ADVANTECH PCLD-782B

PCM-3712
PCM-3718H/HG/HO
PCM-3724
PCM-3712
PCM-3724
Specifications
 Good selection of output ranges, including current
loop, unipolar and bipolar.
Analog Input
Specifications


Analog Output
Channels
Resolution
Output Rate
Output Range
Internal
Reference
2
12 bits
Static update
Unipolar (V)
0 ~ 5, 0 ~ 10
Bipolar (V)
± 2.5, ±5, ±10
Current Loop
4 ~ 20 mA
External Reference
 Slew Rate
±10 V
0.3 V/µs typ. (Voltage)
1.2 mA/µs (Current)
±5 mA
0.1 Ω max./0.02 Ω typ.
 Driving Capability
 Output Impedance
 Accuracy
Relative: ±1 LSB
Differential Non-Linearity ±1/2 LSB
General







48-ch Digital I/O PC/104 Module
PCM-3718H/HG/HO
Features




2-ch, 12-bit Analog Output PC/104 Module
100KS/s, 12-bit, 16-ch PC/104 Multifunction
Module
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storing Temperature
Storing Humidity
PC/104
1 x 10-pin box header
96 x 90 mm (3.8"x 3.5")
5 V @ 700 mA max.
0 ~ 60° C (32 ~ 140° F)
-20 ~ 85° C (-4 ~185° F)
0 ~ 90% RH,
noncondensing
Ordering Information
 PCM-3712
 ADAM-3909
2-ch Analog Output
Module
(18 cm flat cable 10-pin
to DB9-F included)
DB9 cable wiring for
DIN-rail mounting
Features
 Channels




16 single-ended,
or 8 differential inputs
Resolution
12 bits
Max. Sampling Rate
100 kHZ* (DMA transfer)
*80 kHz on P4-based (or upper) system.
Input Impedance
10 MΩ
Sampling Modes
Software, pacer or ext.
Input Range
80 kHz on P4-based (or upper) system.
PCM-3718H and PCM-3718HO
 Bipolar
 Unipolar
±10, ±5, ±2.5, ±1.25, ±0.625
0 ~ 10, 0 ~ 5, 0 ~ 2.5, 0 ~ 1.25
PCM-3718HG
 Bipolar
±10, ±5, ±1, ±0.5, ±0.1, ±0.05,
±0.01, ±0.005
0 ~ 10, 0 ~ 1, 0 ~ 0.1, 0 ~ 0.01
 Unipolar
Analog Output (PCM-3718HO only)
 Channels
 Output Rate
 Output Range
1 (12 bits)
Static update
Internal Reference
Unipolar (V)
External Reference (V)




Slew Rate
Driving Capability
Output Impedance
Accuracy
0 ~ 5, 0 ~ 10
0 ~10, 0 ~ -10
10 V/µs
10 mA
0.1 Ωmax.
Relative: ±1 LSB
Digital Input/Output
 Channels
 Input Voltage
16, 5V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Output Voltage
Logic 0: 0.33 V max. @ 6 mA (sink)
Logic 1: 3.84 V min. @ 6 mA (source)
 Output status read back
 Channels simulate 8255 PPI mode 0
 Interrupt triggering, rising/falling edge
Specifications
Digital Input
 Channels
 Compatibility
 Input Voltage
48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
 Interrupt Capable Ch. 1
Digital Output
 Channels
48 (shared with input)
 Compatibility
5 V/TTL
 Output Voltage
Logic 0: 0.5 V max. @ 6 mA (sink)
Logic 1: 2.0 V min. @ -6 mA (source)
General






Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Operating Temperature
Storing Temperature
 Storing Humidity
General
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PC/104
2 x 20-pin box header
96 x 90 mm (3.8" x 3.5")
Typical: 5 V @ 180 mA
Max.: 5 V @ 400 mA
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storing Temperature
-40 ~ 85°C (-40 ~ 185° F)




Ordering Information
 PCM-3724
 ADAM-3950
Ordering Information
 PCM-3718H
 PCM-3718HG  PCM-3718HO
 ADAM-3920
 PCLD-780
 PCL-10120-1
 PCL-10120-2
12-bit Multifunction
Module w/Programmable
Gain (cable not included)
PCM-3718H w/high gain
PCM-3718H w/AO
20-pin flat cable wiring
terminal for DIN-Rail
Screw-terminal board for
20-pin flat cable
20-pin flat cable, 1 m
20-pin flat cable, 2 m
PC/104
2 x 50-pin box header
96 x 90 mm (3.8"x 3.5")
5 V @ 90 mA
0 ~ 60° C (32 ~ 140° F)
-40 ~ 85° C
(-40 ~185° F)
0 ~ 90% RH,
non-condensing
 PCLD-785B
 PCLD-782B
 PCL-10150-1.2
Online Download www.advantech.com/products
48-ch DI/O Module
(cable not included)
50-pin flat cable wiring
terminal for DIN-Rail
mounting
24-ch Relay Output
Board
24-ch Opto-isolated DI
Board
50-pin flat cable, 1.2 m