Waveform; tr=tf=1.8ns. 9. PRR=Variable; Duty Cycle=50%. Figure 7. ICCD Test Circuit © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 www.fairchildsemi.com 5 NC7WZ04 — TinyLogic® UHS Dual Inverter Physical Dimensions SYMM C L 2.00±0.20 0.65 A 0.50 MIN 6 4 B PIN ONE 1.25±0.10 1 1.90 3 0.30 0.15 0.10 (0.25) 0.65 0.40 MIN A B 1.30 LAND PATTERN RECOMMENDATION 1.30 1.00 0.80 SEE DETAIL A 1.10 0.80 0.10 C 0.10 0.00 C 2.10±0.30 SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE (R0.10) 0.25 0.10 0.20 A) THIS PACKAGE CONFORMS TO EIAJ SC-88, 1996. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE BURRS OR MOLD FLASH. D) DRAWING FILENAME: MKT-MAA06AREV6 30° 0° 0.46 0.26 DETAIL A SCALE: 60X Figure 8. 6-Lead, SC70, EIAJ SC88, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specification Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf. Package Designator P6X © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 6 NC7WZ04 — TinyLogic® UHS Dual Inverter Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.49) 5X 1.00 (0.75) (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X 0.25 0.15 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X BOTTOM VIEW DETAIL A PIN 1 TERMINAL 0.075 X 45 CHAMFER (0.13) 4X Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 9. 6-Lead, MicroPak™, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specification Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. Package Designator L6X © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 7 NC7WZ04 — TinyLogic® UHS Dual Inverter Physical Dimensions DETAIL A 5X Figure 10. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specification Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf. Package Designator FHX © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 8 NC7WZ04 — TinyLogic® UHS Dual Inverter © 1999 Fairchild Semiconductor Corporation NC7WZ04 • Rev. 1.0.2 www.fairchildsemi.com 9