NC7SVL04 TinyLogic® Low-ICCT Inverter Features Description The NC7SVL04 is a single inverter with a low-ICCT input design from Fairchild’s Ultra-Low Power (ULP-A) series ® of TinyLogic . The NC7SVL04 features very low quiescent current, even when the input voltage is lower than the VCC supply. This feature services mobile handset applications very well, allowing for direct interface with baseband processor general-purpose I/Os. Since mobile devices rely on a battery supply, the NC7SVL04 facilitates lower power consumption in mixed-voltage rail environments. 0.9V to 3.6V VCC Supply Operation 3.6V Over-Voltage Tolerant I/Os at VCC from 0.9V to 3.6V Power-Off High Impedance Inputs and Outputs Ultra-Small MicroPak™ Package Proprietary Quiet Series™ Noise / EMI Reduction Circuitry Ultra-Low Dynamic Power This product is designed on an advanced CMOS technology for a wide low-voltage operating range (0.9V to 3.6V VCC), high drive needs (up to 24mA), and speed (maximum propagation delay of 3.5ns, VCC=3.3V). It achieves this performance while maintaining low CMOS power dissipation. Ordering Information Part Number Top Mark NC7SVL04P5X L04 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on Tape & Reel NC7SVL04L6X CD 6-Lead MicroPak™, 1.00mm Wide 5000 Units on Tape & Reel NC7SVL04FHX CD 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 Package Packing Method www.fairchildsemi.com NC7SVL04 — TinyLogic® Low-ICCT Inverter November 2010 NC7SVL04 — TinyLogic® Low ICCT Inverter Connection Diagram IEEE/IEC Figure 1. Logic Symbol Pin Configurations Figure 2. SC70 (Top View) Figure 3. MicroPak™ (Top Through View) Pin Definitions Pin # SC70 Pin # MicroPak™ Name Description 1 1 NC 2 2 A 3 3 GND Ground 4 4 Y Output 5 6 VCC Supply Voltage 5 NC No Connect No Connect Input Function Table Y=/A Inputs Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 4.6 V VIN DC Input Voltage -0.5 4.6 V -0.5 VCC + 0.5 -0.5 4.6 VOUT IIK IOK IOH / IOL DC Output Voltage DC Input Diode Current DC Output Diode Current HIGH or LOW State (1) VCC=0V VIN < 0V -50 VOUT < 0V -50 VOUT > VCC +50 DC Output Source/Sink Current ICC or IGND DC VCC or Ground Current per Supply Pin TSTG Storage Temperature Range -65 V mA mA ±50 mA ±50 mA +150 °C TJ Junction Temperature Under Bias +150 °C TL Junction Lead Temperature, Soldering 10 Seconds +260 °C SC70-5 PD ESD Power Dissipation at +85°C NC7SVL04 — TinyLogic® Low ICCT Inverter Absolute Maximum Ratings 150 MicroPak™-6 130 MicroPak2™-6 120 Human Body Model, JEDEC:JESD22-A114 4000 Charge Device Model, JEDEC:JESD22-C101 2000 mW V Note: 1. IO absolute maximum ratings must be observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter VCC Supply Voltage VIN Input Voltage VOUT IOH/IOL TA Δt/ΔV θJA Output Voltage Output Current in IOH/IOL Conditions Min. Max. Unit 0.9 3.6 V 0 3.6 V VCC=0V 0 3.6 HIGH or LOW State 0 VCC VCC=3.0V to 3.6V ±24.0 VCC=2.3V to 2.7V ±18.0 VCC=1.65V to 1.95V ±6.0 VCC=1.4V to 1.6V ±4.0 VCC=1.1V to 1.3V ±2.0 VCC=0.9V ±0.1 Operating Temperature, Free Air Minimum Input Edge Rate Thermal Resistance -40 V mA +85 °C VIN=0.8V to 2.0V, VCC=3.0V 10 ns/V SC70-5 425 MicroPak™-6 500 MicroPak2™-6 560 °C/W Note: 2. Unused inputs must be held HIGH or LOW. They may not float. © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 www.fairchildsemi.com 3 Symbol VIH VIL Parameter HIGH Level Input Voltage LOW Level Input Voltage VCC Conditions TA=25°C Min. Min. .65 x VCC .65 x VCC 1.10 ≤ VCC ≤ 1.30 .65 x VCC .65 x VCC 1.40 ≤ VCC ≤ 1.60 .65 x VCC .65 x VCC 1.65 ≤ VCC ≤ 1.95 0.90 .0.90 2.30 ≤ VCC ≤ 2.70 1.50 1.50 2.70 ≤ VCC ≤ 3.60 1.50 1.50 Max. 0.90 .25 x VCC .25 x VCC .25 x VCC .25 x VCC 1.40 ≤ VCC ≤ 1.60 .25 x VCC .25 x VCC 1.65 ≤ VCC ≤ 1.95 .25 x VCC .25 x VCC 2.30 ≤ VCC ≤ 2.70 0.70 0.70 0.80 VCC-0.10 VCC-0.10 1.10 ≤ VCC ≤ 1.30 VCC-0.10 VCC-0.10 1.40 ≤ VCC ≤ 1.60 VCC-0.20 VCC-0.20 VCC-0.20 VCC-0.20 2.30 ≤ VCC ≤ 2.70 VCC-0.20 VCC-0.20 2.70 ≤ VCC ≤ 3.60 VCC-0.20 VCC-0.20 1.10 ≤ VCC ≤ 1.30 IOH=-2mA .75 x VCC .75 x VCC 1.40 ≤ VCC ≤ 1.60 IOH=-4mA .75 x VCC .75 x VCC 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 2.30 ≤ VCC ≤ 2.70 2.70≤ VCC ≤ 3.60 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 2.70 ≤ VCC ≤ 3.60 IOH=-6mA IOH=-12mA IOH=-18mA IOH=-24mA 1.25 1.25 2.00 2.00 1.80 1.80 2.20 2.20 1.70 1.70 2.40 2.40 2.20 V 0.80 0.90 IOH=-100µA Units V 1.10 ≤ VCC ≤ 1.30 1.65 ≤ VCC ≤ 1.95 HIGH Level Output Voltage Max. 0.90 2.70 ≤ VCC ≤ 3.60 VOH TA=-40 to +85°C NC7SVL04 — TinyLogic® Low ICCT Inverter DC Electrical Characteristics V 2.20 Continued on the following page… © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 www.fairchildsemi.com 4 Symbol Parameter VCC LOW Level Output Voltage Min. ICC Quiescent Supply Current ICCT Increase in ICC per Input Units 0.10 0.10 1.40 ≤ VCC ≤ 1.60 0.20 0.20 0.20 0.20 2.30 ≤ VCC ≤ 2.70 0.20 0.20 2.70 ≤ VCC ≤ 3.60 0.20 0.20 1.10 ≤ VCC ≤ 1.30 IOL=2mA 0.25 x VCC 0.25 x VCC 1.40 ≤ VCC ≤ 1.60 IOL=4mA 0.25 x VCC 0.25 x VCC 1.65 ≤ VCC ≤ 1.95 IOL=6mA 0.30 0.30 2.30 ≤ VCC ≤ 2.70 0.40 0.40 0.40 0.40 0.60 0.60 0.40 0.40 0.55 0.55 0 ≤ VIN ≤ 3.60V ±0.1 ±0.5 µA 0 ≤ (VIN, VO) ≤ 3.60V 0.5 0.5 µA VIN=VCC or GND 0.9 0.9 IOL=100µA IOL=12mA IOL=18mA 2.70 ≤ VCC ≤ 3.60 IOL=24mA Power Off Leakage Current Max. 1.10 ≤ VCC ≤ 1.30 2.70 ≤ VCC ≤ 3.60 IOFF Min. 0.10 2.30 ≤ VCC ≤ 2.70 IIN Max. 0.10 2.70 ≤ VCC ≤ 3.60 Input Leakage Current TA=-40 to 85°C 0.90 1.65 ≤ VCC ≤ 1.95 VOL TA=25°C Conditions 0.90 to 3.60 0 0.90 to 3.60 VCC ≤ VIN ≤ 3.60V ±0.9 1.95 VIN=0.9V 6 8 3.60 VIN=1.5V 6 8 V NC7SVL04 — TinyLogic® Low ICCT Inverter DC Electrical Characteristics (Continued) µA µA AC Electrical Characteristics Symbol Parameter Conditions 0.90 CL=15pF, RL=1MΩ 1.10 ≤ VCC ≤ 1.30 tPHL, tPLH Propagation Delay TA=25°C VCC 1.40 ≤ VCC ≤ 1.60 Min. CL=15pF, RL=2kΩ 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 CIN Input Capacitance 0 CPD Power Dissipation Capacitance 0.90 to 3.60 © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 CL=30pF, RL=500Ω VIN=0V or VCC, f=10MHz Typ. TA=-40 to 85°C Max. Min. Max. Units Figure 34.0 3.5 8.1 16.5 3.0 27.8 1.5 3.7 7.0 1.5 7.5 1.1 2.8 5.8 1.0 6.3 0.6 2.0 4.0 0.6 4.5 0.5 1.5 3.5 0.5 4.0 ns 3 pF 5 pF Figure 4 Figure 5 www.fairchildsemi.com 5 NC7SVL04 — TinyLogic® Low ICCT Inverter AC Loadings and Waveforms Figure 4. AC Test Circuit Figure 5. AC Waveforms VCC Symbol 3.3V ± 0.3V 2.5V ± 0.2V 1.8V ± 0.15V 1.5V ± 0.1V 1.2V ± 0.1V 0.9V Vmi 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 Vmo 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 www.fairchildsemi.com 6 NC7SVL04 — TinyLogic® Low ICCT Inverter Physical Dimensions Figure 6. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf. Package Designator P5X © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 7 NC7SVL04 — TinyLogic® Low ICCT Inverter Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.254) (0.49) 5X 1.00 (0.75) PIN 1 IDENTIFIER 5 (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X 0.25 0.15 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X DETAIL A PIN 1 TERMINAL 0.075 X 45 CHAMFER (0.13) 4X BOTTOM VIEW Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 4. FILENAME AND REVISION: MAC06AREV4 5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY OTHER LINE IN THE MARK CODE LAYOUT. Figure 7. 6-Lead, MicroPak™, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. Package Designator L6X © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 8 NC7SVL04 — TinyLogic® Low ICCT Inverter Physical Dimensions 0.89 0.35 0.05 C 1.00 2X B A 5X 0.40 PIN 1 MIN 250uM 0.66 1.00 1X 0.45 6X 0.19 0.05 C TOP VIEW RECOMMENDED LAND PATTERN FOR SPACE CONSTRAINED PCB 2X 0.90 0.05 C 0.35 0.55MAX C 5X 0.52 SIDE VIEW 0.73 (0.08) 4X 1 DETAIL A 2 1X 0.57 0.09 0.19 6X 3 0.20 6X ALTERNATIVE LAND PATTERN FOR UNIVERSAL APPLICATION (0.05) 6X 5X 0.35 0.25 6 5 4 0.35 0.60 (0.08) 4X 0.10 .05 C C B A 0.40 0.30 BOTTOM VIEW NOTES: A. COMPLIES TO JEDEC MO-252 STANDARD B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994 D. LANDPATTERN RECOMMENDATION IS BASED ON FSC DESIGN. E. DRAWING FILENAME AND REVISION: MGF06AREV3 0.075X45° CHAMFER DETAIL A PIN 1 LEAD SCALE: 2X Figure 8. 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf. Package Designator FHX © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 9 NC7SVL04 — TinyLogic® Low ICCT Inverter © 2008 Fairchild Semiconductor Corporation NC7SVL04 • Rev. 1.0.4 www.fairchildsemi.com 10